DIN EN 12387-2010 Footwear leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements German version EN 12387 2005+A1 2009《鞋 皮.pdf

《DIN EN 12387-2010 Footwear leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements German version EN 12387 2005+A1 2009《鞋 皮.pdf》由会员分享，可在线阅读，更多相关《DIN EN 12387-2010 Footwear leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements German version EN 12387 2005+A1 2009《鞋 皮.pdf（43页珍藏版）》请在麦多课文档分享上搜索。

1、March 2010 Translation by DIN-Sprachendienst.English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、61.060!$ah“1620469www.din.deDDIN EN 12387Footwear, leather and imitation leather goods manufacturingmachines Modular shoe repair equipment Safety requirements (includes Amendment A1:2009)English translation of DIN EN 12387:2010-03Maschinen zur Herstellung von Schuhen, Leder- und Kunstlederwaren Schu

3、hreparaturmaschinen Sicherheitsanforderungen (enthlt nderung A1:2009)Englische bersetzung von DIN EN 12387:2010-03Machines pour la fabrication des chaussures et darticles chaussants en cuir et matriauxsimilaires Equipement modulaire de rparation de chaussures Prescriptions de scurit (Amendement A1:2

4、009 inclus)Traduction anglaise de DIN EN 12387:2010-03SupersedesDIN EN 12387:2006-04See start of validitywww.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 43 pages04.10 DIN EN 12387:2010-03 2 A comma is used as the decimal marker. Start o

5、f validity This standard takes effect on 1 March 2010. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 201 “Leather and imitation leather goods and footwear manufacturing machinery Safety” (Secretariat: UNI, Italy). The resp

6、onsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Section Schuh- und Ledermaschinen. Amendment of the European Machinery Directive has made it necessary to review the previously valid standard, EN 12378:2005, in terms o

7、f the essential requirements of the new European Machinery Directive, 2006/42/EC. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 98/37/EC (valid until 28 December 2009), and the “revised Machinery Directive”, Direct

8、ive 2006/42/EC, which takes effect on 29 December 2009, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directives. Once this standard is cited in the

9、Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in clause 2 and in the bibliography of

10、 the EN have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. Amendments This standard differs from DIN EN 12387:2006-04 as follows: a) Normative references have been updated. b) Table 2 “Methods of testing” has been updated. c) The information for use given i

11、n 7.2, 7.3 and 7.4 has been amended. d) Figures E.1, F.1 and F.2 have been changed. e) An informative Annex ZB “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC” has been included. Previous editions DIN EN 12387: 2006-04 EUROPEAN STANDARD NORME EU

12、ROPENNE EUROPISCHE NORM EN 12387:2005+A1 August 2009 ICS 61.060 Supersedes EN 12387:2005English Version Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements Machines pour la fabrication de chaussures et darticles chaussants en cui

13、r et matriaux similaires - Equipement modulaire de rparation de chaussures - Prescriptions de scurit Maschinen zur Herstellung von Schuhen, Leder- und Kunstlederwaren - Schuhrep raturmaschinen - Sicherheitsanforderungen This European Standard was approved by CEN on 10 January 2005 and includes Amend

14、ment 1 approved by CEN on 16 July 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such

15、 national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language

16、 and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem

17、bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All righ

18、ts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12387:2005+A1:2009: EaContents Page Foreword3 Introduction .4 1 Scope 5 2 Normative references 6 3 Terms and definitions .7 4 !List of significant hazards“9 5 Safety requirements and/or measures

19、. 17 6 Verification of safety requirements and/or measures. 22 7 Information for use . 26 Annex A (normative) Requirements for covers and guards 29 Annex B (normative) Requirements for hold-to-run control device for combined heel and sole presses 30 Annex C (normative) Noise test code for modular sh

20、oe repair equipment . 31 Annex D (normative) Requirements for dust extraction system. 34 Annex E (normative) Minimum distances and working height for finishing machines 35 Annex F (normative) 36 Annex G (informative) Lighting for finishing machines . 38 Annex ZA (informative) Relationship between th

21、is European Standard and the Essential Requirements of EU Directive 98/37/EC .39 Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC . 40 Bibliography. 41 DIN EN 12387:2010-03 EN 12387:2005+A1:2009 (E) 2EN 12387:2005+A1:2009 (

22、E) Foreword This document (EN 12387:2005+A1:2009) has been prepared by Technical Committee CEN/TC 201 “Leather and imitation leather goods and footwear manufacturing machinery - Safety”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard,

23、 either by publication of an identical text or by endorsement, at the latest by February 2010, and conflicting national standards shall be withdrawn at the latest by February 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. C

24、EN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2009-07-16. This document supersedes EN 12387:2005. The start and finish of text introduced or altered by amendment is indicated in the text by tags !

