TIA-664 536-B-2007 Wireless Features Description Group 3 Analog Facsimile Service (G3 Afax).pdf

《TIA-664 536-B-2007 Wireless Features Description Group 3 Analog Facsimile Service (G3 Afax).pdf》由会员分享，可在线阅读，更多相关《TIA-664 536-B-2007 Wireless Features Description Group 3 Analog Facsimile Service (G3 Afax).pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-664.536-B (Revision of TIA-664.536-A) October 2007Wireless Features Description: Group 3 Analog Facsimile Service (G3 Afax) ANSI/TIA-664.536-B-2007 APPROVED: OCTOBER 23, 2007 REAFFIRMED: JANUARY 31, 2013 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest

2、 through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Public

3、ations shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or in

4、ternationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Public

5、ation. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitati

6、ons before its use. (From Project No. SP-3-4652.536-RV2-RF1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or c

7、hanged in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. Wh

8、en IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into,

9、the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not w

10、arrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, d

11、evelopment or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to

12、search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply;

13、and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not

14、certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS O

15、R APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COM

16、PLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR REL

17、ATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCL

18、UDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-664.536-B 1 2 3 4 5 6 7

19、8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 536-i Contents Wireless Features Description: Group 3 Analog Fax Contents List of Figures .ii Revision Historyii 1 Group 3 Analog Facsimile Ser

20、vice (G3 AFax).1 1.1 Normal Procedures with Successful Outcome2 1.2 Exception Procedures or Unsuccessful Outcome .4 1.3 Alternative Procedures .4 1.4 Interactions with Other Wireless Services5 TIA-664.536-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

21、35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 List of Figures 536-ii List of Figures Figure 1: Wireless Access Subscriber Unit.1 Revision History Revision Date Remarks ANSI/TIA/EIA/664-536 August 1999 Initial publication TIA-664.536-A December 2000 Updated ANSI public

22、ation TIA-664.536-B September 2007 Updated publication TIA-664.536-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 536-1 Group 3 Analog Fax (G3 AFax) 1 Group 3 Analog Facsimil

23、e Service (G3 AFax) A standard Group 3 facsimile machine1uses a 2 wire loop interface (the RJ-11 in North America) to connect to the PSTN. Through this analog, voice band, connection, the machine communicates with another fax machine using the appropriate G3 fax protocols. Supporting the operation o

24、f such fax machines is necessary in a wireless telephone system where subscribers expect to use their standard fax machines to send and receive faxes through their wireless subscriber unit. The G3 AFax Service shall allow digital wireless subscribers to send and receive faxes using standard Group 3

25、fax machines and fax modems. The fax machine connects to the Wireless Access Subscriber Unit (WASU), sometimes called a Fixed Wireless Terminal (FWT), through the 2 wire loop interface as it would to the PSTN. The figure below shows one possible configuration. It should be noted that the WASU or FWT

26、 can be stationed either inside or outside the subscribers premises. Subscriber mobility while using this service is not precluded. WirelessAccessSubscriberUnitRJ-11Fax MachineFigure 1: Wireless Access Subscriber Unit G3 AFax service shall perform the necessary data and protocol conversions between

27、the 2 wire loop interface, the wireless digital network, and the PSTN to allow the proper transmission of fax documents. This shall be done in a manner that is transparent to the G3 analog fax machines involved in the fax transaction. WASU originated service may be one of two types: Automatic G3 AFa

28、x or Dial-Prefix Selected Service. WASU terminated service may be one of four types: Automatic G3 AFax, G3 AFax DN, Two-Stage Dialing, or Pre-selection. 1The term “fax machine” is used to describe a standard fax machine, a fax modem connected to a computer, or any other fax device that operates acco

29、rding to the ITU-T T.30 Group 3 fax protocol. TIA-664.536-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Group 3 Analog Fax (G3 AFax) 536-2 Applicability to Telecommunication

30、s Services G3 AFax is applicable to data telecommunication services. 1.1 Normal Procedures with Successful Outcome Authorization G3 AFax may be provided after prearrangement with the service provider, or may be made generally available by the service provider. Deauthorization If G3 AFax is provided

31、after prearrangement with the service provider, the service shall be deauthorized at the subscribers request or for administrative reasons. Registration G3 AFax has no registration. Deregistration G3 AFax has no deregistration. Activation G3 AFax shall be activated upon authorization and invocation.

