ASTM E1547-1999(2003) Standard Terminology Relating to Industrial and Specialty Chemicals《工业和特别化学品的相关标准术语》.pdf

《ASTM E1547-1999(2003) Standard Terminology Relating to Industrial and Specialty Chemicals《工业和特别化学品的相关标准术语》.pdf》由会员分享，可在线阅读，更多相关《ASTM E1547-1999(2003) Standard Terminology Relating to Industrial and Specialty Chemicals《工业和特别化学品的相关标准术语》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: E 1547 99 (Reapproved 2003)Standard Terminology Relating toIndustrial and Specialty Chemicals1This standard is issued under the fixed designation E 1547; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last

2、 revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This standard covers terminology relating to industrialand specialty chemicals. It is intended to provide an under-standi

3、ng of terms commonly used in test methods, practices,and specifications throughout the industry.NOTE 1The boldface numbers following each definition refer to E15standards in which the definition appears. Lightface numbers refer to theE15 subcommittee having jurisdiction.2. Referenced Documents2.1 AS

4、TM Standards:2D 891 Test Methods for Specific Gravity, Apparent, ofLiquid Industrial ChemicalsE 70 Test Method for pH of Aqueous Solutions With theGlass ElectrodeE 180 Practice for Determining the Precision of ASTMMethods for Analysis and Testing of Industrial ChemicalsE 200 Practice for Preparation

5、, Standardization, and Stor-age of Standard and Reagent Solutions for ChemicalAnalysisE 201 Test Method for Calculation of Volume and Weight ofIndustrial Chemical LiquidsE 222 Test Methods for Hydroxyl Groups by Acetic Anhy-dride AcetylationE 223 Test Method for Analysis of Sulfuric AcidE 224 Test M

6、ethods for Analysis of Hydrochloric AcidsE 234 Test Method for Total Bromine Number of Unsatur-ated Aliphatic ChemicalsE 300 Practice for Sampling Industrial ChemicalsE 324 Test Method for Relative Initial and Final MeltingPoints and the Melting Range of Organic ChemicalsE 326 Test Method for Hydrox

7、yl Groups by Phthalic Anhy-dride EsterificationE 335 Test Method for Hydroxyl Groups by PyromelliticDianhydride EsterificationE 347 Test Method for Ash in Polybasic AcidsE 410 Test Method for Moisture and Residue in LiquidChlorineE 1899 Test Method for Hydroxyl Groups Using Reactionwith p-Toluenesul

8、fonyl Isocyanate (TSI) and Titration withTetrabutylammonium Hydroxide3. Terminology3.1 Definitions:accuracythe agreement between an experimentally deter-mined value and the accepted reference value. In chemicalwork, this term is frequently used to express freedom frombias, but in other fields it ass

9、umes a broader meaning as ajoint index of precision and bias. To avoid confusion, theterm bias will be used in appraising the systematic error oftest methods for industrial chemicals. See also bias.E 180, E15.04ashthe residual inorganic matter obtained on ignition of asample in air at a specified te

10、mperature. E 347, E15.51Baum gravitya unit of density based on specific gravityand defined by the following equation:Baum gravity 5 145 2145/sp gr# at 15.5/15.5C 60/60F! (1)See also density and specific gravity. E 223, E 224,E 324, E15.51biasa constant or systematic error as opposed to a randomerror

11、. It manifests itself as a persistent positive or negativedeviation of the method average from the accepted referencevalue. See also accuracy. E 180, E15.04bromine number, totalnumber of centigrams of bromineequivalent to the total unsaturation present in1gofsample.It is a measure of the total ethyl

12、enic unsaturation present inthe designated aliphatic compound. E 234, E15.22coefficient of variationa measure of relative precisioncalculated as the standard deviation of a series of valuesdivided by their average. It is often multiplied by 100 andexpressed as a percentage. E 180, E15.04densitythe m

13、ass of a unit volume of a material at a specifiedtemperature. The units shall be stated, such as grams permillilitre, grams per cubic centimetre, pounds per cubic foot,or other. The form of the expression shall be the following:Density at x .1This terminology is under the jurisdiction of ASTM Commit

14、tee E15 onIndustrial and Specialty Chemicals and is the direct responsibility of SubcommitteeE15.01 on General Standards.Current edition approved Sept. 10, 1999. Published December 1999. Originallypublished as E 1547 93. Last previous edition E 1547 93.2For referenced ASTM standards, visit the ASTM

15、website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United

16、States.where x = temperature of the material. See also Baumgravity and specific gravity. E 201, E15.23density (of gases)the mass of a unit volume of a gas at astated temperature and pressure. The units shall be stated.The form of expression shall be the following:Density at x, ywhere:x = temperature

