CGSB 25 20-95-CAN CGSB-1995 Appret Pour Planchers《地板用表面密封剂》.pdf

《CGSB 25 20-95-CAN CGSB-1995 Appret Pour Planchers《地板用表面密封剂》.pdf》由会员分享，可在线阅读，更多相关《CGSB 25 20-95-CAN CGSB-1995 Appret Pour Planchers《地板用表面密封剂》.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、_. CGSB CAN/CGSB- 25.20-75 XX M 1874650 0026500 037 M Canadian General Standards Board CANICGSB-25.20-95 Supersedes CAN/CGSB-25.20-M88 Surface Sealer for Floors National Standard of Canada Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction

2、 or networking permitted without license from IHS-,-,-CGSB CAN/CGSB- 25.20-95 *Y D LB74650 0026501 T73 The CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this standard has been developed is a government agency within the Federal Department of Supply and Services. CGSB is engaged in th

3、e production of voluntary standards in a wide range of subject areas through the media of standards committees and the consensus process. The standards committees are composed of representatives of relevant interests including producers, consumers and other users, retailers, governments, educational

4、 institutions, technical, professional and trade societies, and research and testing organizations. Any given standard is developed on the consensus of views expressed by such representatives. The Ministers Advisory Council on CGSB reviews the results of the consensus process. CGSB has been accredit

5、ed by the Standards Council of Canada as a national standards-writing organization. The standards that it develops and offers as National Standards of Canada conform to the criteria and procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes

6、as national standards, CGSB produces standards to meet particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards and national standards developed by CGSB are developed in conformance with the policies described in the Policy Manua

7、l for the Development and Maintenance of Standards by CGSB. CGSB standards are subject to review and revision at any time, so as to ensure that they keep abreast of technological progress. Suggestions for their improvement, which are always welcome, should be brought to the notice of the standards c

8、ommittees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issues and amendments, and ordering instructions, will be found in the CGSB Catalogue, which is published ann

9、ually and is available without charge upon request. Although the intended primary application of this standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. Many tests required by

10、 CGSB standards are inherently hazardous. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed. CCSB takes no position respecting the validity of any patent rights asserted with any item connected with this s

11、tandard. Users of this standard are expressly advised that determination of the validity of any such patent rights are -entirely their own responsibility. Further information on CGSB and its services and standards may be obtained from: The Manager Marketing and Sales Services Canadian General Standa

12、rds Board Ottawa, Canada KIA 1G6 The STANDARDS COUNCIL OF CANADA is the co-ordinating body of the National Standards System, a federation of independent, autonomous organizations working towards the further development and improvement of voluntary standardization in the national interest. The princi

13、pal objectives of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering international

14、co-operation in the field of standards. A National Standard of Canada is a standard which has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a number of capable individuals whose collective interests provide, to the greatest practica

15、ble extent, a balance of representation of producers, users, consumers and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard that is capable of making a significant and timely contribution to the national interest. Approval of a standard as a Nat

16、ional Standard of Canada indicates that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the accredited standards-writing organization. Th

17、ose who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest edition from the organization preparing the standard. The responsibility for approving N

18、ational Standards of Canada rests with the: Standards Council of Canada 45 OConnor Street Suite 1200 Ottawa, Ontario KIP 6N7 by Telephone - (613) 941-8703 or - 1-800-665-CGSB (Canada onlv) by Mail - CGSB Sales Centre Ottawa, Canada KIA 1G6 in Person - Suite 1402 222 Queen Street Ottawa, Ontario Copy

19、right Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-7 CGSB CAN/CGSB- 25.20-75 * W 1874650 0026502 90T W NATIONAL STANDARD OF CANADA CANKGSB-25.20-95 Supersedes CAN/CGSB-25.20-M88 SURFACE SEAL

20、ER FOR FLOORS The Canadian General Standards Board administers a Qualification Listing Program for products conforming to the requirements of this standard. Further information on the listing program is available from the Conformity Assessment Directorate of CGSB. Prepared by the Approved by the * C

21、anadian General Standards Board &- Standards Council of Canada j Published March 1995 by the Canadian General Standards Board Ottawa, Canada KIA 1G6 Minister of Supply and Services Canada - 1995 No part of this publication may be reproduced in any form without the prior permission of the publisher.

