NAVISTAR MPAPS S-F-15 101-GS PL-2015 Plain Washers C English Series (Noun Code 9720).pdf
《NAVISTAR MPAPS S-F-15 101-GS PL-2015 Plain Washers C English Series (Noun Code 9720).pdf》由会员分享,可在线阅读,更多相关《NAVISTAR MPAPS S-F-15 101-GS PL-2015 Plain Washers C English Series (Noun Code 9720).pdf(10页珍藏版)》请在麦多课文档分享上搜索。
1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 1 of 10 NAVISTAR, INC. Material, Parts, and Process Specifications
2、(MPAPS) NUMBER: MPAPS S-F-15.101-GS/PL Former Designation: ESP-F-15.101-GS TITLE: Plain Washers English Series (Noun Code 9720) CURRENT REV No.: 1506 DATE: June 2015 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: ESP-F-15.101-GS - August 2006 PRINTED COPIES O
3、F THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health pract
4、ices and to determine the applicability of regulatory limits prior to use. Change Notice: Changed to New MPAPS format; Combined GS, PP, NPP. 1.0 GENERAL: Plain washers covered by this specification are intended for general industrial applications and are the same as described in American National St
5、andard B 18.22.1. 2.0 CONTENTS: 3.0 MATERIAL: Steel (CST) 1010-1020. Stainless steel (SST) - Any 300 series or 400 series stainless steel per MPAPS A-37. Material will be *passivated in accordance with the specification in MPAPS S-A-0.101. Brass (BRS) and Copper (COP) - Standard with manufacturer. 4
6、.0 POLICY FOR SELECTING PARTS FOR NEW DESIGN: Approved parts are so designated to reduce variety of parts and assure maximum availability, interchangeability and cost savings in volume buying. For new design, parts shall be selected from “Approved“ part list only. Material: Steel (CST) Finish: Zinc
7、Trivalent (ZN6A), Plain (PLN) Type: A - Narrow (AN), A - Wide (AW) Sizes: See page 3 FOR DIMENSIONS Page General 1 Material 1 Policy for Selecting Parts for New Design 1 Service Parts Substitution Policy 2 Finishes 2 Restricted Chemical Substances 2 Part Number Selection 2 Quality 2 Conversion List
8、2 Preferred Sizes 3 Non-Preferred Sizes 5 Non-Designated Type 8 Technical Information 10 NUMBER: MPAPS S-F-15.101-GS/PL TITLE: Plain Washers REVISION: 1506 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Supp
9、liers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 2 of 10 5.0 SERVICE PARTS SUBSTITUTION POLICY: In the event that engineering does not indicate a “Do not substitute“ in engineering specifications, the following substitutions may be implemented in service. This
10、 policy is the result of a proposal circulated April 20, 1981, and subsequently approved by engineering departments worldwide. Plain Washers To Be Replaced Service Replacement Plain Finish (PLN) All Types Zinc dichromate finish (ZN6A) all types or phosphate coating (PHC) (if ZND is not set up for se
11、rvice). 6.0 FINISHES: Washers will be furnished plain, plated or coated in accordance with the MPAPS and class listed below: Zinc Dichromate (ZN6A) MPAPS G-20, Class 6A. Nickel Bright (NIB) on brass CEMS G-19, Part III, Class 5 NIB. Phosphate Coating (PHC) MPAPS G-1, Class B-2. Nickel Dull (NID) on
12、steel CEMS G-19, Part III, Class 5 NID. Chrome Bright (CRB) on steel CEMS G-19, Part III, Class 13 CRB Blued (BLU) on steel - Standard with manufacturer. Nickel Bright (NIB) on steel CEMS G-19, Part III, Class 5 NIB. 7.0 RESTRICTED CHEMICAL SUBSTANCES: Effective January 1, 2007, all product supplied
