BS EN 61280-2-3-2009 Fibre optic communication subsystem test procedures - Digital systems - Jitter and wander measurements《光纤通信子系统的试验程序 数字系统 抖动和漂移测量》.pdf

《BS EN 61280-2-3-2009 Fibre optic communication subsystem test procedures - Digital systems - Jitter and wander measurements《光纤通信子系统的试验程序 数字系统 抖动和漂移测量》.pdf》由会员分享，可在线阅读，更多相关《BS EN 61280-2-3-2009 Fibre optic communication subsystem test procedures - Digital systems - Jitter and wander measurements《光纤通信子系统的试验程序 数字系统 抖动和漂移测量》.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic communication subsystem test procedures Part 2-3: Digital systems Jitter and wander measurementsBS EN 61280-2-3:2009Incorporating corrigendum March 2010Licensed Copy:

2、 Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/08/2010 08:13, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 61280-2-3:2009, incorporating corrigendum March 2010. It is identical to IEC 61280-2-3:2009. It supersedes BS EN 61280-2-5:1998 which is withdraw

3、n.The UK participation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre optics, to Subcommittee GEL/86/3, Fibre optic systems andactive devices.A list of organizations represented on this subcommittee can be obtained onrequest to its secretary.This publication does not purport to

4、 include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 70898 5ICS 33.180.01Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPo

5、licy and Strategy Committee on 30 April 2010Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61280-2-3:200930 April 2010 Implementation of CENELEC corrigendum March 2010;Supersession information added to EN forewordLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STAN

6、DARDS, 03/08/2010 08:13, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 61280-2-3 NORME EUROPENNE EUROPISCHE NORM September 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Se

7、cretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61280-2-3:2009 E ICS 33.180.01 English version Fibre optic communication subsystem test procedures - Part 2-3: Digital systems - J

8、itter and wander measurements (IEC 61280-2-3:2009) Procdures dessai des sous-systmes de tlcommunications fibres optiques - Partie 2-3: Systmes numriques - Mesures des gigues et des drapages (CEI 61280-2-3:2009) Prfverfahren fr Lichtwellenleiter-Kommunikationsuntersysteme - Teil: 2-3: Digitale System

9、e - Messung von Jitter und Wander (IEC 61280-2-3:2009) This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard withou

10、t any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language

11、 made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmar

12、k, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61280-2-3:2009Incorporating corrigendum March 2010Lic

13、ensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/08/2010 08:13, Uncontrolled Copy, (c) BSIEN 61280-2-3:2009 - 2 - Foreword The text of document 86C/885/FDIS, future edition 1 of IEC 61280-2-3, prepared by SC 86C, Fibre optic systems and active devices, of IEC TC 86, Fibre optics, was submitted

14、 to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61280-2-3 on 2009-08-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-05-01 latest date by which th

15、e national standards conflicting with the EN have to be withdrawn (dow) 2012-08-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61280-2-3:2009 was approved by CENELEC as a European Standard without any modification. _ BS EN 61280-2-3:2009This do

16、cument supersedes EN 61280-2-5:1998. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/08/2010 08:13, Uncontrolled Copy, (c) BSI- 3 - EN 61280-2-3:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referen

17、ced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common mod

18、ifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60825-1 -1)Safety of laser products - Part 1: Equipment classification and requirements EN 60825-1 20072)ITU-T Recommendation G.813 -1)Timing characteristics of SDH equipment slave clocks (SEC) - - 1)Un

19、dated reference. 2)Valid edition at date of issue. BS EN 61280-2-3:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/08/2010 08:13, Uncontrolled Copy, (c) BSI 2 CONTENTS 1 Scope.7 1.1 Types of jitter measurements 7 1.2 Types of wander measurements 7 2 Normative references .7 3 Terms and

20、definitions .7 4 General considerations.11 4.1 Jitter generation 11 4.1.1 Timing jitter .11 4.1.2 Alignment jitter 11 4.1.3 Other effects12 4.2 Effects of jitter on signal quality.12 4.3 Jitter tolerance 12 4.4 Waiting time jitter 13 4.5 Wander .14 5 Jitter test procedures14 5.1 General consideratio

21、ns14 5.1.1 Analogue method 14 5.1.2 Digital method .14 5.2 Common test equipment15 5.3 Safety .16 5.4 Fibre optic connections .17 5.5 Test sample 17 6 Jitter tolerance measurement procedure.17 6.1 Purpose 17 6.2 Apparatus17 6.3 BER penalty technique 17 6.3.1 Equipment connection .17 6.3.2 Equipment

