ECA EIA-60384-19-2014 Fixed Capacitors for Use in Electronic Equipment - Part 19 Sectional Specification - Fixed Metallized Polyphenylene- Terephthalate Film Dielectric Surface Mou.pdf

《ECA EIA-60384-19-2014 Fixed Capacitors for Use in Electronic Equipment - Part 19 Sectional Specification - Fixed Metallized Polyphenylene- Terephthalate Film Dielectric Surface Mou.pdf》由会员分享，可在线阅读，更多相关《ECA EIA-60384-19-2014 Fixed Capacitors for Use in Electronic Equipment - Part 19 Sectional Specification - Fixed Metallized Polyphenylene- Terephthalate Film Dielectric Surface Mou.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、 EIA STANDARD Fixed Capacitors for Use in Electronic Equipment Part 19: Sectional Specification Fixed Metallized Polyphenylene-Terephthalate Film Dielectric Surface Mount d.c. Capacitors EIA-60384-19 (IEC 60384-19:2006, IDT) October 2014 ANSI/EIA-60384-19-2014 Approved: October 3, 2014 EIA-60384-19

2、NOTICE EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum del

3、ay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of ECIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Public

4、ations preclude their voluntary use by those other than ECIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by ECIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, ECIA does

5、 not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This EIA Standard is identical (IDT) with the International Standard IEC Publication 60384-19:2006: Fixed Capacitors for Use in Electronic Equipment Part 19: Sec

6、tional Specification Fixed Metallized Polyphenylene-Terephthalate Film Dielectric Surface Mount d.c. Capacitors. This document is the EIA Standard EIA-60384-19 2014 Edition 2: Fixed Capacitors for Use in Electronic Equipment Part 19: Sectional Specification Fixed Metallized Polyphenylene-Terephthala

7、te Film Dielectric Surface Mount d.c. Capacitors. The text, figures and tables of IEC 60384-19:2006 are used in this Standard with the consent of the IEC and the American National Standards Institute (ANSI). These materials are subject to copyright claims of IEC and ECIA. No part of this publication

8、 may be reproduced in any form, including an electronic retrieval system, without the prior written permission of ECIA. All requests pertaining to EIA-60384-19 2014 Edition 2: Fixed Capacitors for Use in Electronic Equipment Part 19: Sectional Specification Fixed Metallized Polyphenylene-Terephthala

9、te Film Dielectric Surface Mount d.c. Capacitors should be submitted to ECIA at the address below. The IEC copyrighted material has been reproduced with permission from ANSI. The IEC Foreword and Introduction are not part of the requirements of this standard but are included for information purposes

10、 only. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitati

11、ons before its use. (From Standards Proposal No. 5274, formulated under the cognizance of the P-2.2 Committee on EIA Paper, Film, Mica any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizati

12、ons liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matter

13、s express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

14、Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC N

15、ational Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides

16、 no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees,

17、 servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publ

18、ication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possib

19、ility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-19 has been prepared by technical committee 40: Capacitors and resistors for electronic equip

20、ment. This second edition cancels and replaces the first edition published in 1993 and constitutes minor revisions related to tables, figures and references. This bilingual version (2012-03) corresponds to the monolingual English version, published in 2006-01. EIA-60384-19 Page 2 The text of this st

21、andard is based on the following documents: FDIS Report on voting 40/1622/FDIS 40/1645/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The French version of this standard has not been voted upon. This publication

22、 has been drafted in accordance with the ISO/IEC Directives, Part 2. IEC 60384 consists of the following parts, under the general title Fixed capacitors for use in electronic equipment: Part 1: Generic specification Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film di

23、electric d.c. capacitors Part 3: Sectional specification: Fixed tantalum surface mount capacitors Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte Part 5: Sectional specification: Fixed mica dielectric d.c. capacitors with a rated voltage not ex

24、ceeding 3000 V - Selection of methods of test and general requirements Part 6: Sectional specification: Fixed metallized polycarbonate film dielectric d.c. capacitors Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 Part 9: Sectional specification: Fixed capacitors of

25、 ceramic dielectric, Class 2 Part 11: Sectional specification: Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors Part 12: Sectional specification: Fixed polycarbonate film dielectric metal foil d.c. capacitors Part 13: Sectional specification: Fixed polypropylene film diele

26、ctric metal foil d.c. capacitors Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte Part 16: Sectional specification: Fixed

27、metallized polypropylene film dielectric d.c. capacitors Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors Part 18: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with solid and non-solid electrolyte Part 19: Se

