EN 3375-009-2009 781 Aerospace series - Cable electrical for digital data transmission - Part 009 Single braid - CAN Bus - 120 Ohms - Type WX - Product standard《数字数据传输用航空级电缆 第009部分.pdf

《EN 3375-009-2009 781 Aerospace series - Cable electrical for digital data transmission - Part 009 Single braid - CAN Bus - 120 Ohms - Type WX - Product standard《数字数据传输用航空级电缆 第009部分.pdf》由会员分享，可在线阅读，更多相关《EN 3375-009-2009 781 Aerospace series - Cable electrical for digital data transmission - Part 009 Single braid - CAN Bus - 120 Ohms - Type WX - Product standard《数字数据传输用航空级电缆 第009部分.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN3375-009:2009ICS 49.06NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Cable, electrical,for digital datatransmissionPart 009: Single braid CAN Bus 120 Ohms Type WX Productstandard0Copyright European Committee for Standardization Provided by

2、 IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 March2009 BSI 2009ISBN 978 0 580 62408 7Amendments/corrigenda issued since publicatio

3、nDate CommentsBS EN 3375-009:2009National forewordThis British Standard is the UK implementation of EN 3375-009:2009.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this c

4、ommittee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Copyright European Committee f

5、or Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3375-009:2009EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 3375-009February 2009ICS 49.060English VersionAerospace series - Cable, electrical, for dig

6、ital data transmission- Part 009: Single braid - CAN Bus - 120 Ohms - Type WX -Product standardSrie arospatiale - Cbles lectriques pour transmissionde donnes numriques - Partie 009: Simple tresse - BusCAN - 120 Ohms - Type WX - Norme de produitLuft- und Raumfahrt - Elektrische Leitungen frDigitaldat

7、enbertragungen - Teil 009: Einfach Geschirmt -Bus CAN - 120 Ohm - Type WX - ProduktnormThis European Standard was approved by CEN on 11 July 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a

8、national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version i

9、n any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, E

10、stonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPI

11、SCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3375-009:2009: ECopyright European Committee for Standardization Provided by IHS under license with CEN

12、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3375-009:2009EN 3375-009:2009 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .44 Required characteristics .44.1 Dimensions and mass .44.2 General characteristics .54.3 Ele

13、ctrical characteristics 55 Tests 66 Quality assurance 87 Identification and marking (according to EN 3375-002 and TR 6058) .97.1 Designation 97.2 Short designation 97.3 Marking .97.4 Colour of the marking on the jacket 97.5 Colour of components 98 Packaging .99 Technical specification .9Copyright Eu

14、ropean Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3375-009:2009EN 3375-009:2009 (E) 3 Foreword This document (EN 3375-009:2009) has been prepared by the Aerospace and Defence Industries

15、Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN.

16、 This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at the latest by August 2009. Attention is drawn to the possibility that some of

17、 the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implemen

18、t this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and

19、 the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3375-009:2009EN 3375-009:2009 (E) 4 1 Scope This standard specifies the required characteristics of sin

20、gle braid, 120 Ohms, size 26, electrical cable type WX, intended for digital data transmissions. It shall be used together with EN 3375-001. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited

21、applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3375-001, Aerospace series Cable, electrical, for digital data transmission Part 001: Technical specification EN 3375-002, Aerospace series Cable, electrical, for digital data transm

22、ission Part 002: General 1EN 3475-100*, Aerospace series Cables, electrical, aircraft use Test methods Part 100: General EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts TR 6058, Aerospace series Cable code identification list 23 Terms and def

23、initions For the purposes of this document, the terms and definitions given in EN 3475-100 apply. 4 Required characteristics 4.1 Dimensions and mass See Figure 1 and Table 1. * And all parts quoted in Table 2. 1 Published as ASD Prestandard at the date of publication of this standard. 2 Published as

24、 ASD Technical Report at the date of publication of this standard. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3375-009:2009EN 3375-009:2009 (E) 5 Key c Two size 26 str

