ETSI EN 302 435-2-2009 Electromagnetic compatibility and Radio spectrum Matters (ERM) Short Range Devices (SRD) Technical characteristics for SRD equipment using Ultra WideBand tec_1.pdf

《ETSI EN 302 435-2-2009 Electromagnetic compatibility and Radio spectrum Matters (ERM) Short Range Devices (SRD) Technical characteristics for SRD equipment using Ultra WideBand tec_1.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 302 435-2-2009 Electromagnetic compatibility and Radio spectrum Matters (ERM) Short Range Devices (SRD) Technical characteristics for SRD equipment using Ultra WideBand tec_1.pdf（13页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 302 435-2 V1.3.1 (2009-12)Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Short Range Devices (SRD);Technical characteristics for SRD equipment usingUltra WideBand technology (UWB);Building Material Analysis and Classifi

2、cation equipment applicationsoperating in the frequency band from 2,2 GHz to 8,5 GHz;Part 2: Harmonized EN covering the essential requirementsof article 3.2 of the R Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat

3、. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the u

4、pdates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present docu

5、ment is part 2 of a multi-part deliverable covering Ultra WideBand (UWB) Building Material Analysis (BMA) and Classification equipment applications operating in the frequency band from 2,2 GHz to 8 GHz, as identified below: Part 1: “Technical characteristics and test methods“; Part 2: “Harmonized EN

6、 covering the essential requirements of article 3.2 of the R equipment fitted with an integral antenna; handheld devices. The present document does not apply to: UWB communication devices; Ground penetrating radar devices; nor Through-wall radar imaging devices; as defined in ITU-R Recommendation SM

7、.1754 i.3. The present document specifies the equipment which is designed to not radiate into the free space. It is designed to function only when positioned such that it radiates directly into the absorptive material such as walls and other building materials which absorb emissions. The present doc

8、ument does not necessarily include all the characteristics which may be required by a user, nor does it necessarily represent the optimum performance achievable. The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC i.2 (R - for informative references. Refere

9、nced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references Th

10、e following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 ETSI EN 302 435-1 (V1.3.1): “Electrom

11、agnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra WideBand technology (UWB); Building Material Analysis and Classification equipment applications operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 1:

12、Technical characteristics and test methods“. 2 Commission Decision 2007/131/EC of 21 February 2007 on allowing the use of the radio spectrum for equipment using ultra-wideband technology in a harmonized manner in the Community (notified under document number C(2007) 522) (Text with EEA relevance). 3

13、 ECC/DEC/(07)01: “ECC Decision of 30 March 2007 on specific Material Sensing devices using Ultra-Wideband (UWB) technology“ (amended 26 June 2009). 2.2 Informative references The following referenced documents are not essential to the use of the ETSI deliverable but they assist the user with regard

14、to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. i.1 ETSI EG 201 399: “Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to the production of candidate Harmonized Standards for applicati

15、on under the R it provides a statement of all the test procedures corresponding to those essential requirements by cross reference to (a) specific clause(s) in the present document or to (a) specific clause(s) in (a) specific referenced document(s); it qualifies each requirement to be either: - Unco

16、nditional: meaning that the requirement applies in all circumstances; or - Conditional: meaning that the requirement is dependent on the manufacturer having chosen to support optional functionality defined within the schedule. in the case of Conditional requirements, it associates the requirement wi

17、th the particular optional service or functionality; it qualifies each test procedure to be either: - Essential: meaning that it is included with the Essential Radio Test Suite and therefore the requirement shall be demonstrated to be met in accordance with the referenced procedures; - Other: meanin

18、g that the test procedure is illustrative but other means of demonstrating compliance with the requirement are permitted. Table A.1: HS Requirements and conformance Test specifications Table (HS-RTT) Harmonized Standard EN 302 435-2 The following requirements and test specifications are relevant to

19、the presumption of conformity under the article 3.2 of the R those designated “O“ make up the Other Test Suite; for those designated “X“ there is no test specified corresponding to the requirement. The completion of all tests classified “E“ as specified with satisfactory outcomes is a necessary cond

20、ition for a presumption of conformity. Compliance with requirements associated with tests classified “O“ or “X“ is a necessary condition for presumption of conformity, although conformance with the requirement may be claimed by an equivalent test or by manufacturers assertion supported by appropriat

21、e entries in the technical construction file. Clause Number Identification of clause(s) defining the test specification in the present document unless another document is referenced explicitly Where no test is specified (that is, where the previous field is “X“) this field remains blank. ETSI ETSI E

22、N 302 435-2 V1.3.1 (2009-12) 11Annex B (informative): The EN title in the official languages The enlargement of the European Union (EU) resulted in a requirement from the EU for a larger number of languages for the translation of the titles of Harmonized Standards and mandated ENs that are to be lis

23、ted in the Official Journal to support the implementation of this legislation. For this reason the title translation concerning the present document can be consulted via the e-approval application. ETSI ETSI EN 302 435-2 V1.3.1 (2009-12) 12Annex C (informative): Bibliography ETSI TR 102 495-1 (V1.1.

24、1): “Technical characteristics for SRD equipment using Ultra Wide Band Sensor technology (UWB); System Reference Document Part 1: Building material analysis and classification applications operating in the frequency band from 2,2 GHz to 8 GHz“. ETSI TR 100 028 (V1.4.1) (all parts): “Electromagnetic

25、compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics“. ETSI ETSI EN 302 435-2 V1.3.1 (2009-12) 13History Document history V1.2.1 April 2008 Publication V1.3.1 August 2009 One-step Approval Procedure OAP 20091205: 2009-08-07 to 2009-12-07 V1.3.1 December 2009 Publication