BS EN 12427-2000 Industrial commercial and garage doors and gates - Air permeability - Test method《工业、商业和汽车库门 透气率 试验方法》.pdf

《BS EN 12427-2000 Industrial commercial and garage doors and gates - Air permeability - Test method《工业、商业和汽车库门 透气率 试验方法》.pdf》由会员分享，可在线阅读，更多相关《BS EN 12427-2000 Industrial commercial and garage doors and gates - Air permeability - Test method《工业、商业和汽车库门 透气率 试验方法》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 12427:2000 The Euro

2、pean Standard EN 12427:2000 has the status of a British Standard ICS 91.060.50 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Industrial,commercial and garage doors and gates Air permeability Test methodThis British Standard, having been prepared under the direction of the Se

3、ctor Committee for Building and Civil Engineering, was published under the authority of the Standards Committee and comes into effect on 15 October 2000 BSI 10-2000 ISBN 0 580 36539 5 BS EN 12427:2000 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard

4、is the official English language version of EN 12427:2000. The UK participation in its preparation was entrusted by Technical Committee B/538, Doors, windows, shutters, hardware and curtain walling, to Subcommittee B/538/5, Industrial, commercial and garage doors and gates, which has the responsibil

5、ity to: aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations

6、 represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Co

7、rrespondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does

8、 not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.EUROPEANSTANDARD NOR

9、MEEUROPENNE EUROPISCHENORM EN12427 July2000 ICS91.060.50 Englishversion Industrial,commercialandgaragedoorsandgatesAir permeabilityTestmethod Portesquipantleslocauxindustriels,commerciauxetles garagesPermabilitlairMthodedessai ToreLuftdurchlssigkeitPrfverfahren ThisEuropeanStandardwasapprovedbyCENon

10、19July2000. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecret

11、ariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandard

12、sbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG CentralSecretariat:ruedeSta

13、ssart,36B1050Brussels 2000CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN12427:2000EPage2 EN12427:2000 Contents Page Foreword 2 1 Scope 3 2 NormativeReferences 3 3 Termsanddefinitions 4 4 Principleoftest 4 5 Apparatus 4 6 Preparationoftestspecimen

14、4 7 Testprocedure 5 8 Testreport 6 AnnexA(normative)Airpressuresequencefortestrig 7 Foreword ThisEuropeanStandardhasbeenpreparedbyTechnicalCommitteeCEN/TC33“Doors, windows,shutters,buildinghardwareandcurtainwalling“,thesecretariatofwhichisheldby AFNOR. ThisEuropeanStandardshallbegiventhestatusofanat

15、ionalstandard,eitherbypublication ofanidenticaltextorbyendorsement,atthelatestbyJanuary2001,andconflictingnational standardsshallbewithdrawnatthelatestbyJanuary2001. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsof thefollowingcountriesareboundtoimplementthisEuropeanS

16、tandard:Austria,Belgium, CzechRepublic,Denmark,Finland,France,Germany,Greece,Iceland,Ireland,Italy,Luxem bourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandtheUnitedKingdom. NoexistingENstandardissuperseded. Thisstandardisoneofaseriesofteststandardsidentifiedwithintheproductstandard prEN13

17、241:1998. EuropeanStandardsaswellasrelevantnationalregulationsandstandardswillenablethe actualexposurelevelstobedeterminedfortheindividuallocationsoftheproducts. AnnexAisnormative.Page3 EN12427:2000 ThisstandardhasbeendraftedonbasisofEN12114“ThermalperformanceofbuildingAir permeabilityofbuildingcomp

18、onentsandbuildingelementsLaboratorytestmethod”. 1 Scope 1.1 General ThisEuropeanStandardspecifiesatestmethodfordeterminingtheairpermeabilityfordoors inaclosedposition. Thedoorsareintendedforinstallationinareasinthereachofpeople,forwhichthemainin tendedusesaregivingsafeaccessforgoods,vehiclesandperso

19、nsinindustrial,commercial orresidentialpremises. Thedoorsmaybemanuallyorpoweroperated. ThisdocumentappliestoalldoorsprovidedinaccordancewithprEN13241:1998. 1.2 Exclusions Itdoesnotapplyto: lockgatesanddockgates; doorsonlifts; doorsonvehicles; armoureddoors; doorsmainlyfortheretentionofanimals; theat

20、retextilecurtains; horizontallymovingdoorslessthan2,5mwideand6,25m 2 area,designedprincipallyfor pedestrianuse; revolvingdoorsofanysize; doorsoutsidethereachofpeople(suchascranegantryfences); railwaybarriers; barriersusedsolelyforvehicles. 2 NormativeReferences ThisEuropeanStandardincorporatesbydate

21、dorundatedreference,provisionsfromother publications.Thesenormativereferencesarecitedattheappropriateplacesinthetextand thepublicationsarelistedhereafter.Fordatedreferencessubsequentamendmentstoorrevi sionsofanyofthesepublicationsapplytothisEuropeanStandardonlywhenincorporatedin itbyamendmentorrevis

22、ion.Forundatedreferencesthelatesteditionofthepublicationre ferredtoapplies. EN124331 Industrial,commercialandgaragedoorsandgates TerminologyPart1:Typesofdoors EN124332 Industrial,commercialandgaragedoorsandgates TerminologyPart2:Partsofdoors EN12426 Industrial,commercialandgaragedoorsandgates Airper

23、meabilityClassificationPage4 EN12427:2000 prEN13241:1998 Industrial,commercialandgaragedoorsandgates Productstandard 3 Termsanddefinitions ForthepurposeofthisstandardthetermsanddefinitionsinEN124331andEN124332 apply.Inadditionthefollowingdefinitionsalsoapply: 3.1 Airpermeability:abilityofatestspecim

