[计算机类试卷]微软认证70-215模拟试卷9及答案与解析.doc

《[计算机类试卷]微软认证70-215模拟试卷9及答案与解析.doc》由会员分享，可在线阅读，更多相关《[计算机类试卷]微软认证70-215模拟试卷9及答案与解析.doc（12页珍藏版）》请在麦多课文档分享上搜索。

1、微软认证 70-215模拟试卷 9及答案与解析 1 Ezonexam has 50 offices. The employees in these offices have limited knowledge of Windows 2000. Each office has a network of between five and 20 client computers. The office networks are connected to each other. The company is buying 50 identical computers to run Windows 20

2、00 Server in these offices. The server must be installed to the companys standard configuration. You use Setup Manager to create a network shared distribution folder and a Unattend.txt file that specifies the companys standard configuration. You want to automate the installation process as much as p

3、ossible, in the least possible amount of time. What should you do? （ A） Run Makebt32.exe to create four installation startup disks and add the Unattend.txt file to the first disk. Instruct an employee at each office to start the installation by using these disks. （ B） Create a Microsoft MS-DOS netwo

4、rk boot disk that makes a connection to the network shared distribution folder and runs the winnt command with the /s and /u switches. Instruct an employee at each office to start the installation by using this disk. （ C） Create a floppy disk that contains only the Unattend.txt file. Instruct an emp

5、loyee at each office to start the installation by using the Windows 2000 Server compact disc, with the floppy disk inserted. （ D） Create a Windows 2000 folder on a hard disk. Copy the Windows 2000 Server compact disc to the folder. Add the Unattend.txt file to the folder. Copy the folder to a writea

6、ble CD. Instruct an employee at each office to start the installation by suing this CD. 2 You are the network administrator responsible for testing and deploying new service packs for Windows 2000. Your forest has two trees, with four domains in each tree, as shown in the exhibit.For the testing of

7、each service pack, you plan to deploy the service pack to the support.IS domain and the support.IS domain, but to no other domains. You plan to use a Group Policy to configure and administer the service pack package. You need to minimize the complexity and administration of the service pack package,

8、 and to minimize network traffic between the domains.You create a Microsoft Windows Installer package for the service pack. What should you do to configure the Group Policy?（ A） Configure the Windows Installer package in a Group Policy for the and domains （ B） Configure the Windows Installer packa

9、ge in a Group Policy for the support.IS and support.IS domains. （ C） Configure two sites, with one tree in each site. Configure the Windows Installer package in a Group Policy for each site. （ D） Configure one site that contains both trees. Configure the Windows Installer package in a Group Policy f

10、or the site. 3 The company is buying 50 identical computers to run Windows 2000 Server in these offices. These servers must be installed to the companys standard configuration. You create a setup information file (SIF) that specifies the companys standard configuration. You want to automate the inst

11、allation process as much as possible in the least possible amount of time. What should you do? （ A） Use Makebt32.exe to create four installation startup disks and add the SIF to the first disk. Instruct an employee at each office to start the installation by using these disks. （ B） Create an MS-DOS

12、boot disk that contains CD ROM drivers and the SIF and that runs the Winnt/S: D:i386 command. Instruct an employee at each office to start the installation by using this disk. （ C） Create a floppy disk that contains only the SIF. Instruct an employee at each office to start the installation by using

13、 the Windows 2000 Server CD-ROM, with the floppy disk inserted. （ D） Create a Windows 2000 folder on a hard disk. Copy the Windows 2000 Server CD-ROM to the folder. Add the SIF to the folder. Copy the folder to a writable CD. Instruct an employee at each office to start the installation by using thi

14、s CD. 4 You are the administrator of a Windows NT Server 4.0 computer names Ezonexam1. Ezonexam1 is a backup domain controller in Es Windows 2000 Active Directory domain. Ezonexam1 contains five hard disks. Disks 0 and 1 are configured as a Windows NT 4.0 mirror set and contain the operating system

15、files. There are 300 MB of disk space remaining on the Windows NT 4.0 mirror set. Disk 2, 3, and 4 are configured as a Windows NT 4.0 stripe set with parity and contain employee data files. The Windows NT 4.0 stripe set with parity has a maximum capacity of 140 GB and currently has 15 GB free. Ezone

