TIA-664 602-B-2007 Wireless Features Description Wireless Messaging Teleservice.pdf

《TIA-664 602-B-2007 Wireless Features Description Wireless Messaging Teleservice.pdf》由会员分享，可在线阅读，更多相关《TIA-664 602-B-2007 Wireless Features Description Wireless Messaging Teleservice.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-664.602-B (Revision of TIA-664.602-A) October 2007Wireless Features Description: Wireless Messaging Teleservice ANSI/TIA-664.602-B-2007 APPROVED: OCTOBER 10, 2007 REAFFIRMED: JANUARY 31, 2013 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eli

2、minating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall

3、 not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationall

4、y. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This

5、Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before i

6、ts use. (From Project No. SP-3-4652.602-RV2-RF1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in th

7、e standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consi

8、sting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or

9、 validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or re

10、present that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development o

11、r publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or in

12、vestigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) In

13、formation as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, ins

14、pect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIAT

15、ENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH

16、 ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY

17、 USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIG

18、ENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-664.602-B 1 2 3 4 5 6 7 8 9 10 11 12

19、 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 602-i Contents Wireless Features Description: Wireless Messaging Teleservice Contents Revision Historyii 1 Wireless Messaging Teleservice (WMT) .3 1.1 Norm

20、al Procedures with Successful Outcome6 1.2 Exception Procedures or Unsuccessful Outcome .8 1.3 Alternative Procedures .8 1.4 Interactions with Other Wireless Services8 TIA-664.602-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 4

21、3 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Revision History 602-ii Revision History Revision Date Remarks IS-53, Revision 0 August 1991 Initial publication IS-53, Revision A May 1995 Updated publication ANSI/TIA/EIA-664, Revision 0 June 1996 Initial ANSI publication ANSI/TIA/EIA/664-602-A

22、July 2000 Updated ANSI publication TIA-664.602-B September 2007 Updated publication TIA-664.602-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 602-3 Wireless Messaging Telese

23、rvice (WMT) 1 Wireless Messaging Teleservice (WMT) The Wireless Messaging Teleservice (WMT) conveys and manages short messages to a Short Message Entity (SME) for display, storage, or both. Upper case, lower case, accented, and unaccented characters are supported. Control characters, such as tab, en

24、d-of-line, carriage return, and backspace should also be supported. This teleservice should coordinate the use of the display and arbitrate between conflicting users or services. Terminal mechanisms should be provided for viewing messages too large to be viewed at once. Terminal mechanisms should be

25、 provided for displaying of multiple messages. Terminal mechanisms may allow storing, retrieving, and deleting messages. These mechanisms may be automated or require some manual intervention. The alphanumeric display may support any or all of the following character sets: ITU T.50 International Refe

26、rence Alphabet (IRA) (formerly International Alphabet No. 5, or IA5) ISO 8859 Information Processing - 8-bit single octet coded graphic character sets ISO 10646 Universal Multiple-Octet Coded Character Set (UCS), Basic Multilingual Plane only IS-90 Extended Protocol Message (TIA/EIA/IS-90 Section 3.

27、7.1 and TIA/EIA/IS-90 Appendix B) Shift-JIS variable 1-2 byte nonmodal encoding for Kanji, Kana, and Latin character sets defined in JIS X0201 and JIS X0206 KS X 1001:1998 variable 1-2 byte encoding method used in Korea If the alphanumeric display supports multiple character sets, then the alphanume

28、ric display should be able to accommodate more than one character set in a message. If the MS does not support a character set specified by the transmitting network, an indication shall be presented to the user that the Short Message information was available, but was presented in an unsupported cha

29、racter set. For messages requiring immediate delivery only one message delivery attempt is made per service request. For messages not requiring immediate delivery, one or more delivery attempts are made until an acknowledgment is received. Each message includes attributes for management of the messa

30、ges received by the SME. These attributes include the following: WMT Message Type The WMT Message Type attribute identifies the basic type of message as: a. A teleservice request. b. An acknowledgment of the delivery of a teleservice request (DAK). c. A manual acknowledgment (MAK) of a teleservice r