24、eninrelationtotheoverallarea,whenin closedposition,toallowairflow,expressedinm 3 /m 2 h. 3.2 Overallarea:theareaofthestructuralopeningofthespecimen,expressedin squaremeters(m 2 ). 4 Principleoftest Applicationofairpressure(positiveornegative)ontheexternalorinternalsurfaceofthetest specimenwhilstamea

25、surementoftheairflowismadewithadeviceaccordingto5c). 5 Apparatus Thebasictestapparatusshallinclude: a) anopeningtowhichthetestspecimencanbefitted,tosimulatethestructuralopen ingoftheproductonsite. b) device(s)toprovidecontrolledairpressure,aboveatmosphericairpressure,tothe exposedsurfaceofthespecime

26、n. c) device(s)tomeasuretheamountofairflowwithanaccuracyof+5%.Itshallbecali bratedsoastogiveairflowinnormalconditions(20C,101kPa). d) device(s)formeasuringairpressurewithanaccuracyof+5%. e) ameansofsealingalljointsofthespecimenwhenrequired. NOTEThetestrigshouldnotbedesignedtoincreasetheperformanceof

27、the specimen. Thetestrigshallbepreparedsothatitisabletowithstandthepressuresappliedduringthe test,withoutdeflectingtoanextentlikelytoimpairjointingortoimposebendingstresses. 6 Preparationoftestspecimen a) Thetestspecimenshallbeinstalledinaccordancewiththemanufacturersstandard orpublishedinstallation

28、instructions. b) Thetestspecimenshallconsistofparts,whichindetailconformtotheproduction levelofquality.Wheneverpossiblethetestspecimenshouldbenewlymade.Doors andpartsinstockaretoberegardedasnewlymadeiftheyfullycomplywiththe specificationoftherunningproduction.Page5 EN12427:2000 c) Thetestspecimensha

29、llbecleanandthesurfacesdry. d) Anyventilation,drainageor“weepholes“shallbetapeduporleftopenaccordingto thepurposeoftestandthispurposeandstateshallbenotedandrecorded.Inmost cases,aircanpassthroughbothfixedandopeningjoints. e) Minimumdimensionsofspecimenseetable1. Table1Minimumdimensionsofspecimen Com

30、mercialandgaragedoors Width: 2000mm Height: 2000mm Industrialdoors Width: 3500mm Height: 3000mm 7 Testprocedure 7.1 Preliminaries Thetestspecimenshallbeconditionedforatleast4hwithintherange10Cto30Cand25% to75%relativehumiditiesimmediatelybeforetesting. Temperatureshallbemeasuredwithin+3C. Atmospheri

31、cpressureshallbemeasuredwithin+1kPa. Thepressureshallbeappliedupto50Pa. 7.2 Procedure Theresidualairpermeabilityshallbemeasuredpriortothespecimentest. ThediagramsofpressuresequencesgiveninAnnexAmaybehelpfulforaclearunder standing. 7.2.1 Airpermeabilitywithpositivepressureshallbecarriedoutfirst. Nega

32、tivepressureshallbecarriedoutonlyifrequired. 7.2.2 Airpermeabilityofspecimenfittedtothetestrigshallbemeasured. 7.2.3 Thetestspecimenshallbeopenedandclosedatleastoncebeforefinallysecuredin theclosedposition. 7.2.4 Applythreeairpressurepulses,topositiontheseals,therateofapplicationbeing overaperiodofn

33、otlessthanonesecond.Maintaineachpulseforatleastthreeseconds. Thesepulsesshallproduceapressure10%greaterthanthemaximumpressure P max required forthetest. 7.2.5 Theairpressureinthetestrigisthenraisedupto50Pa. Thedurationshouldbesuchthatairpressureinthetestrigisadequatelystabilisedbefore readingthevalu

34、elinkedtoairpermeability.Page6 EN12427:2000 7.2.6 Calculatetheairpermeabilityaccordingtotheformula: 2 3 3 m /h m /h m opening Structural leakage air Residual leakage Air 8 Testreport Thetestreportshallstatethedevicesusedforthetestandalsorecordthelocationofanyair leakageobserved,onadrawingoraphotogra

35、phofthetestspecimen. Thereportshallcontainasaminimumthefollowinginformation: a) dateofthetestreport; b) referencetothisstandard; c) nameoftheapprovedlaboratory,ifapplicable; d) allnecessaryreferencestoidentifythespecimen; e) allrelevantdetailsconcerningthedimensionsofthespecimen,itsmaterials,design,

36、con structionandmanufactureanditsfinishedsurfaceandfittingsandalsoitsmethodofde livery; f) drawingsofdetailsofthespecimenshallbeofasuitablescale; g) identificationofthetestequipment; h) testmethod; i) testprocedures,includingstorageandconditioningpriortotestandmountingthespeci menreadyfortest; j) te

37、stclimatesused; k) locationofairleakage,ifdetectable; l) taketheoverallarea(m 2 )intoaccountwhentocalculatethespecificairflowinm 3 /m 2 h (see3.2); m) airpermeabilityresult; n) summarywithobservations; o) determinetheclassificationaccordingtoEN12426; p) signatureoftheresponsibleperson.Page7 EN12427:

38、2000 AnnexA(normative) Airpressuresequencefortestrig 1 Key Openingandclosingoperation 1 Stabilizedpressure 3s 1sBS EN 12427:2000 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

39、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the in

40、ternational level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services

41、. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individ

42、ual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response

43、to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its

44、 Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds