ASTM D6469-2014 red 1514 Standard Guide for Microbial Contamination in Fuels and Fuel Systems《燃油和燃油系统微生物污染的标准指南》.pdf

《ASTM D6469-2014 red 1514 Standard Guide for Microbial Contamination in Fuels and Fuel Systems《燃油和燃油系统微生物污染的标准指南》.pdf》由会员分享，可在线阅读，更多相关《ASTM D6469-2014 red 1514 Standard Guide for Microbial Contamination in Fuels and Fuel Systems《燃油和燃油系统微生物污染的标准指南》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: D6469 12D6469 14Standard Guide forMicrobial Contamination in Fuels and Fuel Systems1This standard is issued under the fixed designation D6469; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision.

2、A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope*1.1 This guide provides personnel who have a limited microbiological background with an understanding of the symptoms,occurrence, and co

3、nsequences of chronic microbial contamination. The guide also suggests means for detection and control ofmicrobial contamination in fuels and fuel systems. This guide applies primarily to gasoline, aviation, boiler, industrial gas turbine,diesel, marine, furnace fuels and blend stocks (see Specifica

4、tions D396, D910, D975, D1655, D2069, D2880, D3699, D4814,D6227, and D6751), and fuel systems. However, the principles discussed herein also apply generally to crude oil and all liquidpetroleum fuels. ASTM Manual 472 provides a more detailed treatment of the concepts introduced in this guide; it als

5、o providesa compilation of all of the standards referenced herein that are not found in the Annual Book of ASTM Standards, Section Five onPetroleum Products and Lubricants.1.2 This guide is not a compilation of all of the concepts and terminology used by microbiologists, but it does provide a genera

6、lunderstanding of microbial fuel contamination.1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibi

7、lityof the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatorylimitations prior to use.2. Referenced Documents2.1 ASTM Standards:3D130 Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip TestD396 Specifi

8、cation for Fuel OilsD445 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)D515 Test Method for Phosphorus In Water (Withdrawn 1997)4D664 Test Method for Acid Number of Petroleum Products by Potentiometric TitrationD888 Test Methods for Disso

9、lved Oxygen in WaterD910 Specification for Aviation GasolinesD974 Test Method for Acid and Base Number by Color-Indicator TitrationD975 Specification for Diesel Fuel OilsD1067 Test Methods for Acidity or Alkalinity of WaterD1126 Test Method for Hardness in WaterD1293 Test Methods for pH of WaterD129

10、8 Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products byHydrometer MethodD1331 Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active AgentsD1426 Test Methods for Ammonia Nitrogen In WaterD1655 Specification for Aviation

11、 Turbine FuelsD1744 Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent1 This guide is under the jurisdiction of ASTM Committee D02 on Petroleum Products, Liquid Fuels, and Lubricants and is the direct responsibility of SubcommitteeD02.14 on Stability and Clea

12、nliness of Liquid Fuels.Current edition approved Nov. 1, 2012Oct. 1, 2014. Published February 2013October 2014. Originally approved in 1999. Last previous edition approved in 20112012 asD6469 11.D6469 12. DOI: 10.1520/D6469-12.10.1520/D6469-14.2 MNL 47, Fuel and Fuel System Microbiology: Fundamental

13、s, Diagnosis, and Contamination Control, Passman, F. J., ed., ASTM International, 2003.3 For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at serviceastm.org. For Annual Book of ASTM Standardsvolume information, refer to the standards Document Summary

14、 page on the ASTM website.4 The last approved version of this historical standard is referenced on www.astm.org.This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Becauseit may not b

15、e technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current versionof the standard as published by ASTM is to be considered the official document.*A Summary of Changes section appears at the end o

16、f this standardCopyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States1D1976 Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission SpectroscopyD2068 Test Method for Determining Filter Blocking TendencyD2069 Spe

17、cification for Marine Fuels (Withdrawn 2003)4D2274 Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)D2276 Test Method for Particulate Contaminant in Aviation Fuel by Line SamplingD2880 Specification for Gas Turbine Fuel OilsD3240 Test Method for Undissolved Water In Avi

18、ation Turbine FuelsD3241 Test Method for Thermal Oxidation Stability of Aviation Turbine FuelsD3242 Test Method for Acidity in Aviation Turbine FuelD3325 Practice for Preservation of Waterborne Oil SamplesD3326 Practice for Preparation of Samples for Identification of Waterborne OilsD3328 Test Metho