17、 of the gas, andy = pressure of the gas. E 12, E15.23density, apparentthe weight in air of a unit volume of amaterial at a specified temperature. The units shall be stated.The form of expression shall be the following:Apparent density at xwhere x = temperature of the material. E 201, E15.23duplicate

18、stwo independent determinations performed byone analyst at essentially the same time. E 180, E15.04errorin a statistical sense, any deviation of an observedvalue from the true, but generally unknown, value. Whenexpressed as a fraction or percentage of the value measured,it is called a relative error

19、. All statements of precision or biasshould indicate clearly whether they are expressed in abso-lute or relative sense. E 180, E15.04error, randomthe chance variation encountered in all ex-perimental work despite the closest possible control ofvariables. It is characterized by the random occurrence

20、ofboth positive and negative deviations from the mean valuefor the method, the algebraic average of which will approachzero in a long series of measurements. E 180, E15.04hydroxyl numberthe milligrams of potassium hydroxideequivalent to the hydroxyl content of1gofsample. In thecase of a pure compoun

21、d, the hydroxyl number is inverselyproportional to the hydroxyl equivalent weight:equivalent weight g/equivalent!556100/hydroxyl number (2)E 222, E 326, E 335, E 1889, E15.22increments (solid sample)portions of material selectedfrom various parts of a lot, which may be tested individuallyor composit

22、ed and tested as a unit. E 300, E15.05lot (solid sample)a discrete quantity of material. It maycontain a single batch or several batches or be the product ofcontinuous process broken into units on the basis of time orshipment. It is very desirable that individual batches in a lotbe specifically iden

23、tified so that they may become individualor stratified units for inspection. E 300, E15.05melting point, finalthe temperature at which the last crystaldisappears into the melt. E 324, E15.23melting point, initialthe temperature at which positiveevidence of liquefaction is observed. E 324, E15.23mois

24、turethe volatile substances evolved during volatiliza-tion and purging of the sample-residue flask and absorbed onthe desiccant contained in the absorption tubes under theconditions of the test.3E 410, E15.5795 % limit (difference between two results)the maximumabsolute difference expected for appro

25、ximately 95 % of allpairs of results from laboratories similar to those in theinterlaboratory study. E 180, E15.04pHdefined formally as the negative logarithm to the base 10of the conventional hydrogen ion activity. The pH of anaqueous solution is derived from E, the electromotive force(emf) of the

26、cell:reference | | solution | glass electrode(where the double vertical line represents a liquid junction)when the electrodes are immersed in the solution, and Es,the electromotive force obtained when the electrodes areimmersed in a standard solution (whose assigned pH isdesignated pH(S), by the fol

27、lowing equation:pH 5 pHS!1E 2 Es!FRT ln 10!(3)where:F = faraday, 96 487 Cmol1,R = gas constant, 8.314 33 JK1mol1, andT = absolute temperature, (t C + 273.15). E 70, E15.23precisionthe degree of agreement of repeated measurementsof the same property. Precision statements in ASTM meth-ods for industri

28、al chemicals will be derived from theestimated standard deviation or coefficient of variation of aseries of measurements and will be expressed in terms of therepeatability, the within-laboratory, between days variability,and the reproducibility of the method. E 180, E15.04rangethe absolute value of

29、the algebraic difference betweenthe highest and the lowest values in a set of data. E 180,E15.04repeatabilitythe precision of a method expressed as theagreement attainable between independent determinationsperformed at essentially the same time (duplicates) by oneanalyst using the same apparatus and

30、 techniques. E 180,E15.04replicatestwo or more repetitions of a test determination.E 180, E15.04reproducibilitythe precision of a method expressed as theagreement attainable between determinations performed indifferent laboratories. E 180, E15.04residuethose substances that remain in the sample flas

31、k aftersample volatilization under the conditions of the test.3E 410, E15.57resulta value, that is, a single determination, an average ofduplicates, or other specified grouping of replicates, ob-tained by carrying out the test method. E 180, E15.04sample, all-levels (liquid sample)one obtained by su

32、bmerg-ing a closed sampler to a point as near as possible to thedraw-off level, then opening the sampler and raising it at arate such that it is about three-fourths full as it emerges fromthe liquid. An all-levels sample is not necessarily an averagesample because the tank volume may not be proporti

33、onal tothe depth and because the operator may not be able to raisethe sampler at the variable rate required for proportionatefilling. The rate of filling is proportional to the square root ofthe depth of immersion. E 300, E15.05sample, average (liquid sample)one that consists of pro-portionate parts

34、 from all sections of the container. E 300,E15.053This term or definition is specific to the standard under the test conditions.E 1547 99 (2003)2sample, bottom (liquid sample)one obtained from thematerial on the bottom surface of the tank, container, or lineat its lowest point. (Bottom samples are u

