SANS 1653-2008 Automotive carpeting《机动车用地毯》.pdf
《SANS 1653-2008 Automotive carpeting《机动车用地毯》.pdf》由会员分享,可在线阅读,更多相关《SANS 1653-2008 Automotive carpeting《机动车用地毯》.pdf(17页珍藏版)》请在麦多课文档分享上搜索。
1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22205-5 SANS 1653:2008Edition 1.3SOUTH AFRICAN NATIONAL STANDARD Automotive carpeting Published by SABS Standards Division 1 Dr Lategan Ro
4、ad Groenkloof Private Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS SANS 1653:2008 Edition 1.3 Table of changes Change No. Date Scope Coll. amdt 1 1999 Amended to replace references to SABS methods, which have been withdrawn and superseded, with references to SA
5、BS ISO methods. The SABS ISO methods cover colourfastness and quantitative textile fibre analysis. Amdt 1 2004 Amended to update the definition of “acceptable“, to change the test methods for breaking strength and colour fastness to rubbing, to delete annex D and to insert the bibliography as a sepa
6、rate item. Amdt 2 2008 Amended to update referenced standards. Foreword This South African standard was approved by National Committee SABS SC 1004M, Textiles Automotive, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This document
7、was published in October 2008. This document supersedes SANS 1653:2004 (edition 1.2). A vertical line in the margin shows where the text has been technically modified by amendment No. 2. Annex A forms an integral part of this document. Annexes B and C are for information only. SANS 1653:2008 Edition
8、 1.3 1 Contents Page Foreword 1 Scope 3 2 Normative references 3 3 Definition 4 4 Requirements 4 5 Inspection and methods of test . 7 5.1 Inspection 7 5.2 Preparation of test specimens 7 5.3 Colour match. 7 5.4 Breaking strength 7 5.5 Tearing strength 8 5.6 Resistance to pile withdrawal (tufted carp
9、eting only) . 8 5.7 Dimensional stability . 8 5.8 Odour rating 9 5.9 Colourfastness to rubbing. 10 5.10 Colourfastness to distilled water. 10 5.11 Colourfastness to cleaning agents 10 5.12 Fogging characteristics. 10 5.13 Fluffing 10 5.14 Colourfastness to light 11 5.15 Resistance to wear . 11 5.16
10、Flammability 11 5.17 Static electricity propensity . 11 6 Packing, labelling and marking 11 Annex A (normative) Notes to purchasers . 13 Annex B (informative) Quality verification of automotive carpeting 13 Annex C (informative) Recommended test methods . 14 Annex D Deleted by amendment No. 1 14 Amd
11、t 1Bibliography. 14 SANS 1653:2008 Edition 1.3 2 This page is intentionally left blank SANS 1653:2008 Edition 1.3 3 Automotive carpeting 1 Scope This standard specifies the requirements for tufted and needle-punched carpeting for use on interior floors and luggage compartment floors and on parcel sh
12、elves, trim panels and side liner panels in the luggage compartments of motor vehicles. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this standard. All standards are subject to revision and, since any reference to a
13、 standard is deemed to be a reference to the latest edition of that standard, parties to agreements based on this standard are encouraged to take steps to ensure the use of the most recent editions of the standards indicated below. Information on currently valid national and international standards
14、can be obtained from the SABS Standards Division. ASTM D3884, Standard test method for abrasion resistance of textile fabrics (rotary platform, double-head method). DIN 54345-2, Testing of textiles; electrostatic behaviour Part 2: Determination of the charge of textile floor coverings by walking tes
15、t. Amdt 2 DIN 75201, Determination of the windscreen fogging characteristics of trim materials in motor vehicles. SANS 70, Conditioning of textiles and standard temperate atmosphere for determining their physical and mechanical properties. SANS 82, Width of a textile fabric in a piece or roll. SANS
16、84, Length of fabric in a piece or roll. SANS 105-A02/ISO 105-A02, Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour. Coll. amdt 1 SANS 105-B02/ISO 105-B02, Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp te
17、st. Coll. amdt 1 SANS 105-D02/ISO 105-D02, Textiles Tests for colour fastness Part D02: Colour fastness to rubbing: Organic solvents. Coll. amdt 1 SANS 105-E01/ISO 105-E01, Textiles Tests for colour fastness Part E01: Colour fastness to water. Coll. amdt 1 SANS 1653:2008 Edition 1.3 4 SANS 105-X12/I
18、SO 105-X12, Textiles Tests for colour fastness Part X12: Colour fastness to rubbing. Amdt 1 SANS 1093 (SABS SM 93) Breaking strength and elongation at break (strip method). Amdt 1 SANS 3795/ISO 3795, Road vehicles, and tractors and machinery for agriculture and forestry Determination of burning beha
19、viour of interior materials. SANS 4919/ISO 4919, Carpets Determination of tuft withdrawal force. SANS 5466 (SABS SM 466) Colour fastness of textiles to rubbing. Amdt 1 SANS 5683, Determination of shade depth class. SANS 6009, Abrasion resistance of textile fabrics (Martindale test). SANS 13934-1/ISO
20、 13934-1, Textiles Tensile properties of fabrics Part 1: Determination of maximum force and elongation at maximum force using the strip method. Amdt 1 SANS 13937-4/ISO 13937-4, Textiles Tear properties of fabrics Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test).
21、 Amdt 2 3 Definition For the purposes of this standard, the following definition applies: acceptable acceptable to the authority administering this standard, or to the parties concluding the purchase contract, as relevant Amdt 1 4 Requirements 4.1 General Automotive carpeting shall: a) be of tufted
22、or needle-punched construction, as required (see annex A); b) be made in accordance with sound manufacturing practice; c) be of acceptably uniform make, width, colour(s) and finish; d) in the case of needle-punched carpeting, have an even fibre distribution; e) be free from defects that affect its a
23、ppearance or that can affect its serviceability, or both; f) be delivered in a clean and commercially dry condition; g) if so required (see annex A), be mouldable; and h) be at least equal in quality and appearance to the approved sample (see annex A). SANS 1653:2008 Edition 1.3 5 4.2 Dimensions of
24、rolls 4.2.1 Width The nominal width of the carpeting in a roll shall be as required (see annex A). The actual overall width, determined in accordance with 5.1, shall be at least 98,5 % of the stated nominal width (see 6.2.1(b). 4.2.2 Length The nominal length of the carpeting in a roll shall be as r
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- SANS16532008AUTOMOTIVECARPETING 机动车 用地 PDF