31、equest. TIA-664.602-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Wireless Messaging Teleservice (WMT) 602-4 Reply Option The Reply Option attribute allows for requesting va

32、rious teleservice acknowledgment options, including: a. Manual acknowledgment (MAK) requested. b. Delivery acknowledgment (DAK) requested. The teleservice acknowledgment requests are independent of each other and may be selected on a per teleservice basis as well as a per message basis. It is possib

33、le to request no teleservice acknowledgments. Manual acknowledgment is sent when requested to the originating SME by the destination application or teleservice when the destination user (not the destination SME) manually acknowledges the message. Delivery acknowledgment is sent when requested to the

34、 originating SME by the network to the originating SME when the message was delivered to the destination SME. User Data The User Data attribute contains the body of the message being conveyed. User Response Code The User Response Code attribute contains a numeric value corresponding to a user respon

35、se. The User Response Code consists of four bits. Message Encoding Version number of the protocol, an alphabet identifier, and handling requested for control characters. Message Updating Optional Some messages can update previous versions of the same message, such as delivery notifications or inform

36、ation distribution. Messages may contain an attribute to indicate recommended update treatment: Update (overwrite the previously received message using the same bearer service Message Identifier) New (do not overwrite previously received messages) Message Identifier Optional Each message may contain

37、 a Message Identifier. This allows for association of manual and delivery acknowledgment messages with the initial request message. This identifier may also be used by some teleservices to overwrite or update messages with similar information. The Message Identifier is unique to a message originator

38、-destination pair. The identifier should be 16 bits. Validity Period Optional Some messages can be valuable for a long time, while others are valuable for only a short time. This attribute may be used to indicate the amount of time a SME should retain a TIA-664.602-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14

39、 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 602-5 Wireless Messaging Teleservice (WMT) message that has been received, as well as to indicate the amount of time a store-and-forward service should retain a

40、message pending delivery. This attribute has the following values: Indefinite (For an MS, message should be retained until manually deleted by the recipient. For a store-and-forward service, message should be retained until delivered). Definite (message should be retained for the indicated period of

41、 time between one minute to one month). Power down (message should be retained until the MS is powered down). Registration area (message should be retained until the mobile leaves the current registration area). No retention (message should be delivered immediately and need not be retained). Message

42、s at the Message Center may be deleted for administrative reasons. Priority Indicator Optional Some messages are more important than others especially when contending for the display. The priority indicator allows the SME to manage the messages that it receives. The following is a list of the priori

43、ty indications: Emergencymessage sent for a situation where life or property are in immediate danger. Urgentmessage requires an immediate reply. Interactivemessage sent in response to callers activity (advice of charging, call progress messages, etc.). Those messages, which are generated and deliver

44、ed as the normal course of call processing, are beyond the scope of this description. Interactive messages may also include messages from dial up information retrieval services. Normalmessage sent without priority. Emergency messages shall take priority over all other types. SMEs may implement local

45、 prioritization of incoming messages based on calling party address or other criteria. Alert on Message Delivery Optional This indication allows a message to request audible alerting (vibrating or other annunciation at the MS option). This option may simulate pagers. Message Center Time Stamp Option

46、al Some messages may include a Message Center Time Stamp to inform the recipient of the Coordinated Universal Time (UTC) and date that the message was accepted by the destination Message Center (MC). Language Indicator Optional The language of the message is indicated so that the receiving MS can di

47、scard those messages that are not in the MSs preferred language. TIA-664.602-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Wireless Messaging Teleservice (WMT) 602-6 Privacy

48、 Indicator Optional The Privacy Indicator attribute contains an indication as to the privacy of the information being conveyed. Its usage is application dependent. It has the following values: Unrestricted Restricted Confidential Secret Display Indicator (Optional) Messages may include a Display Ind

49、icator attribute that may identify display handling requirements. The values of the Display Indicator are: Display the message until the Validity Period expires or the message is updated. Store the message without display unless retrieved by the recipient. Deferred Delivery Time Optional Each message may contain a Deferred Delivery Time attribute. This time may be used to delay the delivery of a message. The time may be specified as a relative time (delay for a period of hours, minutes, or seco