TIA TSB2000-1999 Capabilities Requirements Mapping for cdma2000 Standards《CDMA2000标准的容量要求映射》.pdf

《TIA TSB2000-1999 Capabilities Requirements Mapping for cdma2000 Standards《CDMA2000标准的容量要求映射》.pdf》由会员分享，可在线阅读，更多相关《TIA TSB2000-1999 Capabilities Requirements Mapping for cdma2000 Standards《CDMA2000标准的容量要求映射》.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、 - “i STD-EIA TSB2000-ENGL 1997 3234bO b29944 32T H TIA/EIA TELECOMMUNICATIONS SYSTEMS BULLETIN Capabilities Requirements Mapping for cdma2000 Standards TSB2000 SEPTEMBER 1999 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Copyright Telecommunications Industry Association Provided by IHS under license with

2、 EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,- STD-EIA TSB2000-ENGL 1999 323Lib00 Ob29945 2bb NOTICE TIA/EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purch

3、asers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of MIA from

4、 manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and miblications preclude their voluntary use by those other than TIAEIA members, whether the standard is to be used either domestically or international1 y. Standards, Pub

5、lications and Bulletins are adopted by EL4 in accordance with the American National Standards Institute (ANSI) patent policy. By such action, “IA/EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard, Publication, or Bullet

6、in. Technical Bulletins are distinguished from TL4EI.A Standards or Interim Standards, in that they contain a compilation of engineering data or information useful to the technical community, and represent approaches to good engineering practices that are suggested by the formulating committee. This

7、 Bulletin is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or that may be acceptable to, or have been accepted by, appropriate bodies. Parties who wish to bring other approaches to the attention of the formulating committee to be consider

8、ed for inclusion in future revisions of this Bulletin are encouraged to do so. It is the intention of the formulating committee to revise and update this Bulletin from time to time as may be occasioned by changes in technology, industry practice, or government regulations, or for other appropriate r

9、easons. (From Project No. 4534, formulated under the cognizance of the TLA TR-45.5 Subcommittee on Spread Spectrum Digital Technology) Published by OTELECOMMUIViCATIONS INDUSTRY ASSOCIATION 1999 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 PRICE: Please refer to the

10、current Catalog of ELECTRONIC INDUSTRIES ALLIANCE STANDARDS and ENGINEERING PUBLICATIONS or cali Global Engineering Documents, USA and Canada (l-SOO-854- 7179) international (303-3W-7956) All rights reserved J?rinted in U.S.A. Copyright Telecommunications Industry Association Provided by IHS under l

11、icense with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 STD-EIA TSBZOOO-ENGL 1999 H 323qb00 Ob2994b LT2 = TIA/EIA/TSB2000 CONTENTS 1 INTRODUCTION 1-1 1.1 Capability Classifications 1-1 1.2 Capability Organization

12、. 1-1 1.3 Terms . 1-2 cdma2000 PHASE 1 REQUIREMENTS 2-1 2.1 Capacity . 2-1 2.2 Battery Life 2-2 2.3 Bearer Capability . 2-2 2.4 Handoff 2-3 2.5 Backward Compatibility . 2-4 2 TABLES Table 1 Capability Mapping for the Capacity Requirement 2-1 Table 2 Capability Mapping for the Battery Life (Standby T

13、ime) Requirement . 2-2 Table 3 Capability Mapping for the Bearer Capability Requirement . 2-3 Table 4 Capability Mapping for the Handoff Requirement 2-4 Table 5 Capability Mapping for the Backward Compatibility Requirement 2.4 i Copyright Telecommunications Industry Association Provided by IHS under

14、 license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA/EIA/TSB2000 i 1 INTRODUCTION 2 3 4 5 6 7 8 cdma2000 Phase 1 requirements: 9 TIA/EIA/IS-2000-2 Physical Layer Standard for cdmaZ000 Spread Spectrum 10 Sys tems 11 TIA/EIA/IS-2000-3 Medium Access Co

15、ntrol (M4C) Standard for cdma2000 Spread 12 Spectrum Systems 13 TIA/EIA/IS-2000-4 Signaling Link Access Control (LAC) Standard for cdma2000 14 Spread Spectrum Systems 15 TIA/EIA/IS-2000-5 Upper Layer (Layer 3) Signaling Standard for cdma2000 16 Spread Spectrum Systems 17 In addition, TIA/EIA/IS-707-

16、A-l Data Service Options for Spread Spectrum Systems - 18 Addendum 1 also defines capabilities supporting a cdma2000 Phase 1 requirement. 19 1.1 Capability Classifications 20 21 P requirement is not met. 23 24 25 26 27 1.2 Capability Organization a 29 30 31 groupings are: 32 0 33 2000-2. 34 35 2000-

