SANS 300636-2005 Fixed Radio Systems Point-to-multipoint equipment Time Division Multiple Access (TDMA) Point-to-multipoint digital radio systems in frequency bands in the range 1 .pdf

《SANS 300636-2005 Fixed Radio Systems Point-to-multipoint equipment Time Division Multiple Access (TDMA) Point-to-multipoint digital radio systems in frequency bands in the range 1 .pdf》由会员分享，可在线阅读，更多相关《SANS 300636-2005 Fixed Radio Systems Point-to-multipoint equipment Time Division Multiple Access (TDMA) Point-to-multipoint digital radio systems in frequency bands in the range 1 .pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ICS 33.060.30 ISBN 0-626-17412-0 SANS 300636:2005Edition 1ETSI EN 300636:2001Edition V1.3.1SOUTH AFRICAN NATIONAL STANDARD Fixed Radio Systems; Point-to-

4、multipoint equipment; Time Division Multiple Access (TDMA); Point-to-multipoint digital radio systems in frequency bands in the range 1 GHz to 3 GHz This national standard is the identical implementation of ETSI EN 300636:2001 and is adopted with the permission of the European Telecommunications Sta

5、ndards Institute. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 300636:2005 Edition 1 ETSI EN 300636:2001 Edition V1.3.1 Table of changes Chan

6、ge No. Date Scope Abstract Covers the following Point-to-Multipoint (P-MP) applications: voice; telex; low speed data (up to 64 kbit/s, and Integrated Services Digital Network (ISDN) (basic rate access), operating in the 1,5 GHz, 2,2 GHz, 2,4 GHz and 2,6 GHz bands. Keywords multipoint, radio, RLL, T

7、DMA, transmission. National foreword This South African standard was approved by National Committee StanSA TC 74, Communication technology, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. In South Africa, spectrum band plans are regulated

8、 by the Independent Communications Authority of South Africa (ICASA). The South African Table of Frequency Allocations is obligatory for South Africa and will override any reference to frequency ranges as mentioned in this standard. ETS l EN 300 636 VI .3. I (2001 -02) European Standard (Telecommuni

9、cations series) Fixed Radio Systems; Point-to-multipoint equipment; Time Division Multiple Access (TDMA); Point-to-multipoint digital radio systems in frequency bands in the range 1 GHz to 3 GHz ETSl EN 300 636 V1.3.1 (2001-02) Reference RENTTM-04111-17 Keywords TDMA, multipoint, transmission, radio

10、, RLL 650 Route des Lucioles F-06921 Sohia Antiolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association a but non lucratif enregistree a la Sous-Prefecture de Grasse (06) No 7803188 Imortant notice Individual copies of the present document

11、 can be downloaded from: htt:!www.etsi.orq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, t

12、he reference shall be the printing on ETSl printers of the PDF version kept on a specific network drive within ETSl Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSl do

13、cuments is available at htla:/www.etsi.orq/tb!staius/ If you find errors in the present document, send your comment to: editoretsi.fr Covriaht Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all

14、media O European Telecommunications Standards Institute 2001 All rights reserved. 3 ETSl EN 300 636 V1.3.1 (2001-02) Contents Intellectual Property Rights 4 Foreword 4 Introduction 4 1 Scope 6 1.1 Applications 6 . 1.2 Frequencies 6 1.3 Access method 6 2 References 6 3 Symbols and abbreviations 7 3.1

15、 Symbols 7 3.2 Abbreviations 8 General system architecture 8 Sub-system types . 9 System characteristics 9 . System capacity 9 Transmission error performance . 9 Round trip delay 9 . Transparency 9 Telecommunications Management Network (TMN) interface . 9 5 Radio characteristics . 10 5.1 Frequency b

16、ands 10 5.2 Channel arrangement . 10 . 5.3 Transmitter characteristics 10 . 5.3.1 TX power range 10 5.3.2 Spectrum mask 11 5.3.2.1 Spectrum density mask 11 5.3.2.2 Discrete CW lines exceeding the spectrum mask limit . 13 . 5.3.3 Transmitter spurious emissions 13 5.3.4 RF tolerance 13 5.4 Receiver ch

17、aracteristics . 14 5.4.1 Input level range 14 5.4.2 Spurious emissions . 14 5.4.3 BER performance 14 5.4.4 Interference sensitivity . 14 5.4.4.1 Adjacent channel rejection 14 5.4.4.2 Co-channel re-jection . 14 5.4.5 Image frequency rejection 15 5.5 RF equipment port . I5 . 5.5.1 RF interface 15 . 5.