16、xam1 runs an application that is used by all of Es employees. A new version of the application is available. The new version requires Windows 2000 Server. The application will not run on a domain controller. You need to install the new application on Ezonexam1 as quickly as possible. What should you

17、 do first? （ A） Install Windows 2000 Server on Ezonexam1. Configure Ezonexam1 to use a dual boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server. （ B） On a second Windows 2000 Server computer, run the sysprep utility to create a cloned server image. Use this image to upgrad

18、e Ezonexam1. （ C） Upgrade Ezonexam1 to be a Windows 2000 member server. After the upgrade, run the dcpromo utility on Ezonexam1. （ D） Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a member server. 5 You are an administrator of Es network. You want

19、to perform routine upgrades on your Windows 2000 Server computer. You use your non-administrator user account in the domain to logon to the server. You want to upgrade all of the critical system files and patches on the server in the shortest possible time. What should you do? （ A） Use Windows Updat

20、e. （ B） Run System File Checker. （ C） Log on as administrator and run Windows Update. （ D） Log on as administrator and run System File Checker. 6 Your network uses TCP/IP as the only network protocol. Devices on the network are configured to use IP addresses from the private 10.0.0.0 range. All the

21、client computers on the network use Windows 2000 Professional. The network includes Windows 2000 Servers and UNIX Servers. Users print jobs are sent to shared printers on a Windows 2000 Server computer named PrintServ that directs the print jobs to the print devices attached directly to the network.

22、 You have a high-capacity print device that is attached to one of the UNIX Servers. The UNIX computer uses the LPR printing protocol, and its IP address is 10.1.1.99. The name of the printer queue is GIANT. You want users to be able to connect to this printer from their computers. What should you do

23、? （ A） Install Microsoft Print Services for UNIX on PrintServ. Create a network printer on the users computers, and specify that the printer URL is LPR:/10.1.1.99/GIANT. （ B） Install Microsoft Print Services for UNIX on the users computers. Create a network printer on the users computers, and specif

24、y that the printer URL is LPR:/10.1.1.99/GIANT. （ C） Create a network printer on PrintServ and specify that the printer name is 10.1.1.99GIANT. Share this printer and connect to it from the users computers. （ D） Create a local printer on PrintServ. Create a new TCP/IP port for an LPR server at addre

25、ss 10.1.1.99 with a queue name of GIANT. Share this printer and connect it from the users computers. 7 Es network consists of Windows 2000 Professional and UNIX client computers. You install a Windows 2000 Server computer on the network. All computers that are connected to the network use TCP/IP as

26、their only network protocol. Several laser print devices are attached to the UNIX computers. You want to enable the Windows 2000 Professional computers to print to these printers. You want to make the minimum number of configuration changes necessary to achieve this goal. What should you do? （ A） In

27、stall Simple TCP/IP services on the Windows 2000 Server computer. Configure printers on the Windows 2000 Server computer to print to the print device attached to the UNIX computers. （ B） Install Print Services for UNIX on the Windows 2000 Server computer. Configure shared printers on the Windows 200

28、0 Server computer. Configure the UNIX computers to print to these shared printers. （ C） Disconnect the print devices from the UNIX computers and connect them to the Windows 2000 Server computer. Share the printers, and configure the Windows 2000 Professional computers and the UNIX computers to print

29、 to the shared printers. （ D） On the Windows 2000 Server computer, configure shared printers that connect to the print devices attached to the UNIX computers. Configure the Windows 2000 Professional computers to print to the shared printers on the Windows 2000 Server computer. 8 You are the network

30、administrator for Ezonexam. You are planning to upgrade Windows NT Server 4.0 computers to Windows 2000 Server. You want to perform the upgrades by means of a distribution folder. You need to install a custom application as part of the upgrade. You need to include the commands necessary so that the

31、custom application is installed as part of the upgrade process. What should you do? (Each correct answer presents part of the solution. Choose two) （ A） Create a command file named Unattend.txt to install the application. （ B） Create a command file named Cmdlines.txt to install the application. （ C）

32、 Copy the command file to the $OEM$C subfolder under the i386 folder. （ D） Copy the command file to the subfolder named $OEM$ under the i386 folder. （ E） Copy the command file to the subfolder named $OEM$textmode under the i386 folder. 9 You are the network administrator for Ezonexam. You are prepar

