ARMY MIL-DTL-15665 40-1996 DETAIL SPECIFICATION SHEET nINSIGNIA AIDE PRESIDENT OF THE UNITED STATES ARMY《陆军美国总统副官勋章》.pdf

《ARMY MIL-DTL-15665 40-1996 DETAIL SPECIFICATION SHEET nINSIGNIA AIDE PRESIDENT OF THE UNITED STATES ARMY《陆军美国总统副官勋章》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-DTL-15665 40-1996 DETAIL SPECIFICATION SHEET nINSIGNIA AIDE PRESIDENT OF THE UNITED STATES ARMY《陆军美国总统副官勋章》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-DTL-15bb5/40 = 999990b 2019729 74T I NOT MEASUREMENT SENSITIVE 1 MIL-DTL-15665/40 SUPERSEDING MIL-I-3575/1D 23 May 1995 DETAIL SPECIFICATION SHEET INSIGNIA, AIDE, PRESIDENT OF THE UNITED STATES, ARMY This specification is approved for use by all Departments and Agencies of the Department of Defe

2、nse. The requirements for acquiring the product described herein shall consist of this specification sheet and the issue of MIL-DTL-15665 listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation. MATERIAL : -1: Gilding Metal -2: R

3、ed Brass or Zinc Aluminum DASH NO. -1: Regular -2: Subdued FINISH: match TIOH Metal Chip Number 8. shall match TIOH Metal Chip Number 6. 2: Dull Flat Black Enamel. -1: EAGLE: Gold Plated, Matte Finish, Polished Highlights and shall SHIELD: Hard Enameled, Gold Plated, Mirror-like Polished and DIMENSI

4、ONS: EAGLE AND SHIELD: HEIGHT (Overall) : 1-1/4 inches (3.18 cm) (REF) WIDTH (Overall) : 13/16 inch (2.06 cm) (REF) THICKNESS (At Thickest Point on Shield): 0.080 inch distribution is unlimited. 1 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

5、MIL-DTL-L5bbS/40 9999906 2039730 LtbL MIL-DTL-15665/40 NOTES : furnished hub or die. 1. The term (REF) refers to measurements taken from the Government 2. Pierced areas shall be as indicated 3. Enameled colors for Dash No. -1 shall be as indicated. The colors shall conform to the TIOH color chip num

6、bers listed below or the standard sample : COLOR ma Blue 20 White 28 4. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of the manufacturer. 5. Attaching device shall be prong and clutch type. Prongs shall be located on the vertical center line, equidistant from each end

7、 and 7/8 inch f 1/64 inch (2.22 cm f 0.04 cm) apart. 6. The dull, flat black enamel for Dash No. -2 shall match FED-STD- 595 Chip No. 37038. 7. Insignia for Dash No. -1 may be manufactured using 22 karat gold plated with nickel underplating as follows for commercial sale only: EAGLE: Gold Plated, Ma

8、tte Finish, Polished Highlights and shall SHIELD: Hard Enameled, Gold Plated, Mirror-like Polished and match TIOH Metal Chip Number 11. shall match TIOH Metal Chip Number 9. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Army - IH Preparing activity: Army - IH Review activities: DLA - CT (Project No. 8455-0844) 2 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-