18、5.2 Return loss 15 6 Types of services/subscriber and exchange interfaces 15 7 Power supply and environmental characteristics . 16 7.1 Power supply . 16 7.2 Environmental conditions 16 7.2.1 Equipment within weather protected locations 16 7.2.2 Equipment for non-weather protected locations 16 . 7.3

19、Electromagnetic compatibility conditions 16 7.4 FeederlAntenna requirements 16 . History 17 ETSl 4 ETSl EN 300 636 V1.3.1 (2001-02) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essenti

20、al IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “lrztellectual Propertl) Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“. which is available from the ETSI Secretariat. Latest updates

21、 are available on the ETSI Web server (hltp:/wwu.etsi.org/ips). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web serve

22、r) which are. or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Transmission and Multiplexing (TM). The former title of the present document was: “Transmission and Multiplexing (TM);

23、Time Division Multiple Access (TDMA) point-to-multipoint digital radio systems in the frequency range 1 to 3 GHz“. Date of latest announcement of this EN (doa): 31 May 2001 Date of latest publication of new National Standard or endorsement of this EN (dople): 30 November 2001 30 November 2001 Introd

24、uction The main field of application of Point-to-Multipoint (P-MP) systems is to provide access to both the Public Switched Telephone Network (PSTN) and private networks (Private Digital Network (PDN), particularly for remote subscribers. By means of P-MP systems the network service area may be exte

25、nded to cover both distant and scattered subscriber locations. These remote subscribers. in a similar manner to the city subscriber. are offered the full range of services by the particular public or private network. Subscribers have access to these services by means of the various standardized user

26、 network interfaces (2-wire loop, data, .). P-MP applications in the metropolitan and urban environment are mainly for the provision of new data services for business subscribers and for the extension of Integrated Services Digital Network (ISDN) services to local subscribers The frequency bands bel

27、ow 3 GHz are particularly suitable for the extension of telecommunications services to distant rural and suburban subscribers. P-MP systems provide standard network interfaces and transparently connect subscribers to the appropriate network node (local switch, .). These systems allow a service to be

28、 connected to a number of subscribers ranging from a few users to several hundred and over a wide range of distances. P-MP systems are generally, but not necessarily. configured as pre-assigned systems or as Demand Assigned Multiple Access (DAMA) radio systems. The essential features of a typical P-

29、MP DAMA radio systems are: - efficient use of the radio spectrum; - concentration; - transparency. Radio is often the ideal way of obtaining communications at low cost and almost independent of distance and difficult topology. Moreover, only a small number of sites are required for these installatio

30、ns, thus facilitating rapid implementation and minimizing maintenance requirements of the systems. Concentration means that N subscribers can share n channels (N being larger than n), allowing better use to be made of the available frequency spectrum and at a lower equipment cost. The term “multi-ac

31、cess“ is derived from the fact that every subscriber has access to every channel (instead of a fixed assignment as in most multiplex systems). When a call is initiated one of the available channels is allocated to it. When the call is terminated, the channel is released for another call. Concentrati

32、on requires the use of distributed intelligent control which in turn allows many other operation and maintenance functions to be added. Transparency means that the exchange and the telephone communicate with each other without being aware of the radio link. 6 ETSl EN 300 636 V1.3.1 (2001-02) 1 Scope

33、 1 .I Applications The scope of the present document covers the following Point-to-Multipoint (P-MP) applications: - voice; - telex; - low speed data (up to 64 kbitls); - Integrated Services Digital Network (ISDN) (basic rate access). Frequencies The present document covers fixed P-MP services opera

34、ting in the 1,5 GHz, 2,2 GHz, 2,4 GHz and 2.6 GHz bands and having the frequency plans as given in CEPT Recommendation T/R 13-01 I for 1,5 GHz, 2,2 GHz and 2,6 GHz bands. For the 2,4 GHz band, the ITU-R Recommendation F.701-2 2 is applicable. 1.3 Access method The present document covers Time Divisi

35、on Multiple Access (TDMA) systems. References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication. edition number, version number, etc.) or non-specific. e F

36、or a specific reference, subsequent revisions do not apply. For a non-specific reference, subsequent revisions do apply. I CEPT Recommendation TIR 13-01: “Preferred channel arrangements for fixed services in the range 1 to 3 GHz“. PI ITU-R Recommendation F.701-2 (1990): “Radio-frequency channel arra