22、settings 18 6.3.3 Measurement procedure18 6.4 Onset of errors technique 18 6.4.1 Equipment connection .18 6.4.2 Equipment settings 19 6.4.3 Measurement procedure19 6.5 Jitter tolerance stressed eye receiver test .20 6.5.1 Purpose.20 6.5.2 Apparatus20 6.5.3 Sinusoidal jitter template technique .20 7

23、Measurement of jitter transfer function .21 7.1 General .21 7.2 Apparatus21 7.3 Basic technique.22 7.3.1 Equipment connection .22 7.3.2 Equipment settings 22 7.3.3 Measurement procedure22 7.4 Analogue phase detector technique.23 BS EN 61280-2-3:2009EN 61280-2-3:2009Licensed Copy: Wang Bin, ISO/EXCHA

24、NGE CHINA STANDARDS, 03/08/2010 08:13, Uncontrolled Copy, (c) BSI 3 7.4.1 Equipment connections23 7.4.2 Equipment settings 23 7.4.3 Measurement procedure24 7.4.4 Measurement calculations .24 8 Measurement of output jitter .24 8.1 General .24 8.2 Equipment connection .24 8.2.1 Equipment settings 24 8

25、.2.2 Measurement procedure24 8.2.3 Controlled data25 9 Measurement of systematic jitter 25 9.1 Apparatus25 9.2 Basic technique.25 9.2.1 Equipment connection .25 9.2.2 Equipment settings 26 9.2.3 Measurement procedure26 10 BERT scan technique .27 10.1 Apparatus29 10.2 Basic technique.29 10.2.1 Equipm

26、ent connection .29 10.2.2 Equipment settings 29 10.2.3 Measurement process .29 11 Jitter separation technique .30 11.1 Apparatus31 11.2 Equipment connections .31 11.3 Equipment settings31 11.4 Measurement procedure32 11.4.1 Sampling oscilloscope: 32 11.4.2 Real-time oscilloscope.32 12 Measurement of

27、 wander .33 12.1 Apparatus33 12.2 Basic technique.33 12.2.1 Equipment connection .33 12.2.2 Equipment settings 34 12.2.3 Measurement procedure35 13 Measurement of wander TDEV tolerance35 13.1 Intent.35 13.2 Apparatus35 13.3 Basic technique.35 13.4 Equipment connection .35 13.4.1 Wander TDEV toleranc

28、e measurement for the test signal of EUT 35 13.4.2 Wander TDEV tolerance measurement for timing reference signal of EUT.36 13.5 Equipment settings36 13.6 Measurement procedure37 14 Measurement of wander TDEV transfer 37 14.1 Apparatus37 14.2 Equipment connection .37 BS EN 61280-2-3:2009EN 61280-2-3:

29、2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/08/2010 08:13, Uncontrolled Copy, (c) BSI 4 14.2.1 Wander TDEV transfer measurement for the test signal of EUT.37 14.2.2 Wander TDEV transfer measurement for timing reference signal of EUT.37 14.3 Equipment settings38 14.4 Measurement pro

30、cedure38 15 Test results 38 15.1 Mandatory information.38 15.2 Available information.39 Bibliography40 Figure 1 Jitter generation.11 Figure 2 Example of jitter tolerance13 Figure 3 Jitter and wander generator .15 Figure 4 Jitter and wander measurement .16 Figure 5 Jitter stress generator 16 Figure 6

31、 Jitter tolerance measurement configuration: bit error ratio (BER) penalty technique18 Figure 7 Jitter tolerance measurement configuration: Onset of errors technique 19 Figure 8 Equipment configuration for stressed eye tolerance test.20 Figure 9 Measurement of jitter transfer function: basic techniq

32、ue.22 Figure 10 Measurement of Jitter transfer: analogue phase detector technique .23 Figure 11 Output jitter measurement25 Figure 12 Systematic jitter measurement configuration: basic technique 26 Figure 13 Measurement of the pattern-dependent phase sequence xi 27 Figure 14 BERT scan bathtub curves

33、 (solid line for low jitter, dashed line for high jitter).28 Figure 15 Equipment setup for the BERT scan.29 Figure 16 Dual Dirac jitter model31 Figure 17 Equipment setup for jitter separation measurement31 Figure 18 Measurement of time interval error.32 Figure 19 Synchronized wander measurement conf