25、anded silver plated copper alloy conductors d Insulation material of the two elements: Fluorocarbon (colour: see 7.5) e Two expanded fluorocarbon fillers f Silver (C) plated copper strands ( 0,08 mm) braided screen g Outer sheath: Fluorocarbon (colour: see 7.5) Figure 1 Table 1 Conductor Insulation

26、Braid screen Outer sheath Mass fComposition diameter diameter diameter diameter min. max. max. max. min. max. max. N mm mm mm mm mm g/m 7 0,16 0,46 0,48 1,12 2,60 2,70 2,90 18 4.2 General characteristics Operating temperature . : 55 C to 200 C Minimum static bending radius : R = 20 mm Minimum dynami

27、c bending radius : R = 30 mm 4.3 Electrical characteristics Impedance . : 100 60 N Not applicable 506 Plating continuity Applicable Applicable (shield strands) 507 Adherence of plating Applicable Applicable (shield strands) 508 Plating thickness Not applicable Not applicable 509 Solderability Applic

28、able Applicable 510 Tensile strength and elongation of extruded insulation, sheath and jacket material Not applicable Not applicable 511 Cable-to-cable abrasion Not applicable Not applicable 512 Flexure endurance Not applicable Not applicable 513 Deformation resistance (Installation with plastic cab

29、le ties) Not applicable Not applicable 514 Porosity of copper cladding Not applicable Not applicable 601 Smoke density Not applicable Applicable 602 Toxicity Not applicable Applicable 603 Resistance to wet arc tracking Not applicable Not applicable continued Copyright European Committee for Standard

30、ization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3375-009:2009EN 3375-009:2009 (E) 8 Table 2 (concluded) EN 3475- Designation of the test Carried out on Component a Cable 604 Resistance to dry arc propagation Not a

31、pplicable Not applicable 605 Wet short circuit test Not applicable Not applicable 701 Strippability and adherence of insulation to the conductor Applicable 0,5 daN Applicable 702 Screen pushback capability Not applicable Applicable 703 Permanence of manufacturers marking Not applicable Applicable 70

32、4 Flexibility Not applicable Not applicable 705 Contrast measurement Not applicable Not applicable 706 Laser markability Not applicable Not applicable 801 Capacitance per unit length Not applicable Mutual capacitance C 45 pF/m 802 Capacitance unbalance Not applicable Applicable 66 % 805 Characterist

33、ic impedance Not applicable Applicable Differential impedance () 100 Zc 120 up to 20 MHz108 Zc 132 up to 1 MHz 806 Attenuation Not applicable Applicable Finished cable A 3 dB/100 m at 1 MHz A 8 dB/100 m at 5 MHz 807 Transfer impedance Not applicable Applicable as 4.3 808 Cross-talk Not applicable No

34、t applicable 809 Resistance unbalance (DC) Not applicable Not applicable 810 Structural return loss Not applicable Not applicable 811 Unbalance attenuation Not applicable Not applicable aSamples from finished cable. 6 Quality assurance See EN 9133. Copyright European Committee for Standardization Pr

35、ovided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3375-009:2009EN 3375-009:2009 (E) 9 7 Identification and marking (according to EN 3375-002 and TR 6058) 7.1 Designation EXAMPLE Description blockELECTRICAL CABLE Identity bloc

36、k EN3375-009C Reference of this standard Nature of braid (C: silver plated) 7.2 Short designation According to TR 6058: WX 26. 7.3 Marking Example of marking on cable: EN WX 26 FR X 06. 7.4 Colour of the marking on the jacket Green (preferential) or black. 7.5 Colour of components Cores: 1 Blue + 1

37、Red. Jacket: White. 8 Packaging See EN 3375-001. 9 Technical specification See EN 3375-001. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN3375-009:2009BSI GroupHeadquarter

38、s 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Roy

39、al Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccu

40、racy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ens

41、uresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/

42、creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on na

43、tional, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048

44、Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regardi

45、ng online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardizati

46、on bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the fre

47、e use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-