EN 50411-3-3-2011 en Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-3 Singlemode optical fibre fusion splice prot.pdf

《EN 50411-3-3-2011 en Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-3 Singlemode optical fibre fusion splice prot.pdf》由会员分享，可在线阅读，更多相关《EN 50411-3-3-2011 en Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-3 Singlemode optical fibre fusion splice prot.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 50411-3-3:2011Fibre organisers and closuresto be used in optical fibrecommunication systems Product specifications -Part 3-3: Singlemode optical fibre fusionsplice protecto

2、rsBS EN 50411-3-3:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN50411-3-3:2011.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/86/2, Fibre optic interconnecting devices and passivecomponents.A list of organizations represent

3、ed on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012ISBN 978 0 580 70628 8ICS 33.180.20Compliance with a British

4、 Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2012.Amendments issued since publicationDate Text affectedBS EN 50411-3-3:2011EUROPEAN STANDARD EN 50411-3-3 NORME EUROPENNE EURO

5、PISCHE NORM December 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and

6、by any means reserved worldwide for CENELEC members. Ref. No. EN 50411-3-3:2011 E ICS 33.180.20 English version Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-3: Singlemode optical fibre fusion splice protectors Organiseurs et botier

7、s de fibres destins tre utiliss dans les systmes de communication par fibres optiques - Spcifications de produits - Partie 3-3: Protecteurs dpissures par fusion de fibres optiques unimodales LWL-Spleikassetten und -Muffen fr die Anwendung in LWL-Kommunikationssystemen - Produktnormen - Teil 3-3: Fus

8、ionsspleischutze fr Einmodenfasern This European Standard was approved by CENELEC on 2011-11-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up

9、-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by t

10、ranslation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republi

11、c, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 50411-3-3:2011EN 50411-3-3:2011 - 2 - Conten

12、ts Page 1 Scope 61.1 Product definition . 6 1.2 Interoperability 61.3 Expected performance . 61.4 Operating environment. 61.5 Reliability 61.6 Quality assurance 62 Normative references 63 Description . 73.1 Fusion splice protector . 73.1.1 General 73.1.2 Heat shrinkable splice protector type . 83.1.

13、3 Fold over or clam shell splice protector type . 83.2 Materials . 93.3 Dimensions 93.4 Colour and marking 94 Variants . 95 Dimensional requirements 115.1 Heat shrinkable splice protector (S type) . 115.2 Fold over or clam shell splice protector (F type) 136 Tests 136.1 Introduction 136.2 Test sampl

14、e preparation 136.3 Test and measurement methods . 136.4 Pass/fail criteria 147 Test report 148 Performance requirements . 148.1 Dimensional and marking requirements 148.2 Installation requirement 148.3 Optical performance requirements 15Annex A (normative) Fibre type 20Annex B (normative) Sample si

15、ze and product sourcing requirements 21Annex C (normative) Test sample description and installation 22C.1 Test sample layout for single fibre fusion splice protector . 22C.2 Preparation of single fibre test samples . 22C.3 Test sample layout for ribbon fibre fusion splice protector. 24C.4 Preparatio

16、n of ribbon fibre test samples 24Annex D (informative) Silicone band heat shrink fusion splice protectors . 26BS EN 50411-3-3:2011- 3 - EN 50411-3-3:2011 Figures Figure 1 Heat shrinkable splice protector 8Figure 2 Fold over or clam shell splice protector . 8Figure 3 Single fibre splice protector var

17、iant S1 as assembled . 11Figure 4 Ribbon fibre splice protectors variants S2, S3, S4, S5 as assembled . 11Figure 5 Single fibre splice protector variant S1 (fully recovered) 12Figure 6 Ribbon fibre splice protectors variants S2, S3, S4, S5 (fully recovered) . 12Figure 7 Fold over or clam shell splic

18、e protector (as delivered) 13Figure 8 Fold over or clam shell splice protector (installed) . 13Figure C.1 Test sample layout for single fibre fusion splice protector . 22Figure C.2 Test sample preparation - Step 1 . 22Figure C.3 Test sample preparation - Step 2 . 23Figure C.4 Test sample preparation