17、3 and TIA/EIA/IS-707-A- 1. 36 37 TIA/EIA/IS-2000-4 and TIA/EIA/IS-2000-5. This Bulletin has been prepared by TIA Subcommittee TR-45.5 to map the capabilities in TIA standards that have been developed to support cdma2000 Phase 1 operation to the major requirements upon which that development was base

18、d. It is intended to furnish guidance to providers of cdma2000 systems in selecting the necessary features to meet their requirements as stated within the sections of TSB2000. The following TIA/EIA/IS-2000 standards spec capabilities which directly support For each requirement, capabilities are mapp

19、ed into one of two classifications: 0 The Essential classification contains those capabilities without which the 0 The Discretionary classification contains those capabilities which enhance how well the requirement is met, but are not essential to meet the requirement. Neither classification indicat

20、es whether the capability is mandatory or optional in the standard that specifies the capability. For each classification, capabilities are organized into 3 groups; this corresponds roughly to the specific TIA/EIA/IS-2000 standards that speci the capability. Capabilities defined in TIA/EIA/IS-707-A-

21、 1 are grouped with those specified in TIA/EIA/IS-2000-3. The The Physical Layer grouping contains those capabilities defined in TIA/EIA/IS- The RcP/MAC Layer grouping contains those capabilities defined TIA/EIA/IS- The Layer 2/Layer 3 Signaling grouping contains those capabilities defined in 0 0 1-

22、1 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 TIA/EIA/TSB2000 1.3 Terms Control Hold State. See TIA/EIA/IS-2000-3. F-DCCH.

23、 Forward Dedicated Control Channel (see TIA/EIA/IS-2000-2). F-FCH. Forward Fundamental Channel (see TIA/EIA/IS-2000-2). F-SCH. Forward Supplemental Channel (see TIA/EIA/IS-2000-2). MuxPDU. Multiplex Sublayer Protocoi Data Unit (see TIA/EIA/IS-2000-3) Orthogonal Transmit Diversity. See TIA/EIA/IS-200

24、0-2. Quasi-Orthogonal Function. See TIA/EIA/IS-2000-2. Quick Paging Channel. See TIA/EIA/IS-2000-2. R-DCCH. Reverse Dedicated Control Channel (see TIA/EIA/IS-2000-2). R-FCH. Reverse Fundamental Channel (see TIA/EIA/IS-2000-2). R-SCH. Reverse Supplemental Channel (see TIA/EIA/IS-2000-2). RC 1. Radio

25、Configuration 1 (see TIA/EIA/IS-2000-2). RC 2. Radio Configuration 2 (see TIA/EIA/IS-2000-2). RC 3. Radio Configuration 3 (see TIA/EIA/IS-2000-2). RC 4. Radio Configuration 4 (see TIA/EIA/IS-2000-2). RC 5. Radio Configuration 5 (see TIA/EIA/IS-2000-2). SCCH. Supplemental Code Channel (see TIA/EIA/IS

26、-2000-2). Short Data Burst. See TIA/EIA/IS-2000-3. Suspended State. See TIA/EIA/IS-2000-3. . 1-2 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Physical Layer RLP/MAC Layer 1 2

27、 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 ia 0 0 none RC 3 or RC 4 or RC 5 on the F-FCH RC 3 or RC 4 on the R-FCH. TiA/EIA/TSB2000 Layer 2/Layer 3 Signaling Signaling Support for RC 3, RC 4, RC 5 on the F-FCH (e.g., Service Negotiation, Channel Assignment) Signaling Support for RC 3, RC 4 on the R-FCH

28、(e.g., Service Negotiation, Channel Assignment) Physical Layer RLP/MAC Layer Layer 2ILayer 3 Signaling 0 Orthogonal Transmit Diversity (OTD) 0 Quasi-Orthogonal Function (QOF) none 0 Signaling Support for OTD Signaling Support for QOF cdmaOne is a trade name owned by the CDMA Development Group. This

29、information is given for the convenience of users of the Bulletin and does not constitute an endorsement by TIA of the product named. 2- 1 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license fro

30、m IHS-,-,-STDmEIA TSB2000-ENGL 1999 M 323Lib00 Ob29950 b23 Layer !/Layer 3 Signaling 1 2 3 4 5 6 7 a 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Signaling Support for F-QPCH TIA/EIA/TSB2000 Layer 2/Layer 3 Signaling 2.2 Battery Life The standby and talk times of current generation cdmaOnem handsets are

31、 significant parameters. The underlying battery technologies used by cdmaOnem and other technologies are fairly similar. It is apparent therefore that, for cdmaOnem devices to exceed standby and talk time capabilities of competing system technologies, closer attention must be paid to all other facto

