BS ISO 15242-3-2017 Rolling bearings Measuring methods for vibration Radial spherical and tapered roller bearings with cylindrical bore and outside surface《滚动轴承 振动测量方法 带圆孔和外表面的向心球面.pdf

《BS ISO 15242-3-2017 Rolling bearings Measuring methods for vibration Radial spherical and tapered roller bearings with cylindrical bore and outside surface《滚动轴承 振动测量方法 带圆孔和外表面的向心球面.pdf》由会员分享，可在线阅读，更多相关《BS ISO 15242-3-2017 Rolling bearings Measuring methods for vibration Radial spherical and tapered roller bearings with cylindrical bore and outside surface《滚动轴承 振动测量方法 带圆孔和外表面的向心球面.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、Rolling bearings Measuring methods for vibrationPart 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surfaceBS ISO 152423:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06 ISO 2017Rolling bearings Measuring methods for vibration P

2、art 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surfaceRoulements Mthodes de mesurage des vibrations Partie 3: Roulements rotule sur rouleaux et rouleaux coniques, alsage et surface extrieure cylindriquesINTERNATIONAL STANDARDISO15242-3Second edition2017-08Refer

3、ence numberISO 15242-3:2017(E)National forewordThis British Standard is the UK implementation of ISO 152423:2017. It supersedes BS ISO 152423:2006, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee MCE/7, Rolling bearings.A list of organizations represen

4、ted on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 9

5、4396 6ICS 21.100.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STAN

6、DARDBS ISO 152423:2017 ISO 2017Rolling bearings Measuring methods for vibration Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surfaceRoulements Mthodes de mesurage des vibrations Partie 3: Roulements rotule sur rouleaux et rouleaux coniques, alsage et surface

7、 extrieure cylindriquesINTERNATIONAL STANDARDISO15242-3Second edition2017-08Reference numberISO 15242-3:2017(E)BS ISO 152423:2017ISO 15242-3:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part o

8、f this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body

9、in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 152423:2017ISO 15242-3:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published i

10、n SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can

11、 be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO 15242-3:2017(E)Foreword ivIntroduction v1 S

12、cope . 12 Normative references 13 Terms and definitions . 14 Measurement process . 14.1 Rotational frequency 14.2 Bearing axial load . 25 Measurement and evaluation methods 25.1 Physical quantity measured. 25.2 Frequency domain . 25.3 Measurement of pulses and spikes 35.4 Measurement 36 Conditions f

13、or measurement . 36.1 Bearing conditions for measurement 36.1.1 Prelubricated bearings . 36.1.2 Non-prelubricated bearings . 36.2 Conditions of the measurement environment . 46.3 Conditions for the measuring device . 46.3.1 Stiffness of the spindle/mandrel arrangement . 46.3.2 Loading mechanism 46.3

14、.3 Magnitude and alignment of the external load applied to the bearing . 46.3.4 Axial location of the transducer and direction of measurement 56.3.5 Mandrel 6Annex A (normative) Measurement of external axial loading alignment 7 ISO 2017 All rights reserved iiiContents PageBS ISO 152423:2017ISO 15242

15、-3:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for

16、which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on al

17、l matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. Th

18、is document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any

19、 or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of

20、users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barr

21、iers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 4, Rolling bearings.This second edition cancels and replaces the first edition (ISO 15242-3:2006), which has been technically revised. It also incorporates the Techn

22、ical Corrigendum ISO 15242-3:2006/Cor. 1:2010.The main changes compared to the previous edition are as follows: editorial changes have been made for clarification and removal of inconsistencies; figure keys have been updated for clarification.A list of all parts in the ISO 15242 series can be found

23、on the ISO website.iv ISO 2017 All rights reservedBS ISO 152423:2017ISO 15242-3:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out th

24、rough ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collab

25、orates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval

26、 criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the su

27、bject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any

28、trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adh

29、erence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 4, Rolling bearings.This second edition cancels and replaces the first edition (ISO 1524

30、2-3:2006), which has been technically revised. It also incorporates the Technical Corrigendum ISO 15242-3:2006/Cor. 1:2010.The main changes compared to the previous edition are as follows: editorial changes have been made for clarification and removal of inconsistencies; figure keys have been update