19、 - Step 3 . 23Figure C.5 Test sample layout for ribbon fibre fusion splice protector . 24Figure C.6 Test sample preparation for ribbon Step 1 24Figure C.7 Test sample preparation for ribbon - Step 2. 25Figure C.8 Test sample preparation for ribbon - Step 3. 25Figure D.1 Heat shrink splice protector

20、with silicone band 26Figure D.2 Typical silicone band dimensions for recovered diameters 2,2 mm to 2,4 mm . 26Tables Table 1 Optical fibre fusion splice protector, for category U Variants . 9Table 2 Outline and maximum dimensions for heat shrinkable fusion splice protectors . 12Table 3 Dimensions fo

21、ld over or clam shell splice protector 13Table 4 Test details and requirements . 15Table A.1 Fibre type characteristics . 20Table B.1 Sample size per test 21BS EN 50411-3-3:2011EN 50411-3-3:2011 - 4 - Foreword This document (EN 50411-3-3:2011) has been prepared by CLC/TC 86BXA “Fibre optic interconn

22、ect, passive and connectorised components“. The following dates are fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-11-14 latest date by which the national standards conflicting with the EN have

23、to be withdrawn (dow) 2014-11-14 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. BS EN 50411-3-3:2011- 5 - EN 50411-3-3:2011 Fibre org

24、anisers and closures to be used in optical fibre communication systems - Product specifications Part 3-3: Singlemode optical fibre fusion splice protectors Description Performance Type: Fibre splice protector Application: EN 61753-1:2007, Category U Style: Fusion Operating wavelength: 1 260 nm to 1

25、625 nm Attenuation grades Maximum allowed change in attenuation 0,2 dB for 5 protected fusion splices placed in series Fibre category EN 60793-2-50 Type B 1.1 and B 1.3 Return loss grades Not applicable Related documents: EN 60793-2-50 Optical fibres Part 2-50: Product specifications Sectional speci

26、fication for class B single-mode fibres (IEC 60793-2-50) EN 61300 series Fibre optic interconnecting devices and passive components Basic test and measurement procedures (IEC 61300 series) EN 61753-1:2007 Fibre optic interconnecting devices and passive components performance standard Part 1: General

27、 and guidance for performance standards (IEC 61753-1:2007) Outline and nominal dimensions: LHWS typeLHWF typeProduct as installed or fully recovered Type Fibre W mm H mm L Available lengths mm F1 Single fibre 1,2 3,2 30 S1-12 Single fibre 1,25 1,25 15/20/25/30 S1-13 Single fibre 1,3 1,3 15/20/25/30

28、S1-16 Single fibre 1,6 1,5 15/20/25/30/40 S1-22 Single fibre 2,2 2,2 25/30/35/40/45 S1-24 Single fibre 2,4 2,4 20/25/35/40/45/60 S1-26 Single fibre 2,6 2,6 35/40/45/60 S1-32 Single fibre 3,2 3,2 45/60 S1-37 Single fibre 3,7 3,7 68 S2-37 Ribbon 4 3,7 3,5 40/45 S3-40 Ribbon 8 4,0 3,7 40/45 S4-45 Ribbo

29、n 12 4,5 4,0 25/30/40/45 BS EN 50411-3-3:2011EN 50411-3-3:2011 - 6 - 1 Scope 1.1 Product definition This European Standard contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements, which a singlemode fusion splice protector need to meet in order

30、 for it to be categorised as an EN standard product. Although in this document the product is qualified for EN 60793-2-50 type B1.1 and B1.3 singlemode fibres it may also be suitable for fusion splice protection of multimode fibre with 125 m diameter glass cladding and other singlemode fibres with 1

31、25 m diameter glass cladding at other wavelengths. 1.2 Interoperability The installed fusion splice protector needs to fit into optical fibre splice cassettes or splice trays. This European Standard specifies the following physical interface dimensions: cross sectional profile with width, height or

32、diameter(in millimetres); length (in millimetres). 1.3 Expected performance In this European Standard, the performance of the fusion splice protector is given with selected fibres as specified in Annex A. 1.4 Operating environment The tests selected combined with the severities and durations are rep

33、resentative of an outdoor enclosed environment defined as category U in EN 61753-1. To ensure that the product can be used in closures, boxes or street cabinet for categories C, A, G and S (as defined EN 61753-1) the specified lower temperature is extended to -40 C and requirements for temporary flo

34、oding have been added. 1.5 Reliability Whilst the anticipated service life expectancy of the product in this environment is at least 20 years, compliance with this specification does not guarantee the reliability of the product. This should be predicted using a recognised reliability assessment prog

35、ramme. 1.6 Quality assurance Compliance with this specification does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme. 2 Normative references The following referenced documents are indispensable for the application o

36、f this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 60793-2-50, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres (IEC

37、 60793-2-50) EN 61300 (all parts), Fibre optic interconnecting devices and passive components Basic test and measurement procedures (IEC 61300 all parts) BS EN 50411-3-3:2011- 7 - EN 50411-3-3:2011 EN 61300-1, Fibre optic interconnecting devices and passive components Basic test and measurement proc

38、edures Part 1: General and guidance (IEC 61300-1) EN 61300-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) (IEC 61300-2-1) EN 61300-2-4, Fibre optic interconnecting devices and passive components Basic test

39、and measurement procedures Part 2-4: Tests Fibre/cable retention (IEC 61300-2-4) EN 61300-2-5, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-5: Tests Torsion (IEC 61300-2-5) EN 61300-2-7, Fibre optic interconnecting devices and passive compon

40、ents Basic test and measurement procedures Part 2-7: Tests Bending moment (IEC 61300-2-7) EN 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock (IEC 61300-2-9) EN 61300-2-17, Fibre optic interconnecting devices and passiv

41、e components Basic test and measurement procedures Part 2-17: Tests Cold (IEC 61300-2-17) EN 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance (IEC 61300-2-18) EN 61300-2-22, Fibre optic i

42、nterconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Change of temperature (IEC 61300-2-22) EN 61300-2-26, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-26: Tests Salt mist (IEC 61300-2-26) EN 6

43、1300-2-45, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-45: Tests Durability test by water immersion (IEC 61300-2-45) EN 61300-2-46, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-46:

44、Tests Damp heat cyclic (IEC 61300-2-46) EN 61300-3-3, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-3: Examinations and measurements Active monitoring of changes in attenuation and return loss (IEC 61300-3-3) EN 61300-3-28, Fibre optic interc

45、onnecting devices and passive components Basic test and measurement procedures Part 3-28: Examinations and measurements Transient loss (IEC 61300-3-28) EN 61753-1:2007, Fibre optic interconnecting devices and passive components performance standard Part 1: General and guidance for performance standa

46、rds (IEC 61753-1:2007) 3 Description 3.1 Fusion splice protector 3.1.1 General A singlemode fibre fusion splice protector is a passive component, which provides mechanical and environmental protection to a single fibre or ribbon fibre fusion splice. The fused fibres are protected against ingress of

47、dust or temporary flooding by a sealing material, generally a polymer material like hot melt adhesive or mastic. BS EN 50411-3-3:2011EN 50411-3-3:2011 - 8 - The products described in this standard are based on various protection types: heat shrinkable splice protector; fold over splice protector (al

48、so called clam shell splice protector). 3.1.2 Heat shrinkable splice protector type Prior to the splicing, the splice protector is put over one of the fibre or ribbon ends. After the fusion of the fibres, the splice protector is placed over the spliced area. After visual centring over the fused area the splice protector is shrunk by heating equipment. The typical fusion splice protector is composed of three elements: 123Key 1 a reinforcement member to give rigidity after the protector is installed in the he