SANS 60335-2-98-2010 Household and similar electrical appliances - Safety Part 2-98 Particular requirements for humidifiers《家用和类似用途电器的安全 第2-98部分：加湿器专门要求》.pdf

《SANS 60335-2-98-2010 Household and similar electrical appliances - Safety Part 2-98 Particular requirements for humidifiers《家用和类似用途电器的安全 第2-98部分：加湿器专门要求》.pdf》由会员分享，可在线阅读，更多相关《SANS 60335-2-98-2010 Household and similar electrical appliances - Safety Part 2-98 Particular requirements for humidifiers《家用和类似用途电器的安全 第2-98部分：加湿器专门要求》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-23228-3 SANS 60335-2-98:2010Edition 2.2IEC 60335-2-98:2008Edition 2.2 SOUTH AFRICAN NATIONAL STANDARD Household and similar electrical app

4、liances Safety Part 2-98: Particular requirements for humidifiers This national standard is the identical implementation of IEC 60335-2-98:2008 and is adopted with the permission of the International Electrotechnical Commission. WARNING Can only be used in conjunction with SANS 60335-1. Published by

5、 SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS SANS 60335-2-98:2010 Edition 2.2 IEC 60335-2-98:2008 Edition 2.2 Table of changes Change No. Date Scope IEC amdt 1 2004 Amended to indicate that the stand

6、ard does not apply to appliances for heating liquids, to change a note concerning electrode-type appliances into a requirement and to delete a construction requirement. IEC amdt 2 2008 Amended to add to the introduction, to change a cautionary statement regarding the use of humidifiers by challenged

7、 persons and children, to change requirements for marking and instructions, and to add referenced standards to the bibliography. National foreword This South African standard was approved by National Committee SABS TC 72, Safety of electrical appliances and electronic equipment, in accordance with p

8、rocedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document, by reference, forms part of the Compulsory specification for electrical and electronic apparatus, as published by Government Notice No. R. 89 (Government Gazette 31844) of 6 February 20

9、09. This SANS document was published in February 2010. This SANS document supersedes SANS 60335-2-98:2005 (edition 2.1). IEC 60335-2-98Edition 2.2 2008-09INTERNATIONAL STANDARD NORME INTERNATIONALEHousehold and similar electrical appliances Safety Part 2-98: Particular requirements for humidifiers A

10、ppareils lectrodomestiques et analogues Scurit Partie 2-98: Rgles particulires pour les humidificateurs INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE CCICS 97.030 PRICE CODECODE PRIXISBN 2-8318-9949-4 Registered trademark of the International Electrotechnical C

11、ommission Marque dpose de la Commission Electrotechnique Internationale SANS 60335-2-98:2010This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 2 60335-2-98 IEC:2002+A1:2004 +A2:2008 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative refer

12、ences .6 3 Definitions 7 4 General requirements.7 5 General conditions for the tests 7 6 Classification7 7 Marking and instructions.7 8 Protection against access to live parts8 9 Starting of motor-operated appliances 8 10 Power input and current .8 11 Heating 9 12 Void .9 13 Leakage current and elec

13、tric strength at operating temperature9 14 Transient overvoltages .9 15 Moisture resistance 10 16 Leakage current and electric strength.10 17 Overload protection of transformers and associated circuits .10 18 Endurance10 19 Abnormal operation 10 20 Stability and mechanical hazards .10 21 Mechanical

14、strength .11 22 Construction.11 23 Internal wiring.11 24 Components .12 25 Supply connection and external flexible cords 12 26 Terminals for external conductors.12 27 Provision for earthing .12 28 Screws and connections.12 29 Clearances, creepage distances and solid insulation 12 30 Resistance to he

15、at and fire.12 31 Resistance to rusting12 32 Radiation, toxicity and similar hazards12 Annexes .13 Bibliography13 SANS 60335-2-98:2010This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60335-2-98 IEC:2002+A1:2004 3 +A2:2008 INTERNATIONAL ELECTRO

16、TECHNICAL COMMISSION _ HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-98: Particular requirements for humidifiers FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC Nation

17、al Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicl

18、y Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmen

19、tal organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on te

20、chnical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by

21、 IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uni

22、formity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5

23、) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directo

24、rs, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising o

25、ut of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn

26、 to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. This part of International Standard IEC 60335 has been prepared by IEC technical committee 61: Safety of househo

27、ld and similar electrical appliances. This consolidated version of IEC 60335-2-98 consists of the second edition (2002) documents 61/2231/FDIS and 61/2306/RVD, its amendment 1 (2004) documents 61/2746/FDIS and 61/2797/RVD and its amendment 2 (2008) documents 61/3645/FDIS and 61/3685/RVD. The technic

28、al content is therefore identical to the base edition and its amendments and has been prepared for user convenience. It bears the edition number 2.2. A vertical line in the margin shows where the base publication has been modified by amendments 1 and 2. The French version of this standard has not be

29、en voted upon. SANS 60335-2-98:2010This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 4 60335-2-98 IEC:2002+A1:2004 +A2:2008 This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established

30、on the basis of the fourth edition (2001) of that standard. NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1. This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to convert that publication into the IEC standard: Safety requirements for ele

31、ctric humidifiers. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly. NOTE 2 The following numbering sy

32、stem is used: subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered

33、AA, BB, etc. NOTE 3 The following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. Th

34、e following differences exist in the countries indicated below. Clause 1: Electrode-type appliances and appliances with bare-heating elements are only allowed if they are for permanent connection to fixed wiring (Netherlands). 7.12.1: The minimum rated pressure is 1,0 MPa (Denmark, Sweden and Norway

35、). 24.101: The requirement is not applicable (USA). The committee has decided that the contents of the base publication and its amendments will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publicati

36、on. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended

37、or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of the amendment 2 be adopted for implementation nationally not earlier than 12 months

38、or later than 36 months from the date of publication. 2 SANS 60335-2-98:2010This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60335-2-98 IEC:2002+A1:2004 5 +A2:2008 INTRODUCTION It has been assumed in the drafting of this International Standard

39、 that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use ta

40、king into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This standard takes into account the requirements of IEC 60364 as far a

41、s possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant

42、part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. When a part 2 standard does not include additional requirements to cover hazards dealt with in Part 1, Part 1 applies. NOTE 1 This means that the t

43、echnical committees responsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requirements. This standard is a product family standard dealing with the safety of appliances and takes prece

44、dence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For example

45、, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards. An appliance that complies with the text of this standard will not necessarily be considered to comply wit

46、h the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard

47、may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. 2 SANS 60335-2-98:2010This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 6 60335

48、-2-98 IEC:2002+A1:2004 +A2:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-98: Particular requirements for humidifiers 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric humidifiers for household and similar use, t

49、heir rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. NOTE 101 Examples of appliances that are within the scope of the standard are appliances that atomize water; appliances that evaporate water by heating; appliances that blow air through a moist element. Appliances that are not intended for normal household use, but that nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in