25、 “. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this doc

26、ument.“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,

27、 Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 12387:2010-03 3EN 12387:2005+A1:2009 (E) Introduction This document is a Type C standard as stated in !EN ISO 12100-1“. The machiner

28、y concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this Type C standard are different from those which are stated in Type A or B standards, the provisions of this Type C standard take precedence ove

29、r the provisions of the other standards, for machines that have been designed and built according to the provisions of this Type C standard. DIN EN 12387:2010-03 4EN 12387:2005+A1:2009 (E) 1 Scope 1.1 This document applies to the following machines including their additional equipment intended for t

30、he repair of footwear, leather and imitation leather goods as well as for the manufacture and repair of orthopaedic shoes hereafter called “Shoe Repair Machines“: a) Polishing machines; b) Trimming machines; c) Scouring machines; d) Finishing machines; e) Orthopaedic finishing machines; f) Heel and

31、sole press; g) Activating unit Adhesive; h) Orthopaedic vacuum moulding press; i) Orthopaedic presses; j) Extraction equipment; k) Powered ranging device; l) Edge inking or staining machines; m) Mechanism for stationary nailing and stapling tools. These machines can be standing alone or combined in

32、a modular system for shoe repairs or the production of orthopaedic shoes including the lasts. 1.2 This document does not apply to: a) Sewing machines b) Autosoling machines c) Sole stitching machines d) Hand operated pneumatic nail drivers or staple tackers. 1.3 This document specifies safety requir

33、ements for construction, transport, installation, setting, adjustment, programming or converting, operating, cleaning, maintenance for the machines listed in 1.1. 1.4 This document deals with all significant hazards, hazard situations and events relevant to shoe repair machines when they are used as

34、 intended and under the conditions foreseen by the manufacturer (see Clause 4). The document does not deal with hazards due to use of the machines different from the use defined in 1.1. 1.5 This document assumes the machines are: operated by adequately trained persons DIN EN 12387:2010-03 5EN 12387:

35、2005+A1:2009 (E) used with adequate workplace lighting (see EN 12464-1). 1.6 !This document is not applicable to shoe repair machines which are manufactured before the date of its publication as EN.“ 2 Normative references The following referenced documents are indispensable for the application of t

36、his document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 294:1992, Safety of machinery Safety distance to prevent danger zones being reached by the upper limbs EN 349:1993, Safety

37、of machinery Minimum gaps to avoid crushing of parts of the human body !deleted text“ !EN 574“, Safety of machinery Two-hand control devices Functional aspects Principles for design EN 626-1:1994, Safety of machinery Reduction of risks to health from hazardous substances emitted by machinery Part 1:

38、 Principles and specifications for machinery manufacturers EN 842, Safety of machinery Visual danger signals General requirements, design and testing EN 953:1997, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards !deleted text“ EN 982, Safety

39、 of machinery Safety requirements for fluid power systems and their components Hydraulics EN 983, Safety of machinery Safety requirements for fluid power systems and their components Pneumatics !deleted text“ EN 1088, Safety of machinery Interlocking devices associated with guards Principle for desi

40、gn and selection EN 1127-1, Explosive atmospheres Explosion prevention and protection Part 1: Basic concepts and methodology EN 1837, Safety of machinery - Integral lighting of machines EN 12545:2000, Footwear, leather and imitation leather goods manufacturing machines Noise test code Common require

41、ments EN 13478, Safety of machinery Fire prevention and protection !EN ISO 11688-1“, Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 11688-2, Acoustics - Recommended practice for the design of low-noise machinery and eq

42、uipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) DIN EN 12387:2010-03 6EN 12387:2005+A1:2009 (E) EN ISO 11689, Acoustics Procedure for the comparison of noise emission data for machinery and equipment EN ISO 12100-1:2003, Safety of machinery Basic concepts, gen

43、eral principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003) !EN ISO 13732-1, Ergonomics of the thermal environment Methods for the assessmen

44、t of human responses to contact with surfaces Part 1: Hot surfaces (ISO 13732-1:2006)“ !EN ISO 13849-1, Safety of machinery Safety-related parts of control systems Part 1: General principles for design (ISO 13849-1:2006)“ !EN ISO 13850, Safety of machinery Emergency stop - Principles for design (ISO

45、 13850:2006)“ !EN ISO 14122-1“, Safety of machinery-Permanent means of access to machinery Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001) !EN 60204-1:2006“, Safety of machinery Electrical equipment of machines Part 1: General requirements !(IEC 60204-1:2005 (modified)“

46、 !EN 60335-2-69:2003, Household and similar electrical appliances Safety Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use (IEC 60335-2-69:2002, modified)“ !EN 61310-1“, Safety of machinery Indication, marking and actuation P

47、art 1: Requirements for visual, auditory and tactile signals !(IEC 61310-1:2007)“ 3 Terms and definitions For the purposes of this document the terms and definitions given in EN ISO 12100-1:2003, EN ISO 12100-2:2003, and the following apply: 3.1 scouring section or machine section or machine which t

48、ransmits energy from a prime mover to a tool for the purpose of removing layers of material 3.2 abrasive disc/cone disc or cone of metal, wood, cloth, felt, rubber or paper having any surface consisting wholly or partly of abrasive material 3.3 polishing section or machine section or machine which t

49、ransmits energy from a prime mover to a tool for the purpose of removing or applying layers of material 3.4 trimming section or machine section or machine which transmits energy from a prime mover to a rotary tool for the purpose of trimming the edges of material DIN EN 12387:2010-03 7EN 12387:2005+A1:2009 (E) 3.5 naumkeag section section which transmits energy from a prime mover to an abrasive tool for the purpose of removing fine layers of materials 3.6 tool includes ro