32、rs influencing battery life. This is in addition to taking advantage of any advances in battery technology. Although it is known that manufacturer ingenuity in product design (e.g., use of efficient, low voltage/low power circuitry) is a significant factor in handset power consumption, it is also be

33、lieved that significant improvements in battery life can be achieved through more efficient design of the radio link signaling system and implementation of a faster and more accurate power control algorithm. As the next step in cdmaOneTM subscriber device evolution, appropriate enhancements must be

34、undertaken to significantly increase the standby time. Table 2 lists the capability mapping for this requirement. Table 2 Capability Mapping for the Battery Life (Standby Time) Requirement Essential Capabilities If a DCCH is used, signaling support for reverse pilot channel gating is necessary I Phy

35、sical Layer I Quick Paging Channel (F-QPCH) I I RLPMAC Layer I none I Physical Layer I If a DCCH is used, reverse pilot channel gating is necessary I I RLP/MAC Layer I none I 2.3 Bearer Capability In order to support 3G data services, it is essential that the bearer capability of cdma2000 systems be

36、 expanded beyond what is currently specified in TIA/EIA-95-B. It is strongly desired that near-term systems achieve the IMT-2000 vehicular speed requirement of 144 kbps. . 23 Table 3 lists the capability mapping for this requirement. 2-2 Copyright Telecommunications Industry Association Provided by

37、IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STD-EIA TSBZODO-ENGL 1999 m 323LibO Ob29951 5bT = RLPIMAC Layer 3yer 2/Layer 3 Signaling 0 0 0 0 Support for Control Hold and Suspended States Support for Short Data Burst (SDB) Signaling sup

38、port for mini messages (5 ms) Signaling support for Control Hold and Suspended States 0 Signaling Support for SDB TIA/EIA/TSB2000 Table 3 Capability Mapping for the Bearer Capability Requirement Physical Layer RLP/MAC Layer 3yer 2/Layer 3 Signaling Essential capabilities 0 One (1) of (FCH or DCCH) -

39、 RC 3 or RC 4 on the F-FCH or F-DCCH - RC 3 on the R-FCH or R-DCCH 0 One (1) SCH - - RC 3 or RC 4 on the F-SCH RC 3 on the R-SCH 0 Support for RLP3 (TIA/EIA/IS-707-A- 1.1 O) Support for 144 kbps Packet Data Service Option Support for MuxPDU Type 3 Support for multiplex option 0x809 or Ox81 1 or 0x82

40、1 or 0x905 or Ox909 or Ox9 1 1 or 0x92 1 Signaling Support for RC 3, RC 4 on F-FCH, F-DCCH, or F-SCH (e.g., Service Negotiation, Channel Assignment) Signaling Support for RC 3 on R-FCH, R-DCCH, or R- SCH (e.g., Service Negotiation, Channel Assignment) Signaling support for Supplemental Channel Reque

41、st Message Signaling support for Extended Supplemental Channel Assignment Message (TIA/EIA/IS-707-A- 1.1 1) 0 0 0 0 0 Discretionary Capabilities Physical Layer I 5 ms frames on the FCH or DCCH 2.4 Handoff Handoff overhead is still an item of concern to service providers, as this increases overall in

42、frastructure costs. The TIA/EIA-95-B hard handoff searching and handoff failure recovery procedures are expected to enhance hard handoffs. The TIAIEIA-95-B soft handoff algorithm is expected to reduce this handoff overhead. Nevertheless, further effort must be expended to improve handoff operations

43、so as to minimize the amount of system resources required to support handoffs. 2-3 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STDOEIA TSB2000-ENGL 1999 32311b00 Ob29952 L1T

44、b D Physical Layer RLP/MAC Laver TIA/EIA/TSB2000 none none Physical Layer RLP/MAC Layer Layer 2lLayer 3 Signaling I Layer ayer 3 signaling I none I Interfrequency Hard Handoff Improvements none Signaling Support for Hard Handoff Improvements Physical Layer RLPIMAC Layer Layer 2/Layer 3 Signaling 3 R

45、C 1 or RC 2 on F/R-FCH Signaling Support for TIA/EIA-95-B Support for TWEIA-95-B Multiplex Sublayer Support for Multiplex Option 1 Support for Multiplex Option 2 if RC 2 supported 4 Physical Layer RLP/MAC Layer Layer 2/Layer 3 Signaling 5 6 7 8 9 10 11 12 Support for SCCH Support for multiplex optio

46、ns 3 through 16 Support for Supplemental Channel Request Message Support for Supplemental Channel Assignment Message 13 14 15 2-4 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-