28、ctional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors Part 20: Sectional specification: Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors Part 21: Sectional specification: Fixed surface mount multilayer cap

29、acitors of ceramic dielectric, Class 1 Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 EIA-60384-19 Page 3 Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors Part 24: Sect

30、ional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte 1Part 25: Sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte1 All sectional specifications mentioned above do ha

31、ve one or more blank detail specifications being a supplementary document, containing requirements for style, layout and minimum content of detail specifications. The QC number that appears on the front cover of this publication is the specification number in the IECQ Quality Assessment System for E

32、lectronic Components. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed

33、; withdrawn; replaced by a revised edition, or amended. 1To be published. EIA-60384-19 Page 4 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 19: Sectional specification Fixed metallized polyethylene- terephthalate film dielectric surface mount d.c. capacitors 1 General 1.1 Scope This part of

34、IEC 60384 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene-terephthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted direct onto substrat

35、es for hybrid circuits or onto printed boards. These capacitors may have “self-healing properties“ depending on conditions of use. They are primarily intended for applications where the a.c. component is small with respect to the rated voltage. Capacitors for electromagnetic interference suppression

36、 are not included but are covered by IEC 60384-14. 1.2 Object The object of this standard is to prescribe preferred ratings and characteristics and to select from IEC 60384-1:1999, the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements

37、 for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification shall be of equal or higher performance level, because lower performance levels are not permitted. 1.3 Normative references The following referenced documents a

38、re indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60063:1963, Preferred number series for resistors and capacitors Amendment 1 (196

39、7) Amendment 2 (1977) IEC 60068-1, Environmental testing Part 1: General and guidance IEC 60384-1, Fixed capacitors for use in electronic equipment Part 1: Generic specification IEC 60410, Sampling plans and procedures for inspection by attributes ISO 3, Preferred numbers Series of preferred numbers

40、 1.4 Information to be given in a detail specification Detail specifications shall be derived from the relevant blank detail specification. Detail specifications shall not specify requirements inferior to those of the generic, sectional or blank detail specification. When more severe requirements ar

41、e included, they shall be listed in 1.9 of the detail specification and indicated in the test schedules, for example, by an asterisk. EIA-60384-19 Page 5 NOTE The information given in 1.4.1 may, for convenience, be presented in tabular form. The following information shall be given in each detail sp

42、ecification and the values quoted shall preferably be selected from those given in the appropriate clause of this sectional specification. 1.4.1 Outline drawing and dimensions There shall be an illustration of the capacitor as an aid to easy recognition and for comparison of the capacitor with other

43、s. Dimensions and their associated tolerances, which affect inter-changeability and mounting, shall be given in the detail specification. All dimensions are preferably to be stated in millimetres. Normally, the numerical values shall be given for the length, width and height of the body. When necess

44、ary, for example when a number of items (sizes and capacitance/voltage ranges) is covered by a detail specification, the dimensions and their associated tolerances shall be placed in a table below the drawing. When the configuration is other than described above, the detail specification shall state

45、 such dimensional information as will adequately describe the capacitor. 1.4.2 Mounting The detail specification shall give guidance on methods of mounting for normal use. Mounting for test and measurement purposes (when required) shall be in accordance with 4.1 of this sectional specification. 1.4.

46、3 Ratings and characteristics The ratings and characteristics shall be in accordance with the relevant clauses of this specification, together with the following. 1.4.3.1 Rated capacitance range See 2.2.1. NOTE When products approved to the detail specification have different ranges, the following s

47、tatement should be added: “The range of capacitance values available in each voltage range is given in IEC QC 001005.“. 1.4.3.2 Particular characteristics Additional characteristics may be listed, when they are considered necessary to specify adequately the component for design and application purpo

48、ses. 1.4.3.3 Soldering The detail specification shall prescribe the test methods, severities and requirements applicable for the solderability and the resistance to soldering heat tests. 1.4.4 Marking The detail specification shall specify the content of the marking on the capacitor and on the packa

49、ge. Deviations from 1.6 of this sectional specification, shall be specifically stated. 1.5 Terms and definitions For the purposes of this sectional specification, the terms and definitions given in IEC 60384-1, as well as the following, apply. EIA-60384-19 Page 6 1.5.1 surface mount capacitor capacitor whose small dimensions and nature or shape of terminations make it suitable for surface mounting in hybrid circuits and on printed boards 1.5.2 performance grade 1 capacitors (long-life) capacitors for long-life applications with stringent requirements