SANS 62271-205-2008 High-voltage switchgear and controlgear Part 205 Compact switchgear assemblies for rated voltages above 52 kV《高压开关设备及控制设备 第205部分 额定电压为52千伏以上的紧凑型开关设备组件》.pdf

《SANS 62271-205-2008 High-voltage switchgear and controlgear Part 205 Compact switchgear assemblies for rated voltages above 52 kV《高压开关设备及控制设备 第205部分 额定电压为52千伏以上的紧凑型开关设备组件》.pdf》由会员分享，可在线阅读，更多相关《SANS 62271-205-2008 High-voltage switchgear and controlgear Part 205 Compact switchgear assemblies for rated voltages above 52 kV《高压开关设备及控制设备 第205部分 额定电压为52千伏以上的紧凑型开关设备组件》.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21146-2 SANS 62271-205:2008 Edition 1 IEC 62271-205:2008 Edition 1SOUTH AFRICAN NATIONAL STANDARD High-voltage switchgear and controlgear

4、Part 205: Compact switchgear assemblies for rated voltages above 52 kV This national standard is the identical implementation of IEC 62271-205:2008 and is adopted with the permission of the International Electrotechnical Commission. WARNING Can only be used in conjunction with SANS 62271-1. Publishe

5、d by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa This standard may only be used and printed by approved subscription and freemailing clients of the SABS.SANS

6、62271-205:2008 Edition 1 IEC 62271-205:2008 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee StanSA SC 67A, Electricity distribution systems and components Low-voltage switchgear, in accordance with procedures of Standa

7、rds South Africa, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in April 2008. This standard may only be used and printed by approved subscription and freemailing clients of the SABS. IEC 62271-205 Edition 1.0 2008-01 INTERNATIONAL STANDARD NORME INTERNATIONAL

8、E High-voltage switchgear and controlgear Part 205: Compact switchgear assemblies for rated voltages above 52 kV Appareillage haute tension Partie 205: Ensembles dappareillages compacts de tensions assignes suprieures 52 kV INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERN

9、ATIONALE T ICS 29.130.10; 29.130.99 PRICE CODE CODE PRIX ISBN 2-8318-9511-1SANS 62271-205:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS. 2 62271-205 IEC:2008 CONTENTS FOREWORD.4 1 General 6 1.1 Scope6 1.2 Normative references 7 2 Normal a

10、nd special service conditions8 3 Terms and definitions .8 3.1 General terms .8 3.2 Compact switchgear assembly 9 4 Rating 9 4.1 Rated voltage (U r ) .9 4.2 Rated insulation level 10 4.3 Rated frequency (f r ).10 4.4 Rated normal current (I r ) and temperature rise 10 4.5 Rated short-time withstand c

11、urrent (I k ) 10 4.6 Rated peak withstand current (I p ) 10 4.7 Rated duration of short circuit (t k )10 4.8 Rated supply voltage of closing and opening devices and of auxiliary and control circuits (U a )10 4.9 Rated supply frequency of closing and opening devices and of auxiliary circuits 10 5 Des

12、ign and construction .11 5.3 Earthing of switchgear and controlgear.11 5.101 Earthing of compact switchgear assemblies and their controlgear.11 5.102 Pressure relief devices .11 5.10 Nameplates 11 5.12 Position indication 11 5.103 Locking devices for maintenance operation 11 5.104 Movement of pressu

13、rized devices.12 5.105 Isolating distance for maintenance12 6 Type tests 12 6.1 General 12 6.2 Dielectric tests13 6.3 Radio interference voltage (r.i.v.) test.13 6.4 Measurement of the resistance of circuits.14 6.5 Temperature-rise tests14 6.6 Short-time withstand current and peak withstand current

14、tests14 6.101 Mechanical and environmental tests .15 7 Routine tests 17 7.1 Dielectric test on the main circuit 17 7.2 Tests on auxiliary and control circuits .17 7.3 Measurement of the resistance of the main circuit 17 7.101 Functional tests on auxiliary and control circuits .17 8 Guide to the sele

15、ction of switchgear and controlgear17 8.101 Guide to the selection of compact switchgear assemblies.17 9 Information to be given with enquiries, tenders and orders .18 SANS 62271-205:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.62271-205

16、 IEC:2008 3 10 Transport, storage, installation, operation and maintenance .18 10.1 Conditions during transport, storage and installation .18 10.2 Installation 18 10.3 Operation 18 10.4 Maintenance18 11 Safety.18 Annex AA (informative) Explanations of compact switchgear assemblies .19 Bibliography23

17、 Figure AA.1 Example for type 1 .21 Figure AA.2 Example for type 2 .21 Figure AA.3 Example for type 3 .22 Figure AA.4 Example for type 3 .22 Table 101 Type tests on the compact switchgear assembly .12 SANS 62271-205:2008This standard may only be used and printed by approved subscription and freemail

18、ing clients of the SABS. 4 62271-205 IEC:2008 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 205: Compact switchgear assemblies for rated voltages above 52 kV FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for sta

19、ndardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes I

20、nternational Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may partici

21、pate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement betw

22、een the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publicatio

23、ns have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for an

24、y misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding

25、 national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest ed

26、ition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether d

27、irect or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispe

28、nsable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62271-20

29、5 has been prepared by subcommittee 17C: High-voltage switchgear and controlgear assemblies, of IEC technical committee 17: Switchgear and controlgear. This standard should be read in conjunction with IEC 62271-1, first edition, to which it refers and which is applicable, unless otherwise specified.