22、Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- CGSB CAN/CGSB- E!5-E!O-q5 * 1874650 0026503 846 D Chambers, S. Beshai, J. Capill, W. Christison, J. Cook, B. Coomber, R. Cyr, P. Dadd,

23、 G. Dunlop, D. Enriquez, M. Gosling, D. Grant, C. Heilik, J. Layton, R. Legendre, F. CANADIAN GENERAL STANDARDS BOARD COMMITTEE ON WAXES AND POLISHES (Membership at date of approval) Chairperson Dell Tech Laboratories Ltd. Department of National Defence Diversey Inc. ORTECH City of Edmonton Saskatch

24、ewan Procurement Management Corporation Empire Maintenance Industries Inc. Ministry of Health, Ontario Dustbane Products Ltd. Retail Research Laboratories of Canada Canadian Sanitation Supply Association Department of Government Services, Manitoba Department of Consumer and Corporate Affairs Rohm &

25、Haas Canada Inc. Choisy Laboratory Ltd. Mommersteeg, M. Pecman, S. Philipp. H. Poutney, R. Roston, E.M. Schiff, N. Simon, T. Tryl, V. Poirier, R.R. Secretary S.C. Johnson and Son, Ltd. Department of National Defence Department of Supply and Services Ministry of Government Services, British Columbia

26、Dilmont Inc. Lever Industrial T. Eaton Co. Ltd. City of Toronto Canadian General Standards Board Acknowledgment is made for the translation of this National Standard of Canada by the Trandation Bureau of the Department of the Secretary of State. CANJCGSB-25.20-95 Copyright Canadian General Standards

27、 Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-T CGSB CAN/CGSB- 25.20-95 * W 1874650 002b504 782 CAN/CGSB-25.20-95 Supersedes CAN/CGSB-25.20-M88 CANADIAN GENERAL STANDARDS BOARD SURFACE SEALER FOR FLOORS 1. SCOPE 1.1 T

28、his standard applies to unpigmented sealer intended primarily for use on interior resilient and nonresilient floors other than those of wood or cork. 1.2 Sealers manufactured to this standard are intended for use in sealing resilient and nonresilient surfaces. These sealers may be used prior to the

29、application of maintenance finishes or as stand-alone sealer finishes. Type 1 solvent-based sealer should be used only on nonresilient surfaces such as concrete, terrazzo, marble, magnesite, ceramic and slate. Type 2 water-based sealer may be used on resilient surfaces such as asphalt, linoleum, vin

30、yl, vinyl composites, rubber and mastic, or on nonresilient surfaces as recommended by the manufacturer. Type 2 water-based sealer is the recommended choice in fire-hazard areas such as furnace rooms and where there is an open flame, and in hospital and food-processing areas where solvent fumes are

31、not permitted. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consu

32、lt the appropriate authorities and to establish appropriate health and safety practices in conjunction with any existing applicable regulatory requirements prior to its use. 1.3 2. APPLICABLE PUBLICATIONS 2.1 The following publications are applicable to this standard: 2.1.1 Canadian General Standard

33、s Board (CGSB) 1-GP-71 - Methods of Testing Paints and Pigments 25-GP-1 - Methods of Sampling and Testing Waxes and Polishes. 2.1.2 Department of Consumer and Corporate Affairs Principles and Guidelines for Environmental Labelling and Advertising. 2.1.3 American Society for Testing and Materials (AS

34、TM) D 56 - Test method for Flash Point by Tag Closed Tester D 1544 - Test Method for Color of Transparent Liquids (Gardner Color Scale) D 1545 - Test method for Viscosity of Transparent Liquid by Bubble Time Method D 1644 - Test methods for Nonvolatile Content of Varnishes. 2.2 Reference to the abov

35、e publications is to the latest issues, unless otherwise specified by the authority applying this standard. The sources of these publications are shown in the Notes section. 3. CLASSIFICATION 3.1 Sealers shall be supplied in the following types, as specified (par. 8.1): 3.1.1 Types Type 1 - Solvent-

36、based Type 2 - Water-based. 1 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CAN/CGSB- 25-20-95 * 1874650 002b505 bL7 m 4. 4.1 4.2 4.3 5. 5.1 5.2 5.3 5.4 5.5 5.6 5.6.1 5.6.2 5.6

37、.3 5.7 21 GENERAL REQUIREMENTS The sealer shall consist of a low-viscosity solution or a low-viscosity water emulsion, according to type, based on suitable resins. The sealer shall satisfactorily seal the pores of resilient and nonresilient floor surfaces, and/or shall provide the necessary foundati

38、on for the application of antislip floor finish. The sealer shall withstand storage in the original unopened container at normal room temperature for at least one year after shipment, without significant change from the original state or colour, and without showing tendency to “body” materially. DET

39、AILED REQUIREMENTS Flash Point (Type 1 only) - When tested in the Tag Closed Tester in accordance with ASTM D 56, the sealer shall show a flash point of not less than 38C. Viscosity - When tested in accordance with ASTM D 1545, the sealer shall show a viscosity of not more than 5.0 mm2/s (Viscosity

40、not exceeding Gardner-Holdt Letter A4 is acceptable) (Note 1). Non-volatile Content - When tested in accordance with ASTM D 1644, Method A, the content of non-volatile matter shall not be less than 12%. Drying Time - When tested in accordance with CGSB standard 1-GP-71, Method 5.1, by applying a wet

41、 film using a fixed-blade applicator with a clearance of 0.05 mm, the dry hard time shall not be more than 60 min. Sediment - When tested in accordance with CGSB standard 25-GP-1, Method 5.1, Type 1 sealer shall show no visible sediment. Type 2 sealer shall not contain more than 0.15% sediment. Coio

42、ur Colour us Received (Type I only) - When tested in accordance with ASTM D 1544, the colour of the sealer shall be a maximum of 1 when measured according to the Gardner Colour Scale. Colour of Evaporated Film - When tested in accordance with CGSB standard i-GP-71, Method 12.1, the colour of a dried

43、 film of the sealer shall be clear with no yellowness. The colour difference (AE) of a white carrara glass before and after application of the sealer, using the fixed-blade applicator with a 0.08 mm clearance, shall not exceed 4 units. Colour stability - When tested in accordance with CGSB standard

44、1-GP-71, Method 120.3, a carrara glass panel coated with the sealer, using a fixed-blade applicator with a 0.05 mm clearance, and exposed for 100 h in a Fade- Ometer, shall not show significant colour change of the film. The colour difference (AE) between the film after exposure and the original whi

45、te carrara glass shall not exceed 5 units. Chemical Resistance - When tested in accordance with par. 7.2.1, dried films of the sealer shall withstand the following chemical reagents without showing any damage more severe than slight whitening: Test Liquid Contact Time Water 18h Acid, 2% solution 6h

46、- lactic - citric - phosphoric - acetic Urea, 2% solution 6h Alkali, 1% solution 4h - Sodium hydroxide (NaOH) White mineral oil 6h - Nujol or equivalent Note I: Dynamic Viscosity Conversion from the CGS System to the International System of Unit is: 1 Poise = 0.1 Pa.s. CANICGSB-25.20-95 8 Copyright

47、Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CAN/CGSB- 25-20-95 * H 1874650 002b50b 555 H 5.8 6. 6.1 6.2 6.2. I 7. 7.1 7.2 7.2.1 8. 8.1 8.2 8.2.1 8.2.2 8.2.3 Test Liquid Contact Time So

48、lvent (50% isopropyl alcohol) Calcium chloride, 2% solution 6h 10 min (applicable to Type 1 sealer only) Slip Resistance - When tested in accordance with CGSB standard 25-GP- 1, Method 30.1, the slip resistance of the sealer shall be 0.5 minimum when tested by the static procedure using the James Ma

49、chine. PREPARATION FOR DELIVERY Packaging, Packing and Marking - Unless otherwise specified (par. 8. 1). normal commercial packaging, packing and marking shall be acceptable. Labelling - The label shall comply with the requirements of any relevant Government Acts and Regulations. Environmental claims and/or representations shall follow the Department of Consumer and Corporate Affairs “Principles and Guidelines for Environmental Labelling and Advertising.” INSPECT