ETSI TS 151 010-1-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Mobile Station (MS) conformance specification Part 1 Conformance specification (V13 5 0 3GPP TS 5.pdf

《ETSI TS 151 010-1-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Mobile Station (MS) conformance specification Part 1 Conformance specification (V13 5 0 3GPP TS 5.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 151 010-1-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Mobile Station (MS) conformance specification Part 1 Conformance specification (V13 5 0 3GPP TS 5.pdf（137页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 151 010-1 V12.9.0 (2017-04) Digital cellular telecommunications system (Phase 2+) (GSM); Mobile Station (MS) conformance specification; Part 1: Conformance specification (3GPP TS 51.010-1 version 12.9.0 Release 12) TECHNICAL SPECIFICATION GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSRETSI ETSI TS

2、 151 010-1 V12.9.0 (2017-04)13GPP TS 51.010-1 version 12.9.0 Release 12Reference RTS/TSGR-0551010-1vc90 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif e

3、nregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present

4、 document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive

5、 within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the

6、present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as auth

7、orized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PL

8、UGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Associa

9、tion. ETSI ETSI TS 151 010-1 V12.9.0 (2017-04)23GPP TS 51.010-1 version 12.9.0 Release 12Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for

10、ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:

11、/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essenti

12、al to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interprete

13、d as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “

14、will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 151 010-1 V12.9.0 (2017-04)3

15、3GPP TS 51.010-1 version 12.9.0 Release 12Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions, conventions and applicability . 6g34 Void 6g35 Testing methodology in general (layers 1, 2, and 3) 6g36 to 90 Void . 7g3

16、Annex 1 to 10: Void 8g3Annex B (informative): Change history . 9g3History 136g3ETSI ETSI TS 151 010-1 V12.9.0 (2017-04)43GPP TS 51.010-1 version 12.9.0 Release 12Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present docum

17、ent are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where:

18、x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incr

19、emented when editorial only changes have been incorporated in the document. The present document is part 1 of a multi-part deliverable covering the Digital cellular telecommunications system (GSM Phase2 and Phase 2+ Releases 1996, 1997, 1998, 1999, 3GPP Release 4, 3GPP Release 5, 3GPP Release 6, 3GP

20、P Release 7, 3GPP Release 8, 3GPP Release 9, 3GPP Release 10, 3GPP Release 11 and 3GPP Release 12); Mobile Station (MS) conformance specification, as identified below: Part 1: Conformance specification Reference: 3GPP TS 51.010-1. Part 2: Protocol Implementation Conformance Statement (PICS) proforma

21、 specification. Reference: 3GPP TS 51.010-2. Part 3: Layer 3 (L3) Abstract Test Suite (ATS). Reference: 3GPP TS 51.010-3 v6.3.0 (NOTE 1). Part 4: SIM Application Toolkit conformance specification. Reference: 3GPP TS 51.010-4. Part 5: Inter-RAT (GERAN to UTRAN) Abstract Test Suite (ATS) Reference: 3G

22、PP TS 51.010-5. Part 7: Location Services (LCS) test scenarios and assistance data. Reference: 3GPP TS 51.010-7. NOTE 1: GP-25: TTCN is not maintained after v6.3.0, and is henceforward to be considered an example test suite rather than the conformance tests ETSI ETSI TS 151 010-1 V12.9.0 (2017-04)53

23、GPP TS 51.010-1 version 12.9.0 Release 121 Scope The present document describes the technical characteristics and methods of test for Mobile Stations (MS), for the Pan European digital cellular communications system and Personal Communication Systems (PCS) operating in the 400 MHz, 700 MHz, 810 MHz,

24、 850 MHz, 900 MHz, 1 800 MHz and 1 900 MHz band (GSM 450, GSM 480, GSM 710, GSM 750, T-GSM 810, GSM 850, R-GSM 900, ER-GSM 900, GSM 900, DCS 1 800 and PCS 1 900), standardized by ETSI Special Mobile Group (SMG). The present document is valid for MS implemented according to GSM Phase2 or Phase2+ R96,