33、ing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers. You want to install Windows 2000 Server from source files that are located on a shared folder called I386 on a Windows 2000 Server comput

34、er named Ezonexam1. What should you do? (Each correct answer presents part of the solution. Choose two) （ A） On a Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk. （ B） On a Windows 2000 computer, format a floppy disk. Copy

35、NTLDR, Boot.ini, N, and Ntbootdd.sys to this disk. Start the new computer by using the disk. （ C） Start the new computer by using a Windows 98 network boot disk. （ D） Connect to Ezonexam1I386 and run Winnt32.exe. （ E） Connect to Ezonexam1I386 and run Winnt.exe. 微软认证 70-215模拟试卷 9答案与解析 1 【正确答案】 B 【试题解

36、析】 Explanation: Winnt and not winnt32 as the boot disks operate in DOS mode and works with 16-bit applications. The /s:path switch specifies the location of the installation files for Windows 2000 Server. The /u:file switch specifies the location of the answer file for unattended installations and t

37、he number of seconds to wait between copying the files and restarting the computer. Since the employees have limited knowledge insofar as Windows 2000 is concerned, it would be best to make use of the winnt command-line with the abovementioned switches. Incorrect answers: A: This option presupposes

38、that the employees who will be tasked with the installation have a sound knowledge of Windows 2000. C, D: This option would be problematic since the employees have limited knowledge when it comes to Windows 2000. 2 【正确答案】 B 【试题解析】 Explanation: In this scenario we must create a new group policy and a

39、pply the installer package to it. We must then link the Group Policy to the two domains support.IS and support.IS. Incorrect answers: A: The Group Policy should be applied to the local domains. C: We apply the Group Policy to the domain, not to OUs. D: The Group Policy should be applied to both the

40、support.IS domain and support.IS domain. 3 【正确答案】 C 【试题解析】 Explanation: In this scenario we must use Setup Manager to create a winnt.sif. We must then copy this file to a floppy. Then start the installation process from the CD-ROM and insert the floppy disk. The installation process will be a fully

41、automated unattended installation. Incorrect answers: A: The .SIF file is used to perform an unattended installation. Makebt32.exe is used to create four installation startup disks. B: The winnt.exe command is run from the CD-ROM not from the diskette. D: The SIF file must reside on a diskette not o

42、n the CD-ROM. 4 【正确答案】 C 【试题解析】 Explanation: A member server is a Windows Server 200 server that has been installed as a non-domain controller and joined to a domain. This allows the server to operate as a file, print, and application server without the overhead of account administration. Once a ser

43、ver has been installed with Windows Server 2000, you can upgrade it to a domain controller through the Dcpromo utility. Incorrect answers: A: Configuring Dual-booting will not allow the application to be installed as quickly as possible. B: Sysprep is a tool that facilitates creating a disk image of

44、 your Windows 2000 Server installation. Disk duplication is a good choice if you need to install an identical configuration on multiple computers. But this is not what is required in this case. D: Making Ezonexam1 a member server is not enough. You also need to make use of the dcpromo utility. 5 【正确

45、答案】 C 【试题解析】 Explanation: Windows Update is used to upgrade the system files and to retrieve and apply the latest service packs and patches for the operating system. All necessary files are downloaded through the Internet. To be able to run Windows Update we must have administrative rights. Incorrec

46、t answers: A: The non-administrative user account cannot be used to run Windows Update. To run Windows Update we must have administrative rights. B: System File Checker checks the integrity of the system files. It cannot be used to upgrade the system files or to retrieve and apply the latest service

47、 packs and patches for the operating system. D: System File Checker checks the integrity of the system files. It cannot be used to upgrade the system files or to retrieve and apply the latest service packs and patches for the operating system. 6 【正确答案】 D 【试题解析】 Explanation: In this scenario a new lo

48、cal printer must be set up on PrintServ. The printer will use a TCP/IP port with the correct IP address. The queue name must be set to GIANT. Then we can share the printer and connect to it from other computers as a usual Windows 2000 printer. Incorrect answers: A: Microsoft print services for UNIX

49、would only be needed if the print device was attached to a Windows 2000 printer computer. B: Microsoft print services for UNIX would only be needed if the print device was attached to a Windows 2000 printer computer. C: The printer device is attached to a UNIX computer, which uses the LPR printing protocol. A network printer can only be created for print device connected to a Windows 2000 pri