NAVY MIL-STD-1399-593 PART 2-1978 INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 593 - PART 2 SEWAGE WASTE WATER DISPOSAL FOR SUBMARINES《船舷系统区域593(部分2-潜水艇污水处理)端口标准》.pdf

《NAVY MIL-STD-1399-593 PART 2-1978 INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 593 - PART 2 SEWAGE WASTE WATER DISPOSAL FOR SUBMARINES《船舷系统区域593(部分2-潜水艇污水处理)端口标准》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-STD-1399-593 PART 2-1978 INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 593 - PART 2 SEWAGE WASTE WATER DISPOSAL FOR SUBMARINES《船舷系统区域593(部分2-潜水艇污水处理)端口标准》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-STD-1377 -573 PART 2 17 U 9777711 O031008 O U MIL-STD-1399 (NAVY) SECTION 593 - Part 2 26 July 1978 MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 593 - PART 2 SEWAGE/WASTE WATER DISPOSAL FOR SUBMARINES This Military Standard is approved for use by the Department of the Navy,

2、 and is available for use by all Departments and Agencies of the Department of Defense. 1. GENERAL AND SCOPE 1.1 General. The policies and procedures established by DOD-STD-1399 are mandatory. 1.2 Scope. This section establishes interface requirements for the standard connectors This section and the

3、 basic standard are to be viewed as an integral document. used on submarines for sanitary tank discharge to a receiving facility to ensure compatibility at the interface. 2. REFERENCED DOCUMENTS 2.1 Issues of documents. The following documents, of the issue in effect on date of invitation for bidc o

4、r request for proposal, form a part of this standard to the extent specified herein. SPECIFICATION MILITARY MIL-H-20176 - Hose and Hose Assembly, Rubber, Smooth Bore, Light-Weight Sewage Discharge and Oily Waste Discharge. STANDARD MILITARY MS27019 - Coupling Assembly, Quick Disconnect, Cam-Locking

5、Type. (Copies of specifications, standards, drawings, and publications required by contractors in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer.) 3. REQUIREMENTS 3.1 Requirements. The specific interface constra

6、ints established herein are manda- tory - see section 4 “Requirements“ of DOD-STD-1399. 4. 4.1 sanitary reliable INTERFACE CHARACTERISTICS AND CONSTRAINTS Submarine interface characteristics and constraints. Connections for discharging wastes from a submarine to a receivingacility shall be capable o

7、f quick and operation and be uniform for all Navy submarines as follows: (a) (b) Submarine interface discharge connection shall be 2.5 inch male half cam-lock type quick disconnect coupling in accordance with MS27019. A 2.5 inch sewage discharge hose with a female fitting at the shipboard inter- fac

8、e shall be provided by the receiving facility and shall be in accordance with MIL-H-20176, type I, size 2.5. 5. DEVIATIONS 5.1 Deviations. If it is deemed necessary to deviate from the characteristics and constraints specified herein the proviaions of section 6, *Deviations“ of mD-sTD-i399 shall be

9、complied with. with copies to: Requests for deviations shall be submitted to the Naval Sea CystemsComand (a) ProgrWProject manager. (b) NAVSEC 6159. Review activity: YD Preparing activity: Navy - SH (Project 1990-N017) *U S. GOVERNMENT PRINTING OFFICE: 1878-703122/3532 Licensed by Information Handling Services