13、 to the requirements of this specification must comply with the requirements of the MPAPS B-50 specification. 8.0 PART NUMBER SELECTION: Plain washer part numbers have been separated into three sections: 1. Type A, Selected Sizes - Preferred, see section 11.0 2. Types A and B - Non-Preferred Sizes,
14、Materials or Finishes, see section 12.0 3. Non-Designated Type - Non-Preferred. see section 13.0 9.0 QUALITY: Washers will be free from burrs, loose scale, sharp edges and all other defects that might affect their serviceability. Washers will be flat within .005 inch for basic outside diameters up t
15、o and including .875 inch and within .010 inch for larger outside diameters. 10.0 CONVERSION LIST: Inside Diameter Outside Diameter Thickness Type-Finish 410SST Part Number Replacement Part Number .156 .375 .036 A-PLN 27305R1 221431 .281 .625 .051 AN-PLN 27308R1 178474 .344 .688 .051 AN-PLN 27309R1
16、28588R1 .406 .812 .051 AN-PLN 27503R1 23402R1 Plain flat washers of 410 stainless steel material removed due to problems in procurement. Replacement washers may be any 300 or 400 series stainless steel per MPAPS A-37. NUMBER: MPAPS S-F-15.101-GS/PL TITLE: Plain Washers REVISION: 1506 This document i
17、s restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 3 of 10 11.0 PREFERRED SIZES: 11.1 Type A TYPE A Dimensions in inches: Nominal Was
18、her Size Series Inside Outside Diameter Diameter Thickness A B C Tolerance Tolerance Nominal Plus Minus Nominal Plus Minus Nominal Max Min * No. 1 .078 .000 .005 .188 .000 .005 .020 .025 .016 * No. 2 .094 .000 .005 .250 .000 .005 .020 .025 .016 * No. 4 .125 .008 .005 .312 .008 .005 .032 .040 .025 No
19、. 6 .156 .008 .005 .375 .015 .005 .049 .065 .036 No. 8 .188 .008 .005 .438 .015 .005 .049 .065 .036 No. 10 .219 .008 .005 .500 .015 .005 .049 .065 .036 * 3/16 .250 .015 .005 .562 .015 .005 .049 .065 .036 * No. 12 .250 .015 .005 .562 .015 .005 .065 .080 .051 1/4 Narrow .281 .015 .005 .625 .015 .005 .
20、065 .080 .051 1/4 Wide .312 .015 .005 .734 .015 .007 .065 .080 .051 5/16 Narrow .344 .015 .005 .688 .015 .007 .065 .080 .051 5/16 Wide .375 .015 .005 .875 .030 .007 .083 .104 .064 3/8 Narrow .406 .015 .005 .812 .015 .007 .065 .080 .051 3/8 Wide .438 .015 .005 1.000 .030 .007 .083 .104 .064 7/16 Narr
21、ow .469 .015 .005 .922 .015 .007 .065 .080 .051 7/16 Wide .500 .015 .005 1.250 .030 .007 .083 .104 .064 1/2 Narrow .531 .015 .005 1.062 .030 .007 .095 .121 .074 1/2 Wide .562 .015 .005 1.375 .030 .007 .109 .132 .086 * 9/16 Narrow .594 .015 .005 1.156 .030 .007 .095 .121 .074 * 9/16 Wide .625 .015 .0
22、05 1.469 .030 .007 .109 .132 .086 5/8 Narrow .656 .030 .007 1.312 .030 .007 .095 .121 .074 5/8 Wide .688 .030 .007 1.750 .030 .007 .134 .160 .108 3/4 Narrow .812 .030 .007 1.469 .030 .007 .134 .160 .108 3/4 Wide .812 .030 .007 2.000 .030 .007 .148 .177 .122 * 7/8 Narrow .938 .030 .007 1.750 .030 .00
23、7 .134 .160 .108 * 7/8 Wide .938 .030 .007 2.250 .030 .007 .165 .192 .136 1 Narrow 1.062 .030 .007 2.000 .030 .007 .134 .160 .108 1 Wide 1.062 .030 .007 2.500 .030 .007 .165 .192 .136 * 1- 1/8 Narrow 1.250 .030 .007 2.250 .030 .007 .134 .160 .108 * 1- 1/8 Wide 1.250 .030 .007 2.750 .030 .007 .165 .1
24、92 .136 1- 1/4 Narrow 1.375 .030 .007 2.500 .030 .007 .165 .192 .136 1- 1/4 Wide 1.375 .030 .007 3.000 .030 .007 .165 .192 .136 * 1- 3/8 Narrow 1.500 .030 .007 2.750 .030 .007 .165 .192 .136 * 1- 3/8 Wide 1.500 .045 .010 3.250 .045 .010 .180 .213 .153 1- 1/2 Narrow 1.625 .030 .007 3.000 .030 .007 .1
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NAVISTARMPAPSSF15101GSPL2015PLAINWASHERSCENGLISHSERIESNOUNCODE9720PDF
链接地址:http://www.mydoc123.com/p-963173.html