32、 Deactivation G3 AFax shall be deactivated by any of the following: Deauthorization; Either fax machine hanging up; Detection of fax messages requesting a change to voice service (operator interrupt requests). Invocation WASU Origination WASU originated service may be one of two types: Automatic G3

33、AFax or Dial-Prefix Selected Service (at least one of these options must be supported). Automatic G3 AFax This method relies on the sending of fax tones or messages by either fax machine indicating the start of a fax transaction. A wireless subscriber originates a G3 AFax call TIA-664.536-B 1 2 3 4

34、5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 536-3 Group 3 Analog Fax (G3 AFax) from the fax machine to a terminating party (a PSTN user or another wireless subscriber) by dialing th

35、e directory number of the terminating party. The terminating fax machine answers the call in auto-answer mode and the two machines automatically begin the fax transaction. This type of origination shall support multiple services on a single directory number and should also support a directory number

36、 dedicated to fax. In another case, the call is answered manually as a voice call, and when the fax machines are made ready, the users manually switch their fax machines to start the fax transaction. In another case, the terminating fax machine answers the call in auto-answer mode. Upon hearing the

37、fax tones, the wireless subscriber manually directs the fax machine to start the fax transaction. Dial-Prefix Selected Service A wireless subscriber originates a G3 AFax call from the fax machine to a terminating party using a dial-prefix for G3 AFax service. The calling fax machine dials the dial-p

38、refix followed by the directory number of the terminating fax machine. The terminating fax machine answers the call in auto-answer mode and the two machines automatically begin the fax transaction. WASU Termination WASU terminated service may be one of four types: Automatic G3 AFax, G3 AFax DN, Two-

39、Stage Dialing, or Pre-selection (at least one of these options must be supported). Automatic G3 AFax This type of termination relies on the sending of fax tones or messages by either fax machine indicating the start of a fax transaction. The originating party (PSTN or another wireless user) starts a

40、 G3 AFax call to a terminating wireless subscriber by dialing the directory number of the subscriber. The terminating fax machine answers the call in auto-answer mode and the two machines automatically begin the fax transaction. In another case, the call is answered manually as a voice call, and whe

41、n the fax machines are made ready, the users manually switch their fax machines to start the fax transaction. In another case, the terminating fax machine answers the call in auto-answer mode. Upon hearing the fax tones, the originating party manually directs the originating fax machine to start the

42、 fax transaction. G3 AFax DN The terminating party has a separate DN for the G3 AFax service which the originating fax equipment dials to start the call. The terminating fax machine answers the call in auto-answer mode and the two machines automatically begin the fax transaction. Two-Stage Dialing T

43、he wireless carrier has one or more DNs for G3 AFax service. Because the number is related to the service, it is shared by all wireless subscribers. An originating party places a call to one of the G3 AFax DNs. The number selected corresponds to the requested G3 AFax service. When the G3 AFax servic

44、e returns dial tone, the originating partys fax machine dials the terminating wireless subscribers DN. The terminating fax machine answers the call in auto-answer mode and the two machines automatically begin the fax transaction. TIA-664.536-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

45、 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Group 3 Analog Fax (G3 AFax) 536-4 Pre-selection Either party places a voice call to the other party. They agree to send a fax and the receiving subscriber sets the WASU so that the nex

46、t call will be received in AFax mode. Call Detail Record The system should record call detail information for the elapsed time for Voice and Fax. See DMH for the specific information to be included for each element. 1.2 Exception Procedures or Unsuccessful Outcome Registration None identified. Dereg

47、istration None identified. Activation None identified. Deactivation None identified. Invocation If G3 AFax cannot be established for the end-to-end call, or if the call is interrupted in progress, the network may clear the call. The fax machines shall be provided an indication that the call has fail

48、ed. Exceptions While Roaming None identified. Exceptions During Intersystem Handoff May not be applicable. 1.3 Alternative Procedures None identified. TIA-664.536-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

49、49 50 51 52 53 54 55 56 57 58 59 60 536-5 Group 3 Analog Fax (G3 AFax) 1.4 Interactions with Other Wireless Services No interactions have been identified with the following exceptions: Asynchronous Data Service (ADS) G3 AFax cannot be invoked simultaneously with ADS. Call Transfer (CT) G3 AFax does not support CT. Call Waiting (CW) CW is not supported when the existing call is known to be a G3 AFax call. Conference Calling (CC) G3 AFax does not support CC. Do Not Disturb (DND) G3 AFax does not support DND. Emergency Services (9-1-1) None identified, providing the P