37、ngements for analogue and digital point-to-multipoint radio systems operating in frequency bands in the range 1 350 to 2 690 GHz (1.5, 1,8, 2,0, 2,2, 2,4 and 2,6 GHz)“. 31 ITU-T Recommendation G.821 (1990): “Error performance of an international digital connection operating at a bit rate below the p

38、rimary rate and forming part of an integrated services digital network“. 141 ITU-T Recommendation G.773 (1990): “Protocol suites for Q-interfaces for management of transmission systems“. j ETSI EN 300 631: “Fixed Radio Systems; Point-to-Point Antennas; Antennas for Point-to-Point fixed radio systems

39、 in the 1 GHz to 3 GHz band“. 161 ITU-T Recommendation G.712 (1993): “Transmission performance characteristics of pulse code modulation channels“. 71 ITU-T Recommendation R.20 (1 988): “Telegraph modem for subscriber lines“ 7 ETSl EN 300 636 V1.3.1 (2001-02) ITU-T Recommendation G.703 (1991): “Physi

40、cal/electrical characteristics of hierarchical digital interfaces“. ETSI ETS 300 012: “Integrated Services Digital Network (ISDN); Basic user-network interface; Layer 1 specification and test principles“. ETSI ETS 300 324 (Parts 1 to 5 and Part 7): “V interfaces at the digital Local Exchange (LE); V

41、5.1 interface for the support of Access Network (AN)“. ETSI EN 300 347 (Parts 1 and 2): “V interfaces at the digital Local Exchange (LE); V5.2 interface for the support of Access Network (AN)“. ETSI ETS 300 13 (Parts 1 and 2): “Equipment Engineering (EE); Power supply interface at the input to telec

42、ommunications equipment“. ETSI ETS 300 019 (Parts 1 and 2): “Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Parts 1-0 to 1-7: Classification of environmental conditions. Parts 2-0 to 2-7: Specification of environmental tests“. I41 ETSI

43、EN 300 385 (V1.2.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for fixed radio links and ancillary equipment“. I51 CEPTJERC Recommendation 74-01 : “Spurious emissions“. Symbols and abbreviations Symbols For the purposes of the prese

44、nt document, the following symbols apply: dB dBm GHz Hz kbit/s kHz Mbitts MHz ms decibel decibel relative to 1 milliwatt GigaHertz Hertz kilobits per second kiloHertz Megabits per second MegaHertz millisecond ETSl EN 300 636 V1.3.1 (2001-02) 3.2 Abbreviations For the purposes of the present document

45、, the following abbreviations apply: BER CCS CRS CS CSmin DAMA EMC ISDN PDN P-MP PRBS PSTN RS Rx TDMA TMN TS Tx Bit Error Rate Central Controller Station Central Radio Station Central Station minimum practical Channel Separation (for a given radio-frequency channel arrangement) Demand Assigned Multi

46、ple Access Electromagnetic Compatibility Integrated Services Digital Network Private Digital Network Point-to-Multipoint Pseudo-Random Binary Sequence Public Switched Telephone Network Repeater Station Receiver Time Division Multiple Access Telecommunications Management Network Terminal Station Tran

47、smitter 4 General system architecture A system could consist of physical sub-systems as follows (see figure 1): CCS CRS “? .:;? TS ,. . i yl 1 ! ,- i. . , “, - - /-. ,. .I. 5: .,“ Exchange -. .i ! ! - - - - - A:- ! ! .% FI ;: ,- CS TS RS r:, -. .- :a - TS NOTE: Abbreviations used in figure 1 are des

48、cribed in clause 4.1. Figure 1 : General system architecture ETSl 4.1 Sub-system types CS: Central Station which can be subdivided into two units: - the exchange unit, also called Central Controller Station (CCS) - (interface to the local switch); and - the radio unit, also called Central Radio Stat

49、ion (CRS) - (central basebandlradio transceiver). TS: Terminal station (outstations with subscriber interfaces). RS: Repeater Station (radio repeater outstations with or without subscriber interfaces). The central station performs the interconnection with the local switching exchange, carrying out a concentration function by sharing the total number of available channels in the system. The central station is linked to all remote stations (Repeater Stations (RS) or Terminal Stations (TS) by microwave transmission paths. Whenever an existing digit