FORD FLTM BZ 108-01-2018 10-L BAG METHOD FOR MEASURING VOC EMISSIONS FROM VEHICLE INTERIOR MATERIALS.pdf
《FORD FLTM BZ 108-01-2018 10-L BAG METHOD FOR MEASURING VOC EMISSIONS FROM VEHICLE INTERIOR MATERIALS.pdf》由会员分享,可在线阅读,更多相关《FORD FLTM BZ 108-01-2018 10-L BAG METHOD FOR MEASURING VOC EMISSIONS FROM VEHICLE INTERIOR MATERIALS.pdf(7页珍藏版)》请在麦多课文档分享上搜索。
1、 FORD LABORATORY TEST METHOD BZ 108-01 Date Action Revisions Rev. 02 2018 07 02 Revised See Summary of Revisions T. Guo, AP 2017 12 13 Revised See Summary of Revisions D. Stark, NA 2017 01 23 Released D. Stark, NA Controlled document at www.MATS Copyright 2018, Ford Global Technologies, LLC Page 1 o
2、f 7 10-L BAG METHOD FOR MEASURING VOC EMISSIONS FROM VEHICLE INTERIOR MATERIALS Application Use this procedure as a material-level screening method for the emissions of selected volatile organic compounds (VOCs) and total volatile organic compounds (TVOCs). Apparatus and Materials Required Gas Chrom
3、atograph Mass Spectrometer (GC-MS) Agilent GC 6890 MS 5975B (or equivalent) High Performance Liquid Chromatography (HPLC) Agilent 1100 Shimadzu LC20A, Thermo U-3000 (or equivalent) Thermal Desorption Thermal Desorption System Autosampler (TDSA) Gerstel TDSA2 with a cold injection system (or equivale
4、nt) Thermal Desorption Unit (TDU) Gerstel Twister TDU (or equivalent) with a cold injection system Markes TD-100 (or equivalent) Mechanical convection oven Capable of maintaining a temperature of 100 0.5 C, typical chamber size is 0.4 m3 10-Liter Sampling bag 10-L polyvinyl fluoride (PVF) Tedlar bag
5、 with a sampling valve composed of inert materials (Quick Lock-type fittings composed of inert materials are recommended). Typical bag size is approximately 33 cm x 50 cm or 30 cm x 56 cm. The bag should be capable of being sealed with plastic C-clamp. Any alternative bag material must demonstrate e
6、quivalency. Purchasing thermally pre-cleaned, sealed sampling bag is recommended. Evaluate all bag lots to the background limits prior to use. If the lot does not meet the background criteria, see page 5 for the 10-L Bag Thermal Conditioning Procedure. FORD LABORATORY TEST METHOD BZ 108-01 Controlle
7、d document at www.MATS Copyright 2018, Ford Global Technologies, LLC Page 2 of 7 Suitable suppliers for sampling bags: Dalian Delin Gas Packaging Co., Ltd. 240 Sanyuan St, Xigang District, Dalian, Liaoning, China Tel: 86-0411-83703385 or 86-0411-83671536 Fax: 86-0411-83706065 Sampling Bag Technolog
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- FORDFLTMBZ10801201810LBAGMETHODFORMEASURINGVOCEMISSIONSFROMVEHICLEINTERIORMATERIALSPDF

链接地址:http://www.mydoc123.com/p-747702.html