19、ds for Comparison of Waterborne Petroleum Oils by Gas ChromatographyD3414 Test Method for Comparison of Waterborne Petroleum Oils by Infrared SpectroscopyD3699 Specification for KerosineD3867 Test Methods for Nitrite-Nitrate in WaterD3870 Practice for Establishing Performance Characteristics for Col

20、ony Counting Methods in Microbiology (Withdrawn 2000)4D4012 Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in WaterD4057 Practice for Manual Sampling of Petroleum and Petroleum ProductsD4176 Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual

21、Inspection Procedures)D4412 Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed DepositsD4418 Practice for Receipt, Storage, and Handling of Fuels for Gas TurbinesD4454 Test Method for Simultaneous Enumeration of Total and Respiring Bacteria in Aquatic Systems by MicroscopyD4814 Spe

22、cification for Automotive Spark-Ignition Engine FuelD4840 Guide for Sample Chain-of-Custody ProceduresD4860 Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright NumericalRating)D4870 Test Method for Determination of Total Sediment in Residual FuelsD49

23、52 Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)D5304 Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen OverpressureD5452 Test Method for Particulate Contamination in Aviation Fuels by Laboratory FiltrationD6217 Test Met

24、hod for Particulate Contamination in Middle Distillate Fuels by Laboratory FiltrationD6227 Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon ComponentD6426 Test Method for Determining Filterability of Middle Distillate Fuel OilsD6751 Specification for Biodiesel Fuel Blend Sto

25、ck (B100) for Middle Distillate FuelsD6974 Practice for Enumeration of Viable Bacteria and Fungi in Liquid FuelsFiltration and Culture ProceduresD7463 Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and FuelAssociated WaterD7464 Practice for Manua

26、l Sampling of Liquid Fuels, Associated Materials and Fuel System Components for MicrobiologicalTestingE177 Practice for Use of the Terms Precision and Bias in ASTM Test MethodsE1259 Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390CE1326 Guide for Evaluating Nonconventional

27、 Microbiological Tests Used for Enumerating Bacteria2.2 Energy Institute Standards:5IP 385 Determination of the viable aerobic microbial content of fuels and fuel components boiling below 390C - Filtration andculture methodIP 472 Determination of fungal fragment content of fuels boiling below 390C2.

28、3 Government Standards:640 CFR 152 Pesticide Registration and Classification Procedures2.4 Other Standards:Test Method 2540D Total Suspended Solids Dried at 103105C798/8/EC Biocidal Products Directive8TPC Publication No. 3 The role of bacteria in the corrosion of oil field equipment95 Available from

29、 Energy Institute, 61 New Cavendish St., London, WIG 7AR, U.K6 Available from U.S. Government Printing Office, Superintendent of Documents, 732 N. Capitol St., NW, Mail Stop: SDE, Washington, DC 20401.7 Available from American Public Health Association, 800 I Street, NW Washington, DC 20001.8 Offici

30、al Journal of the European Communities, 24.4.98, L123/163(1998).9 Available from NACE International (NACE), 1440 South Creek Dr., Houston, TX 77084-4906, http:/www.nace.org.D6469 1423. Terminology3.1 Definitions:3.1.1 aerobe, nan organism that requires oxygen to remain metabolically active.3.1.1.1 D

31、iscussionAerobes use oxygen as their terminal electron acceptor in their primary energy-generating metabolic pathways. Aerobes requireoxygen for survival, using aerobic metabolic processes to generate energy for growth and survival.3.1.2 aggressiveness index (A.I.), nthe value computed from the sum

32、of the pH + log alkalinity + log hardness of water samplewhere both alkalinity and hardness are reported as milligram CaCO3L.3.1.2.1 DiscussionAs A.I. decreases, water becomes more corrosive. At A.I. 12, water is noncorrosive. At 10 A.I. 13.0. 13.0. Potential food sources rangefrom single carbon mol

33、ecules (carbon dioxide and methane) to complex polymers, including plastics. Oxygen requirements rangefrom obligate anaerobes, which die on contact with oxygen, to obligate aerobes, which die if oxygen pressure falls below a speciesspecific threshold.3.1.7 bioburden, nthe level of microbial contamin

34、ation (biomass) in a system.3.1.7.1 DiscussionTypically, bioburden is defined in terms of either biomass or numbers of cells per unit volume or mass or surface area materialtested (g biomass / mL; g biomass / g; cells / mLbiomass/mL; g biomass/g; cells/mLsample, and so forth). The specific parameter