35、sually taken tocheck for water, sludge, scale, etc.) E 300, E15.05sample, composite, compartment-tank (liquid sample)(ship, barge, etc.)a blend of individual all-levels samplesfrom each compartment that contains the product beingsampled in proportion to the volume of material in eachcompartment. E 3

36、00, E15.05sample, composite, single-tank (liquid sample)a blend ofthe upper, middle, and lower samples. For a tank of uniformcross section, such as an upright cylindrical tank, the blendconsists of equal parts of the three samples. For a horizontalcylindrical tank, the blend consists of the three sa

37、mples inthe proportions shown in Table 1. E 300, E15.05sample, continuous (liquid sample)one obtained from apipeline conveying the product in such a manner as to givea representative average of the stream throughout the periodof transit. E 300, E15.05sample, drain (liquid sample)one obtained from th

38、edraw-off or discharge valve. Occasionally, a drain samplemay be the same as a bottom sample, as in the case of a tankcar. E 300, E15.05sample, gross (solid sample)a composite prepared by mix-ing the increments. E 300, E15.05sample, jar (liquid sample)one obtained by placing a jarinto the path of a

39、free-flowing stream so as to collect adefinite volume from the full cross section of the stream.E 300, E15.05sample, laboratory (solid sample)that portion of the sub-sample that is sent to the laboratory for testing. E 300,E15.05sample, middle (liquid sample)one obtained from themiddle of the tank c

40、ontents. E 300, E15.05sample, mixed (liquid sample)one obtained after mixing orvigorously stirring the contents of the original container, andthen pouring out or drawing off the quantity desired.E 300, E15.05sample, outlet (liquid sample)one normally obtained at thelevel of the tank outlet (either f

41、ixed or a swing line outlet).E 300, E15.05sample, sub (solid sample)a smaller sample produced in aspecified manner by the reduction in volume or quantity ofthe gross sample. E 300, E15.05sample, top (liquid sample)one normally obtained 6 in.(152 mm) below the top surface of the tank contents.E 300,

42、E15.05sample, tube or thief (liquid sample)one obtained with asampling tube or special thief, either as a core sample or spotsample from the specified point in the container. E 300,E15.05sample, upper (liquid sample)one obtained from themiddle of the upper third of the tank contents. E 300,E15.05sam

43、pling (solid sample)the process of extracting a smallfraction of material from a larger bulk, so that it will besufficiently representative of the bulk for the intendedpurpose. E 300, E15.05significance levelthe decimal probability that a result willexceed the critical value. E 180, E15.04simple liq

44、uida single-phase liquid having a vapor pressureof less than 16 psi Reid vapor pressure at 100F (830 mm Hgat 37.8C) and a Saybolt viscosity of less than 10 000 s(2160 cSt) at 25C. E 300, E15.05slurrya suspension of solid particles in a liquid that can beseparated by filtration or sedimentation (does

45、 not includeemulsions). E 300, E15.05solida state of matter in which the relative motion ofmolecules is restricted and in which molecules tend to retaina definite fixed position relative to each other. A solid may besaid to have a definite shape and volume. E 300, E15.05specific gravitythe ratio of

46、the mass of a unit volume of amaterial at a stated temperature to the mass of the samevolume of gas-free distilled water at a stated temperature.The form of expression shall be the following:Specific gravity x/y C.where:x = temperature of the material, andy = temperature of the water.See also Baum g

47、ravity and density. E 201, E15.23specific gravity (of solids and liquids)the ratio of the massof a unit volume of a material at a stated temperature to themass of the same volume of gas-free distilled water at astated temperature. If the material is a solid, the volume shallbe that of the impermeabl

48、e portion. The form of expressionshall be the following:Specific gravity x/y Cwhere:TABLE 1 Sampling Horizontal Cylindrical TanksLiquid Depth, Percentof DiameterSampling Level, Percent of Diameter Above Bottom Composite Sample, Proportionate Parts ofUpper Middle Lower Upper Middle Lower100 80 50 20

49、3 4 390 75 50 20 3 4 380 70 50 20 2 5 370 . 50 20 1 5 460 . 50 20 . 5 550 . 40 20 . 4 640 . . 20 . . 1030 . . 15 . . 1020 . . 10 . . 1010 . . 5 . . 10E 1547 99 (2003)3x = temperature of the material, andy = temperature of the water. E 12, E15.23specific gravity, apparent (of solids and liquids)the ratioof the weight in air of a unit volume of a material at a statedtemperature to the weight in air of equal density of an equalvolume of gas-free distilled water at a stated temperature. Ifthe material is a