DIN EN 1993-1-2-2010 en 7619 Eurocode 3 Design of steel structures - Part 1-2 General rules - Structural fire design German version EN 1993-1-2 2005 + AC 2009《欧洲规范3 钢结构设计 第1-2部分 一般.pdf

《DIN EN 1993-1-2-2010 en 7619 Eurocode 3 Design of steel structures - Part 1-2 General rules - Structural fire design German version EN 1993-1-2 2005 + AC 2009《欧洲规范3 钢结构设计 第1-2部分 一般.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1993-1-2-2010 en 7619 Eurocode 3 Design of steel structures - Part 1-2 General rules - Structural fire design German version EN 1993-1-2 2005 + AC 2009《欧洲规范3 钢结构设计 第1-2部分 一般.pdf（80页珍藏版）》请在麦多课文档分享上搜索。

1、December 2010 Translation by DIN-Sprachendienst.English price group 28No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).I

2、CS 13.220.50; 91.010.30; 91.080.10!$lxZ“1738555www.din.deDDIN EN 1993-1-2Eurocode 3: Design of steel structures Part 1-2: General rules Structural fire design(includes Corrigendum AC:2009)English translation of DIN EN 1993-1-2:2010-12Eurocode 3: Bemessung und Konstruktion von Stahlbauten Teil 1-2: A

3、llgemeine Regeln Tragwerksbemessung fr den Brandfall(enthlt Berichtigung AC:2009)Englische bersetzung von DIN EN 1993-1-2:2010-12Eurocode 3: Calcul des structures en acier Partie 1-2: Rgles gnrales Calcul du comportement au feu(Corrigendum AC:2009 inclus)Traduction anglaise de DIN EN 1993-1-2:2010-1

4、2SupersedesDIN EN 1993-1-2:2006-10 andDIN EN 1993-1-2 www.beuth.deDocument comprises 80 pagesIn case of doubt, the German-language original shall be considered authoritative.Corrigendum 1:2009-0504.11 DIN EN 1993-1-2:2010-12 2 A comma is used as the decimal marker. National foreword This standard ha

5、s been prepared by Technical Committee CEN/TC 250 “Structural Eurocodes” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-52-22 AA Konstruktiver

6、baulicher Brandschutz. This European Standard is part of a series of standards dealing with structural design (Eurocodes) which are intended to be used as a package. In Guidance Paper L on the application and use of Eurocodes, issued by the EU Commission, reference is made to compulsory transitional

7、 periods for the introduction of the Eurocodes in the member states. The transitional periods correlate approximately with those given in the Foreword of this standard. In Germany, this standard is to be applied in conjunction with the National Annex. Attention is drawn to the possibility that some

8、of the elements of this document may be the subject of patent rights. DIN and/or DKE shall not be held responsible for identifying any or all such patent rights. In this standard a distinction is made between “Principles” and “Application Rules” (see ubclause 1.4). “Principles” are identified by the

9、 letter code “P” following the number of the clause (e.g. (1)P). Clauses without letter code “P” are considered to contain “Application Rules”. The start and finish of text introduced or altered by amendment is indicated in the text by tags . Amendments This standard differs from DIN V ENV 1993-1-2:

10、1997-05 as follows: a) the prestandard status has been changed to that of a full standard; b) the comments received from the national standards bodies have been taken into account and the text of the standard has been completely revised; c) Corrigendum EN 1993-1-2/AC:2005 has been incorporated. Comp

11、ared with DIN EN 1993-1-2:2006-10 and DIN EN 1993-1-2 Corrigendum 1:2009-05, the following corrections have been made: a) this standard is the consolidated version of the previous 2005 edition with Corrigendum AC:2009; b) the standard has been editorially revised. Previous editions DIN V ENV 1993-1-

12、2: 1997-05 DIN EN 1993-1-2: 2006-10 DIN EN 1993-1-2 Corrigendum 1: 2009-05 SEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1993-1-2 April 2005 + AC March 2009 English version Eurocode 3: Design of steel structures Part 1-2: General rules Structural fire design Eurocode 3: Calcul des structures

13、 en acier Partie 1-2: Rgles gnrales Calcul du comportement au feu Eurocode 3: Bemessung und Konstruktion von Stahlbauten Teil 1-2: Allgemeine Regeln Tragwerksbemessung fr den Brandfall EN 1993-1-2:2005 was approved by CEN on 2004-04-23 and Corrigendum AC:2009 on 2009-03-18. CEN members are bound to

14、comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Managem

15、ent Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the offi

16、cial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slo

17、vakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide

18、 for CEN national Members. Ref. No. EN 1993-1-2:2005 + AC:2009 EICS 13.220.50 ; 91.010.30 ; 91.080.10 Supersedes ENV 1993-1-2:1995Foreword .4 1. General 9 1.1 Scope 9 1.2 Normative references10 1.3 Assumptions .11 1.4 Distinction between principles and application rules.11 1.5 Terms and definitions

19、.11 1.6 Symbols 12 2 Basis of design.16 2.1 Requirements16 2.1.1 Basic requirements .16 2.1.2 Nominal fire exposure 16 2.1.3 Parametric fire exposure.16 2.2 Actions17 2.3 Design values of material properties 17 2.4 Verification methods 17 2.4.1 General .17 2.4.2 Member analysis.18 2.4.3 Analysis of

20、part of the structure .19 2.4.4 Global structural analysis .20 3 Material properties.20 3.1 General .20 3.2 Mechanical properties of carbon steels 20 3.2.1 Strength and deformation properties 20 3.2.2 Unit mass 20 3.3 Mechanical properties of stainless steels23 3.4 Thermal properties23 3.4.1 Carbon

21、steels 23 3.4.2 Stainless steels 26 3.4.3 Fire protection materials.26 4 Structural fire design .27 4.1 General .27 4.2 Simple calculation models27 4.2.1 General .27 4.2.2 Classification of cross-sections 28 4.2.3 Resistance .28 4.2.4 Critical temperature 36 4.2.5 Steel temperature development 37 4.

22、3 Advanced calculation models.43 4.3.1 General .43 4.3.2 Thermal response43 4.3.3 Mechanical response.43 4.3.4 Validation of advanced calculation models44 Annex A normative Strain-hardening of carbon steel at elevated temperatures.45 Annex B normative Heat transfer to external steelwork .47 Annex C

23、informative Stainless steel 65 Annex D informative Joints .73 EN 1993-1-2:2005 + AC:2009 (E) 2 DIN EN 1993-1-2:2010-12 EN 1993-1-2:2005 + AC:2009 (E) 3 Annex E informative Class 4 cross-sections .76 DIN EN 1993-1-2:2010-12 Background to the Eurocode programme In 1975, the Commission of the European

24、Community decided on an action programme in the field of construction, based on article 95 of the Treaty. The objective of the programme was the elimination of technical obstacles to trade and the harmonization of technical specifications. Within this action programme, the Commission took the initia

25、tive to establish a set of harmonized technical rules for the design of construction works which, in a first stage, would serve as an alternative to the national rules in force in the Member States and, ultimately, would replace them. For fifteen years, the Commission, with the help of a Steering Co

26、mmittee with Representatives of Member States, conducted the development of the Eurocodes programme, which led to the first generation of European codes in the 1980s. In 1989, the Commission and the Member States of the EU and EFTA decided, on the basis of an agreement1between the Commission and CEN

27、, to transfer the preparation and the publication of the Eurocodes to CEN through a series of Mandates, in order to provide them with a future status of European Standard (EN). This links de facto the Eurocodes with the provisions of all the Councils Directives and/or Commissions Decisions dealing w

28、ith European standards (e.g. the Council Directive 89/106/EEC on construction products - CPD - and Council Directives 93/37/EEC, 92/50/EEC and 89/440/EEC on public works and services and equivalent EFTA Directives initiated in pursuit of setting up the internal market). The Structural Eurocode progr

29、amme comprises the following standards generally consisting of a number of Parts: EN 1990 Eurocode 0: Basis of Structural Design EN 1991 Eurocode 1: Actions on structures EN 1992 Eurocode 2: Design of concrete structures EN 1993 Eurocode 3: Design of steel structures EN 1994 Eurocode 4: Design of co

30、mposite steel and concrete structures EN 1995 Eurocode 5: Design of timber structures EN 1996 Eurocode 6: Design of masonry structures EN 1997 Eurocode 7: Geotechnical design EN 1998 Eurocode 8: Design of structures for earthquake resistance EN 1999 Eurocode 9: Design of aluminium structures 1Agreem

31、ent between the Commission of the European Communities and the European Committee for Standardisation (CEN) concerning the work on EUROCODES for the design of building and civil engineering works (BC/CEN/03/89). Foreword This document (EN 1993-1-2:2005 + AC:2009) has been prepared by Technical Commi

32、ttee CEN/TC 250 “Structural Eurocodes”, the secretariat of which is held by BSI. CEN/TC 250 is responsible for all Structural Eurocodes. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 200

33、5, and conflicting national standards shall be withdrawn at the latest by March 2010. This document supersedes ENV 1993-1-2:1995. According to the CEN-CENELEC Internal Regulations, the National Standard Organisations of the Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,

34、Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 1993-1-2:2005 + AC:2009 (E) 4 DIN EN 1993-1-2:2010-12 following countries are bound to implement this European

35、 Standard: Austria, Belgium, Bulgaria, Croatia, safeguarded their right to determine values related to regulatory safety matters at national level where these continue to vary from State to State. Status and field of application of eurocodes The Member States of the EU and EFTA recognize that Euroco

36、des serve as reference documents for the following purposes : as a means to prove compliance of building and civil engineering works with the essential requirements of Council Directive 89/106/EEC, particularly Essential Requirement N1 Mechanical resistance and stability and Essential Requirement N2

37、 Safety in case of fire; as a basis for specifying contracts for construction works and related engineering services; as a framework for drawing up harmonized technical specifications for construction products (ENs and ETAs) The Eurocodes, as far as they concern the construction works themselves, ha

38、ve a direct relationship with the Interpretative Documents2referred to in Article 12 of the CPD, although they are of a different nature from harmonized product standards3. Therefore, technical aspects arising from the Eurocodes work need to be adequately considered by CEN Technical Committees and/o

39、r EOTA Working Groups working on product standards with a view to achieving full compatibility of these technical specifications with the Eurocodes. The Eurocode standards provide common structural design rules for everyday use for the design of whole structures and component products of both a trad

40、itional and an innovative nature. Unusual forms of construction or design conditions are not specifically covered and additional expert consideration will be required by the designer in such cases. National Standards implementing Eurocodes The National Standards implementing Eurocodes will comprise

41、the full text of the Eurocode (including any annexes), as published by CEN, which may be preceded by a National title page and National foreword, and may be followed by a National annex. The National annex may only contain information on those parameters which are left open in the Eurocode for natio

42、nal choice, known as Nationally Determined Parameters, to be used for the design of buildings and civil engineering works to be constructed in the country concerned, i.e. : values and/or classes where alternatives are given in the Eurocode, values to be used where a symbol only is given in the Euroc

43、ode, country specific data (geographical, climatic, etc.), e.g. snow map, the procedure to be used where alternative procedures are given in the Eurocode. It may contain decisions on the application of informative annexes, references to non-contradictory complementary information to assist the user

44、to apply the Eurocode. 2According to Art. 3.3 of the CPD, the essential requirements (ERs) shall be given concrete form in interpretative documents for the creation of the necessary links between the essential requirements and the mandates for harmonized ENs and ETAGs/ETAs. 3 According to Art. 12 of

45、 the CPD the interpretative documents shall : a) give concrete form to the essential requirements by harmonizing the terminology and the technical bases and indicating classes or levels for each requirement where necessary ; b) indicate methods of correlating these classes or levels of requirement w

46、ith the technical specifications, e.g. methods of calculation and of proof, technical rules for project design, etc. ; c) serve as a reference for the establishment of harmonized standards and guidelines for European technical approvals. EN 1993-1-2:2005 + AC:2009 (E) 5 Eurocode standards recognize

47、the responsibility of regulatory authorities in each Member State and have The Eurocodes, de facto, play a similar role in the field of the ER 1 and a part of ER 2. DIN EN 1993-1-2:2010-12 products There is a need for consistency between the harmonized technical specifications for construction produ

48、cts and the technical rules for works4. Furthermore, all the information accompanying the CE Marking of the construction products which refer to Eurocodes should clearly mention which Nationally Determined Parameters have been taken into account. Additional information specific to EN 1993-1-2 EN 199

49、3-1-2 describes the principles, requirements and rules for the structural design of steel buildings exposed to fire, including the following aspects. Safety requirements EN 1993-1-2 is intended for clients (e.g. for the formulation of their specific requirements), designers, contractors and relevant authorities. The general objectives of fire protection are to limit risks with respect to the individual and society, neighbouring property, and where required, environment or directly exposed property, in the case