25、 or R97, or R98, or R99 or 3GPP Release 4 or 3GPP Release 5 or 3GPP Release 6, 3GPP Release 7, 3GPP Release 8, 3GPP Release 9, 3GPP Release 10, 3GPP Release 11 or 3GPP Release 12. A subset of the tests is referenced in the GSM Common Technical Regulations (CTRs) and is used for regulatory conformanc

26、e testing according to the EEC procedures for Telecommunications Terminal Equipment (TTE) type approval (EC Directive 91/263/EEC; also known as the “Terminal Directive“ or “Second Phase Directive“). The remaining tests can be used to verify conformance with the GSM core technical specifications for

27、those requirements that are not considered “essential“ in the sense of the EC Directive 91/263/EEC (Article 4). The present document covers the minimum characteristics considered necessary in order to provide sufficient performance for mobile equipment and to prevent interference to other services o

28、r to other users, and to the PLMNs. It does not necessarily include all the characteristics which may be required by a user or subscriber, nor does it necessarily represent the optimum performance achievable. It applies to the public land mobile radio service in the GSM systems named above, using co

29、nstant envelope modulation and operating on radio frequencies in the frequency bands listed above respectively with a channel separation of 200 kHz and carrying 8 full rate channels or 16 half rate channels per carrier according to the TDMA principle. The present document is part of the GSM-series o

30、f technical specifications. The present document neither replaces any of the other GSM technical specifications or GSM related ETSs or ENs, nor is it created to provide full understanding of (or parts of) GSM systems. The present document lists the requirements, and provides the methods of test for

31、testing a MS for conformance to the GSM standard. For a full description of the system, reference should be made to all the GSM technical specifications or GSM related ETSs or ENs. Clause 2 provides a complete list of the GSM technical specifications, GSM related ETSs, ENs, and ETRs, on which this c

32、onformance test specifications is based. The present document applies to the unit which includes the hardware to establish a connection across the radio interface. If there is a difference between this conformance document, and any other GSM technical specification or GSM related ETS or EN, or 3GPP

33、TS, then the other GSM technical specification or GSM related ETS or EN or 3GPP TS shall prevail. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of public

34、ation and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers

35、to the latest version of that document in the relevant Release. - For a GSM Phase 2+ Release 12 MS, references to GSM documents are to version 12.x.y, when available. - For a GSM Phase 2+ Release 11 MS, references to GSM documents are to version 11.x.y, when available. ETSI ETSI TS 151 010-1 V12.9.0

36、 (2017-04)63GPP TS 51.010-1 version 12.9.0 Release 12- For a GSM Phase 2+ Release 10 MS, references to GSM documents are to version 10.x.y, when available. - For a GSM Phase 2+ Release 9 MS, references to GSM documents are to version 9.x.y, when available. - For a GSM Phase 2+ Release 8 MS, referenc

37、es to GSM documents are to version 8.x.y, when available. - For a GSM Phase 2+ Release 7 MS, references to GSM documents are to version 7.x.y, when available. - For a GSM Phase 2+ Release 6 MS, references to GSM documents are to version 6.x.y, when available. - For a GSM Phase 2+ Release 5 MS, refer

38、ences to GSM documents are to version 5.x.y, when available. - For a GSM Phase 2+ Release 4 MS, references to GSM documents are to version 4.x.y, when available. - For a GSM Phase 2+ Release 1999 MS, references to GSM documents are to version 8.x.y (for 01.-series to 12.-series) or (3.x.y for 21.-se

39、ries to 35.-series), when available. - For a GSM Phase 2+ Release 1998 MS, references to GSM documents are to version 7.x.y, when available. - For a GSM Phase 2+ Release 1997 MS, references to GSM documents are to version 6.x.y, when available. - For a GSM Phase 2+ Release 1996 MS, references to GSM

40、 documents are to version 5.x.y. when available. - For a GSM Phase 2 MS, references to GSM documents are to version 4.x.y. NOTE: References to 3GPP Technical Specifications and Technical Reports throughout the presnt document shall be interpreted according to the Release shown in the formal referenc