31、d for clarification.A list of all parts in the ISO 15242 series can be found on the ISO website.iv ISO 2017 All rights reserved ISO 15242-3:2017(E)IntroductionVibration in rotating rolling bearings can be of importance as an operating characteristic of such bearings. The vibration can affect the per

32、formance of the mechanical system incorporating the bearing and can result in audible noise when the vibration is transmitted to the environment in which the mechanical system operates, can lead to damages, and can even create health problems.Vibration of rotating rolling bearings is a complex physi

33、cal phenomenon dependent on the conditions of operation. Measuring the vibration of an individual bearing under a certain set of conditions does not necessarily characterize the vibration under a different set of conditions or when the bearing becomes part of a larger assembly. Assessment of the aud

34、ible sound generated by the mechanical system incorporating the bearing is further complicated by the influence of the interface conditions, the location and orientation of the sensing device, and the acoustical environment in which the system operates. Assessment of airborne noise that, for the pur

35、pose of ISO 15242 (all parts), can be defined as any disagreeable and undesired sound is further complicated by the subjective nature of the terms disagreeable and undesired. Structure-borne vibration can be considered the driving mechanism that ultimately results in the generation of airborne noise

36、. Only selected methods for the measurement of the structure-borne vibration of rotating rolling bearings are addressed in the current edition of all parts of ISO 15242.Vibration of rotating rolling bearings can be assessed by a number of means using various types of transducers and measurement cond

37、itions. No simple set of values characterizing the vibration of a bearing is adequate for the evaluation of the vibratory performance in all possible applications. Ultimately, a knowledge of the type of bearing, its application and the purpose of the vibration measurement (e.g. as a manufacturing pr

38、ocess diagnostic or an assessment of the product quality) is required to select the most suitable method for measuring. The field of application for standards on bearing vibration is, therefore, not universal. However, certain methods have established a wide enough level of application to be conside

39、red as standard methods.This document serves to define the detailed method for assessing vibration of radial spherical and tapered roller bearings with cylindrical bore and outside surface on a measuring device. ISO 2017 All rights reserved vBS ISO 152423:2017Rolling bearings Measuring methods for v

40、ibration Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface1 ScopeThis document specifies vibration measuring methods for double-row radial spherical roller bearings and single-row and double-row radial tapered roller bearings, with cylindrical bore and ou

41、tside surface and a contact angle up to and including 45, under established measuring conditions.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition

42、 cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 286-2, Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and

43、shaftsISO 1132-1, Rolling bearings Tolerances Part 1: Terms and definitionsISO 2041, Mechanical vibration, shock and condition monitoring VocabularyISO 5593, Rolling bearings VocabularyISO 15242-1:2015, Rolling bearings Measuring methods for vibration Part 1: Fundamentals3 Terms and definitionsFor t

44、he purposes of this document, the terms and definitions given in ISO 1132-1, ISO 2041, ISO 5593 and ISO 15242-1 apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at h t t p :/ www .electropedia .org/ ISO Online brow

45、sing platform: available at h t t p :/ www .iso .org/ obp4 Measurement process4.1 Rotational frequencyThe default rotational frequency shall be 900 min1(15 s1), with a tolerance of +21%.Other rotational frequencies and tolerances may be used by agreement between the manufacturer and the customer, e.

46、g. it may be necessary to use a higher rotational frequency for bearings in the smaller size range in order to obtain an adequate vibration signal. Conversely, it may be necessary to use a lower rotational frequency for bearings in the larger size range to avoid possible roller, rib and raceway dama

47、ge.INTERNATIONAL STANDARD ISO 15242-3:2017(E) ISO 2017 All rights reserved 1BS ISO 152423:2017Rolling bearings Measuring methods for vibration Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface1 ScopeThis document specifies vibration measuring methods for

48、double-row radial spherical roller bearings and single-row and double-row radial tapered roller bearings, with cylindrical bore and outside surface and a contact angle up to and including 45, under established measuring conditions.2 Normative referencesThe following documents are referred to in the

49、text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 286-2, Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shaftsISO 1132-1, Rolling bearings Toler