30、 In order to simplify the indication of corresponding requirements, the same numbering of clauses and subclauses is used as in IEC 62771-1. Amendments to these clauses and subclauses are given under the same numbering, whilst additional subclauses are numbered from 101. SANS 62271-205:2008This stand

31、ard may only be used and printed by approved subscription and freemailing clients of the SABS.62271-205 IEC:2008 5 The text of this standard is based on the following documents: FDIS Report on voting 17C/418/FDIS 17C/423/RVD Full information on the voting for the approval of this standard can be fou

32、nd in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all the parts in the IEC 62271 series, under the general title High-voltage switchgear and controlgear, can be found on the IEC website. The committ

33、ee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revise

34、d edition, or amended. SANS 62271-205:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS. 6 62271-205 IEC:2008 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 205: Compact switchgear assemblies for rated voltages above 52 kV 1 General 1.1 Scope T

35、his part of IEC 62271 applies to compact switchgear assemblies consisting of at least one switching device directly connected to, or sharing components with, one or more other devices such that there is an interaction between the functions of the individual devices. Such assemblies are made up of de

36、vices defined in 1.101 and are designed, tested and supplied for use as a single unit. The interaction between devices may be due to proximity, sharing of components or a combination of both. The assemblies may contain components of air insulated switchgear (AIS) only or a combination of AIS and gas

37、 insulated switchgear (GIS), so called mixed technology switchgear (MTS) and may be delivered entirely prefabricated or partially assembled. It is not possible to define all potential arrangements of compact switchgear assemblies however four examples are shown for information in Annex A. These comp

38、act switchgear assemblies are for indoor and/or outdoor installations in systems having rated voltages above 52 kV and service frequencies of 50 Hz and 60 Hz. This standard covers the influence on performance of the interactions between devices within compact switchgear assemblies and defines rating

39、s and test procedures for these assemblies. IEC 62271-1 is applicable if not stated otherwise. This standard does not apply to switchgear assemblies consisting solely of GIS which are covered by 62271-203. 1.101 Objective The objective of this standard is to respond to the increasing use of compact

40、switchgear assemblies that perform the functions of a number of separate devices and their controlgear. Numerous arrangements are possible and this standard provides guidance on basic types of assemblies which might be envisaged. As there are potential interactions between devices within such assemb

41、lies, it is necessary to consider the standardization requirements for the assembly in its entirety. The devices, defined by IEC standards, which may form part of a compact switchgear assembly are listed below: SANS 62271-205:2008This standard may only be used and printed by approved subscription an

42、d freemailing clients of the SABS.62271-205 IEC:2008 7 Switching devices: Circuit-breakers IEC 62271-100 Disconnectors/Earthing switches IEC 62271-102 Switches IEC 60265-2 Disconnecting circuit-breakers IEC 62271-108 Devices: Instrument transformers Current transformers IEC 60044-1, IEC 60044-8 Volt

43、age transformers IEC 60044-2, IEC 60044-5, IEC 60044-7 Combined transformers IEC 60044-3 Surge arresters IEC 60099-4 Bushings IEC 60137 Insulators IEC 61462, IEC 62155 Cable connections IEC 62271-209 Transformer connections IEC 61639 Each switching device, device and their controlgear forming part o

44、f a compact switchgear assembly shall comply with the relevant individual standard. If part of the compact switchgear assembly is formed by metal enclosed switchgear devices the requirements of IEC 62271-203 apply. Compact switchgear assemblies, as defined in this standard, are considered to be a si

45、ngle product with a single serial number and one set of documentation. 1.2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the reference

46、d document (including any amendments) applies. IEC 60044-1, Instrument transformers Part 1: Current transformers IEC 60044-2, Instrument transformers Part 2: Inductive voltage transformers IEC 60044-3, Instrument transformers Part 3: Combined transformers IEC 60044-5, Instrument transformers Part 5:

47、 Capacitor voltage transformers IEC 60044-7, Instrument transformers Part 7: Electronic voltage transformers IEC 60044-8, Instrument transformers Part 8: Electronic current transformers IEC 60050-441, International Electrotechnical Vocabulary Chapter 441: Switchgear, controlgear and fuses IEC 60099-

48、4, Surge arresters Part 4: Metal-oxide surge arresters without gaps for a.c. systems IEC 60137, Insulated bushings for alternating voltages above 1 000 V SANS 62271-205:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS. 8 62271-205 IEC:2008 I

49、EC 60265-2, High-voltage switches Part 2: High-voltage switches for rated voltages of 52 kV and above IEC 62271-209, High-voltage switchgear and controlgear Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV Fluid-filled and extruded insulation cables Fluid-filled and dry-type cable-terminations IEC 61462, Composite hollow insulators Pressurized and unpressurized insulators for use in electrica