35、used to define bioburden depends on critical properties of the system evaluated and the investigators preferences.3.1.8 biocide, na poisonous substance that can kill living organisms.3.1.8.1 DiscussionBiocides are further classified as bactericides (kill bacteria), fungicides (kill fungi), and micro

36、biocides (kill both bacterial andfungi). They are also referred to as antimicrobials.3.1.9 biodeterioration, nthe loss of commercial value or performance characteristics, or both, of a product (fuel) or material(fuel system) through biological processes.3.1.10 biofilm, na film or layer of microorgan

37、isms, biopolymers, water, and entrained organic and inorganic debris that formsas a result of microbial growth and proliferation at phase interfaces (liquid-liquid, liquid-solid, liquid-gas, and so forth) (synonym:skinnogen layer).D6469 1433.1.11 biomass, nbiological material including any material

38、other than fossil fuels which is or was a living organism orcomponent or product of a living organism.3.1.11.1 DiscussionIn biology and environmental science, biomass is typically expressed as density of biological material per unit sample volume,area, or mass (g biomass / g (or / mL or / cmbiomass/

39、g (or /mL or /cm2) sample); when used for products derived from organismsbiomass is typically expressed in terms of mass (kg, MT, etc.) or volume (L, m3, bbl, etc.).3.1.11.2 DiscussionProducts of living organisms include those materials produced directly by living organisms as metabolites (for examp

40、le, ethanol,various carbohydrates and fatty acids), materials manufactured by processing living organisms (for example, pellets manufacturedby shredding and pelletizing plant material) and materials produced by processing living organisms, their components ormetabolites (for example, transesterified

41、 oil; also called biodiesel).3.1.12 biosurfactant, na biologically produced molecule that acts as a soap or detergent.3.1.13 consortium (pl. consortia), nmicrobial community comprised of more than one, species that exhibits properties notshown by individual community members.3.1.13.1 DiscussionConso

42、rtia often mediate biodeterioration processes that individual taxa cannot.3.1.14 depacifying, adjthe process of removing hydrogen ions (protons) from the cathodic surface of an electrolytic cell,thereby promoting continued electrolytic corrosion.3.1.15 deplasticize, vthe process of breaking down pol

43、ymers in plastics and similar materials, resulting in loss of thematerials structural integrity.3.1.16 facultative anaerobe, na microorganism capable of growing in both oxic and anoxic environments.3.1.16.1 DiscussionFacultative anaerobes use oxygen when it is present, and use either organic or inor

44、ganic energy sources (nitrate, sulfate, and soforth) when oxygen is depleted or absent.3.1.17 fungus (pl. fungi), nsingle cell (yeasts) or filamentous (molds) microorganisms that share the property of having thetrue intracellular membranes (organelles) that characterize all higher life forms (Eukary

45、otes).3.1.18 metabolite, na chemical substance produced by any of the many complex chemical and physical processes involvedin the maintenance of life.3.1.19 microbial activity test, nany analytical procedure designed to measure the rate or results of one or more microorganismprocesses.3.1.19.1 Discu

46、ssionExamples of microbial activity tests include loss or appearance of specific molecules or measuring the rate of change of parameters,such as acid number, molecular weight distribution (carbon number distribution), and specific gravity.3.1.20 microbially influenced corrosion (MIC), ncorrosion tha

47、t is enhanced by the action of microorganisms in the localenvironment.3.1.21 mold, nform of fungal growth, characterized by long strands of filaments (hyphae) and, under appropriate growthconditions, aerial, spore-bearing structures.3.1.21.1 DiscussionIn fluids, mold colonies typically appear as sof

48、t spheres; termed fisheyes.3.1.22 obligate aerobe, nmicroorganism with an absolute requirement for atmospheric oxygen in order to function.3.1.22.1 DiscussionD6469 144Obligate aerobes may survive periods in anoxic environments but will remain dormant until sufficient oxygen is present to supportthei

49、r activity.3.1.23 obligate anaerobe, nmicroorganism that cannot function when atmospheric oxygen is present.3.1.23.1 DiscussionObligate anaerobes may survive periods in oxic environments but remain dormant until conditions become anoxic.3.1.24 oxic, adjan environment with a sufficient partial pressure of oxygen to support aerobic growth.3.1.25 shock treatment, nthe addition of an antimicrobial agent sufficient to cause rapid and substantial (several orders ofmagnitude) reductions in number of living microbes in a fluid or system