NAVISTAR MPAPS D-7110-2014 Encapsulated or Molded Product Badges.pdf
《NAVISTAR MPAPS D-7110-2014 Encapsulated or Molded Product Badges.pdf》由会员分享,可在线阅读,更多相关《NAVISTAR MPAPS D-7110-2014 Encapsulated or Molded Product Badges.pdf(5页珍藏版)》请在麦多课文档分享上搜索。
1、 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2014 by Navistar, Inc. AUGUST 2014 Page 1 of 5 NAVISTAR, INC. Material, Parts, and Process Specification
2、s (MPAPS) NUMBER: MPAPS D-7110 Former Designation: TMS-7110 TITLE: Encapsulated or Molded Product Badges CURRENT REV No.: 1408 DATE: August 2014 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: TMS-7110 - April 2013 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIF
3、IED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the app
4、licability of regulatory limits prior to use. Change Notice: Changed to new MPAPS format; added Type 8; updated reference documents; editorial changes. 1.0 APPLICATION This specification covers four types of graphics, such as the INTERNATIONAL logo or similar product graphics, comprised of a mountin
5、g plate, graphic, and a lens suitable for exterior application. 2.0 SCOPE This specification covers the application and performance requirements of the completed assembly, and general requirements for the individual components. 2.1 Restricted Chemical Substances Effective January 1, 2007, all produc
6、t supplied to the requirements of this specification must comply with the requirements of the MPAPS B-50 specification. 2.2 Description 2.2.1 Type 1 Type 1 is a zinc die cast plate, an aluminum screen-printed graphic, and a poured urethane lens. Note: For existing drawings that specify TMS-7110 or M
7、PAPS D-7110 without referring to Type, Type 1 will be supplied. 2.2.2 Type 2 Type 2 consists of an injection-molded plastic plate with an acrylic second surface printed lens. 2.2.3 Type 3 Type 3 consists of an injection-molded plastic plate with chrome finish and no lens. 2.2.4 Type 4 Type 4 is an i
8、njection-molded plastic plate with painted and/or hot-stamped finish and no lens. 2.2.5 Type 5 Type 5 consists of an injection-molded plastic plate, a metalized layer with a printed PVC layer, and a weather resistant polyurethane coating. 2.2.6 Type 6 Type 6 consists of an injection-molded plastic p
9、late with an aluminum trim appliqu. 2.2.7 Type 7 Type 7 consists of an injection-molded plastic plate with a stainless steel trim appliqu. 2.2.8 Type 8 Type 8 consists of an injection molded plastic plate with a urethane second surface printed lens. NUMBER: MPAPS D-7110 TITLE: Encapsulated or Molded
10、 Product Badges REVISION: 1408 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2014 by Navistar, Inc. AUGUST 2014 Page 2 of 5 3.0 REFERENCE DOCUMENTS Unl
11、ess otherwise specified, the latest issue of all referenced standards shall apply. The following standards, specifications and regulations are referenced in this specification. Quality System Standard ISO 9001 or TS-16949 NAVISTAR MPAPS K-6929 ASTM B 368 NAVISTAR Manufacturing Std. MS-D-13 NAVISTAR
12、TMS-7051 ASTM D 2247 CFR Title 29, Part 1910 NAVISTAR TMS-7085 ASTM D 1002 NAVISTAR CEMS C-14 NAVISTAR TMS-7086 ASTM G 53 NAVISTAR MPAPS D-28 NAVISTAR TMS-9008 SAE J1960 NAVISTAR CEMS DT-4 NAVISTAR TMS-9009 CEMS G-19 NAVISTAR MPAPS B-50 NAVISTAR MPAPS P-9543 MPAPS GT-31 NAVISTAR MPAPS A-37 NAVISTAR
13、MPAPS C-10 ASTM D 5041 NAVISTAR MPAPS DT-12 4.0 REQUIREMENTS 4.1 Individual Components 4.1.1 Mounting Plate 4.1.1.1 Material Type 1 - Zinc base die casting, DZ-96-4-05, as per CEMS C-14 Types 2, 3, 4, 5, OR ABS, A64A65S82YB3600, as per CEMS D-28; or as specified on the Engineering Drawing. 4.1.1.2 F
14、inish 4.1.1.2.1 Type 1 - Chromium Plating, Class MZ, CEMS G-19, Part I, or Paint, Class I, TMS-9009, as specified on the Engineering Drawing 4.1.1.2.2 Types 2, 3, otherwise there is to be no pause between steps. 4.2.5.1.1 Wet Thermal Cycle 1. 30 minutes -30 C in a 50-50 solution ethylene glycol and
15、water 2. 30 minutes 82 C in a solution of 5 percent detergent and 95 percent water NUMBER: MPAPS D-7110 TITLE: Encapsulated or Molded Product Badges REVISION: 1408 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standar
16、ds. Suppliers are required to assume all patent liability. 2014 by Navistar, Inc. AUGUST 2014 Page 4 of 5 4.2.5.2 Required: see 4.2 for requirement 4.2.6 CASS Testing - ASTM B 368 4.2.6.1 Method: Mount parts at a 15-30 degree angle. Test for 22 hours. 4.2.5.2 Required: see 4.2 for requirement 4.2.7
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NAVISTARMPAPSD71102014ENCAPSULATEDORMOLDEDPRODUCTBADGESPDF
链接地址:http://www.mydoc123.com/p-962903.html