34、iguration34 Figure 20 Non-synchronized wander measurement configuration.34 Figure 21 Wander TDEV tolerance measurement configuration for the test signal of EUT 36 Figure 22 Wander TDEV tolerance measurement configuration for the timing signal of EUT 36 Figure 23 Wander TDEV transfer measurement conf

35、iguration for the test signal of EUT 37 Figure 24 Wander TDEV transfer measurement configuration for the timing signal of EUT 38 BS EN 61280-2-3:2009EN 61280-2-3:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/08/2010 08:13, Uncontrolled Copy, (c) BSI 7 FIBRE OPTIC COMMUNICATION SUBSYS

36、TEM TEST PROCEDURES Part 2-3: Digital systems Jitter and wander measurements 1 Scope This part of IEC 61280 specifies methods for the measurement of the jitter and wander parameters associated with the transmission and handling of digital signals. 1.1 Types of jitter measurements This standard cover

37、s the measurement of the following types of jitter parameters: a) jitter tolerance 1) sinusoidal method 2) stressed eye method b) jitter transfer function c) output jitter d) systematic jitter e) jitter separation 1.2 Types of wander measurements This standard covers the measurement of the following

38、 types of wander parameters: a) non-synchronized wander b) TDEV tolerance c) TDEV transfer d) synchronized wander 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated refere

39、nces, the latest edition of the referenced document (including any amendments) applies. IEC 60825-1, Safety of laser products Part 1: Equipment classification and requirements ITU-T Recommendation G.813, Timing characteristics of SDH equipment slave clocks (SEC) 3 Terms and definitions For the purpo

40、ses of this document, the following terms and definitions apply. NOTE See also IEC 61931. BS EN 61280-2-3:2009EN 61280-2-3:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/08/2010 08:13, Uncontrolled Copy, (c) BSI 8 3.1 jitter the short-term, non-cumulative, variation in time of the sig

41、nificant instances of a digital signal from their ideal position in time. Short-term variations in this context are jitter components with a repetition frequency equal to or exceeding 10 Hz 3.2 jitter amplitude the deviation of the significant instance of a digital signal from its ideal position in

42、time NOTE For the purposes of this standard the jitter amplitude is expressed in terms of the unit interval (UI). It is recognized that jitter amplitude may also be expressed in units of time. 3.3 unit interval (UI) the shortest interval between two equivalent instances in ideal positions in time. I

43、n practice this is equivalent to the ideal timing period of the digital signal 3.4 jitter frequency the rate of variation in time of the significant instances of a digital signal relative to their ideal position in time. Jitter frequency is expressed in Hertz (Hz) 3.5 jitter bandwidth the jitter fre

44、quency at which the jitter amplitude has decreased by 3dB relative to its maximum value 3.6 alignment jitter jitter created when the timing of a data signal is recovered from the signal itself 3.7 timing jitter jitter present on a timing source 3.8 systematic jitter jitter components which are not r

45、andom and have a predictable rate of occurrence. Systematic jitter in a digital signal results from regularly recurring features in the digital signal, such as frame alignment data, and justification control data. This is sometimes referred to as deterministic jitter and is composed of periodic unco

46、rrelated jitter and data dependent jitter 3.9 periodic uncorrelated jitter a form of systematic jitter that occurs at a regular rate, but is uncorrelated to the data when the data pattern repeats. Periodic uncorrelated jitter will be the same independent of which edge in a pattern is observed over t

47、ime. Sources of periodic uncorrelated jitter include switching power supplies phase modulating reference clocks or any form of periodic phase modulation of clocks that control data rates 3.10 inter-symbol interference jitter caused by bandwidth limitations in transmission channels. If the channel ba

48、ndwidth is low, signal transitions may not reach full amplitude before transitioning to a different logic state. Starting at a level closer to the midpoint between logic states, the time at which the signal edge then crosses a specific amplitude threshold can be early compared to consecutive identic

49、al digits which have reached full amplitude and then switch to the other logic state BS EN 61280-2-3:2009EN 61280-2-3:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/08/2010 08:13, Uncontrolled Copy, (c) BSI 9 3.11 duty cycle distortion occurs when the duration of a logic 1 (0-1-0) is different from the duration of a logic 0 (1-0-1). For example, if the logic 1 has a longer duration, rising edges will occur early relative to falling edges, compared