FORD SB1-23-A-1992 KEVLAR BLEND GLOVES WITH WRISTLET《带腕套的KEVLAR混合物手套》.pdf

《FORD SB1-23-A-1992 KEVLAR BLEND GLOVES WITH WRISTLET《带腕套的KEVLAR混合物手套》.pdf》由会员分享，可在线阅读，更多相关《FORD SB1-23-A-1992 KEVLAR BLEND GLOVES WITH WRISTLET《带腕套的KEVLAR混合物手套》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、FORD MA“ACTUR1NG STANDARDS SB1-23A MARCH 1992 KEVLAR BLEND GLOVES WITH WRISTLET SB1-23A Page 1 1. USAGE: The Safety Unit must approve this glove prior to usage. The gloves are designed for the handling of metal stampings and various parts which pose above average hazards. 2. WiERUL: This glove to be

2、 knitted of 3 singles with ends as follows: 2.1 One end of 8/1 Kevlar yarn, 100% pure and unblended, shall comprise 34% of the total material content and constitute said material pile, as in the percentage shown. 2.2 One end of 7/1 long staple domestic cotton, four twists per inch, plus or minus 1/2

3、 inch (13mm) minimum, which shall comprise 23% of the total material content, and constitute said material backing. 2.3 One end of 7/1 long staple domestic cotton, four twists per inch, plus or minus 1/2 inch (131m) multiple minimum, which shall comprise 41% of the total material content, and consti

4、tute said material pile as in the percentage shown. Cotton shall be comprised of one white cotton fiber and one brown cotton fiber blended into a single strand. 2.4 Wristlet tubing shall be knitted, rib out, of 10/1 100% long staple cotton in 15 yard per pound weight and shall constitute 2% of the t

5、otal material content. 2.5 Thread - Wristlet - 16/4 SAK quality. 2.6 Long fiber reference in all materials mandates a minimum length of 1-1/2 inches (38mm) per staple fiber. 3. SIZE: The glove shall measure a minimum of 8 inches (203mm) from tip of middle finger to glove body base. The width of the

6、glove shall measure a minimum of 4-3/4 inches (12lnmr) at thumb crotch. Wrist to be double ply, 3 inches (76mm) in the clear, resulting in a glove 11 inches (279mm) overall from tip of middle finger to wristlet base. 4. CONSTRUCTION: These three ends shall be knitted pile out to produce the specific

7、ation glove, seamless and reversible in style with securely sewn knit wristlet. 5. WEIGHT: pair. Gloves shall weigh a minimum of 45 grams or 2.4 pounds per dozen 9009Lb0 0053374 T74 a SB1 * 238 MARCH 1992 KEITLAR BLEND GXDVES WITH WRISTLET SB1 - 23A Page 2 6. RECLAIMING: This glove shall be impemiou

8、s to proper laundering procedures over a prudent recycling span. product is an indication that the glove may be deteriorating. Therefore, patching should be scrutinized. The necessity to patch this 7. COUR CODING: is optional. Color coding of the elastic band at the base of the glove 8. MA“ACTRERS RESPONSIBILITY: All material supplied to this standard must be equivalent in all characteristics to the material upon which approval was originally granted, and shall be satisfactory for the intended application.