41、e in this clause, based upon the Release of the implementation under test. EXAMPLE 1: References for a Ph2 MS shall be interpreted as: 1 3GPP TS 01.04 Ph2 2 3GPP TS 02.02 Ph2 etc. EXAMPLE 2: References for a Rel-4 MS shall be interpreted as: 1 3GPP TS 21.905 Rel-4 2 3GPP TS 22.002 Rel-4 etc. 1 to 15

42、1 (void) 152 3GPP TS 51.010-1 Release 13: “GSM/EDGE Radio Access Network; Digital cellular telecommunications system (Phase 2+); Mobile Station (MS) conformance specification; Part 1: Conformance specification“ 3 Definitions, conventions and applicability Void 4 Void 5 Testing methodology in general

43、 (layers 1, 2, and 3) The requirements of the present document are provided in 3GPP TS 51.010-1 Release 13 152. ETSI ETSI TS 151 010-1 V12.9.0 (2017-04)73GPP TS 51.010-1 version 12.9.0 Release 126 to 90 Void ETSI ETSI TS 151 010-1 V12.9.0 (2017-04)83GPP TS 51.010-1 version 12.9.0 Release 12Annex 1 t

44、o 10: Void ETSI ETSI TS 151 010-1 V12.9.0 (2017-04)93GPP TS 51.010-1 version 12.9.0 Release 12Annex B (informative): Change history TSG # TSG Doc CR Rev Subject/Comment Cat Old New WG Doc Work item 08/2000 Conversion to 3GPP layout and number 11.10-1 v 9.0.1 51.010-1 v 4.0.1 G-02 GP-000489 001 Appli

45、cability of 2 new GPRS tests 20.22.8 and 20.22.9 F 4.0.1 4.1.0 G4-000003 GPRS G-02 GP-000491 002 PIXIT information for SoLSA B 4.0.1 4.1.0 G4-000021 SoLSA G-02 GP-000492 003 Test case 31.3.1.4 Additions to test procedure F 4.0.1 4.1.0 G4-000039 TEI G-02 GP-000492 004 Test case 31.3.1.5 Additions to

46、test procedure. F 4.0.1 4.1.0 G4-000040 TEI G-02 GP-000492 005 TC 31.4.3.1.2 - Alignment of Expected Sequence with the Test Procedure description F 4.0.1 4.1.0 G4-000050 TEI G-02 GP-000492 006 TC 31.4.3.5 Corrections of the Method of test according to the core specification GSM 04.84 F 4.0.1 4.1.0 G

47、4-000051 TEI G-02 GP-000490 007 Introduction of PCS 1900 into section 23 B 4.0.1 4.1.0 G4-000053 PCS1900 G-02 GP-000490 008 Introduction of PCS 1900 into section 26.3 B 4.0.1 4.1.0 G4-000054 PCS1900 G-02 GP-000490 009 Introduction of PCS 1900 into section 26.5 B 4.0.1 4.1.0 G4-000055 PCS1900 G-02 GP

48、-000490 010 Introduction of PCS 1900 into section 26.6 B 4.0.1 4.1.0 G4-000056 PCS1900 G-02 GP-000490 011 Introduction of PCS 1900 into section 26.7 B 4.0.1 4.1.0 G4-000057 PCS1900 G-02 GP-000490 012 Introduction of PCS 1900 into section 26.8 B 4.0.1 4.1.0 G4-000058 PCS1900 G-02 GP-000490 013 Introd

49、uction of PCS 1900 into section 30 B 4.0.1 4.1.0 G4-000059 PCS1900 G-02 GP-000490 014 Introduction of PCS 1900 into section 34 B 4.0.1 4.1.0 G4-000060 PCS1900 G-02 GP-000492 015 Correction for testcase 31.4.3.1.1 D 4.0.1 4.1.0 G4-000070 TEI G-02 GP-000492 016 Correction for testcase 31.4.3.1.2 D 4.0.1 4.1.0 G4-000071 TEI G-02 GP-000492 017 Correction for testcase 31.4.3.1.3 D 4.0.1 4.1.0 G4-000072 TEI G-02 GP-000492 018 Correction for testcase 31.4.3.2 D 4.0.1 4.1.0 G4-000073 TEI G-02 GP-000488 019 Addition of EDGE test cases to the applicability