ARMY MIL-DTL-15665 41-1996 DETAIL SPECIFICATION SHEET nINSIGNIA AIDE PRESIDENT OF THE UNITED STATES AIR FORCE《空军美国总统副官勋章》.pdf

《ARMY MIL-DTL-15665 41-1996 DETAIL SPECIFICATION SHEET nINSIGNIA AIDE PRESIDENT OF THE UNITED STATES AIR FORCE《空军美国总统副官勋章》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-DTL-15665 41-1996 DETAIL SPECIFICATION SHEET nINSIGNIA AIDE PRESIDENT OF THE UNITED STATES AIR FORCE《空军美国总统副官勋章》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、NIL-DTL-L5665/4L m 0b 20L73L 3T8 m I NOT MEASUREMENT SENSITIVE 1 MIL-DTL-15665/41 27 June 1996 SUPERSEDING MIL-I-3575/2D 23 May 1995 DETAIL SPECIFICATION SHEET INSIGNIA, AIDE, PRESIDENT OF THE UNITED STATES, AIR FORCE This specification is approved for use by all Departments and Agencies of the Depa

2、rtment of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and the issue of MIL-DTL-15665 listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation. MATERIAL: Gilding Me

3、tal FINISH: Hard Enameled, Nickel Plated, Mirror-like Polished and shall match TIOH Metal Chip Number 16. DIMENSIONS: HEIGHT (Overall) : 15/16 inch (2.38 cm) (REF) WIDTH (At Wing Tips) : 7/8 inch (2.22 cm) (REF) THICKNESS (At Thickest Point): SHIELD: 0.078 inch + 0.010 inch - O (0.198 cm + 0.025 cm

4、- O) EAGLE: 0.045 inch + 0.010 inch - O (0.114 cm + 0.025 cm - O) AMSC N/A FSC 8455 PISTRI BUTION STATEMENT 9 . Approved for public release; distribution is unlimited. 1 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15665/41 NOTES : fu

5、rnished hub or die. 1. The term (REF) refers to measurements taken from the Government 2. Enameled color shall be blue as indicated. The enamel color shall conform to TIOH color chip number 18 or the standard sample. 3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of

6、the manufacturer. 4. Attaching device shall be prong and clutch type. Prongs shall be located on the vertical center line, equidistant from each end and 5/8 inch k 1/64 inch (1.59 cm +. 0.04 cm) apart. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes

7、with respect to the previous issue due to the extent of the changes. Custodian: Army - IH Air Force - 45 Review activities: Air Force - 32, 82, 99 DLA - CT preparing activity: Army - IH (Project NO. 8455-0844) 2 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-