IEEE 802.15.4s-2018 - IEEE Standard for Low-Rate Wireless Networks Amendment 6 Enabling Spectrum Resource Measurement Capability.pdf

《IEEE 802.15.4s-2018 - IEEE Standard for Low-Rate Wireless Networks Amendment 6 Enabling Spectrum Resource Measurement Capability.pdf》由会员分享，可在线阅读，更多相关《IEEE 802.15.4s-2018 - IEEE Standard for Low-Rate Wireless Networks Amendment 6 Enabling Spectrum Resource Measurement Capability.pdf（51页珍藏版）》请在麦多课文档分享上搜索。

1、 IEEE Standard for Low-Rate Wireless Networks Amendment 6: Enabling Spectrum Resource Measurement Capability Sponsored by the LAN/MAN Standards Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Computer Society IEEE Std 802.15.4s-2018 (Amendment to IEEE Std 802.15.4-2015 as amended by IE

2、EE Std 802.15.4n-2016, IEEE Std 802.15.4q-2016, IEEE Std 802.15.4u-2016, IEEE Std 802.15.4t-2017, IEEE Std 802.15.4v-2017, and IEEE Std 802.15.4-2015/Cor 1-2018) 1Copyright 2018 IEEE. All rights reserved.IEEE Std 802.15.4s -2018(Amendment toIEEE Std 802.15.4 -2015as amended by IEEE Std 802.15.4n -20

3、16,IEEE Std 802.15.4q -2016, IEEE Std 802.15.4u -2016,IEEE Std 802.15.4t-2017, I EEE Std 802.15.4v-2017, andIEEE Std 802.15.4-2015/Cor 1-2018)IEEE Standard for Low-RateWireless Networks Amendment 6: Enabling Spectrum Resource Measurement CapabilitySponsorLAN/MAN Standards Committeeof theIEEE Compute

4、r SocietyApproved 15 February 2018IEEE-SA Standards BoardThe Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2018 by The Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 27 June 2018. Printed in the Unit

5、ed States of America.IEEE and 802 are registered trademarks in the U.S. Patent fitnessfor a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completenessof material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effor

6、t.IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that thereare no other ways to produce, test, measure, purchase, market, or provide other goods and services related tothe scope of the

7、IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved andissued is subject to change brought about through developments in the state of the art and commentsreceived from users of the standard. In publishing and making its standards available, IEEE is not suggesting o

8、r rendering professional or otherservices for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by anyother person or entity to another. Any person utilizing any IEEE Standards document, should rely upon hisor her own independent judgment in the exercise of reas

9、onable care in any given circumstances or, asappropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEEstandard.IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMI

10、TED TO:PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; ORBUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OROTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCEUP

11、ON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE ANDREGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.Translations The IEEE consensus development process involves the review of documents in English only. In the eventthat an IEEE standard is translated, only the English version publ

12、ished by IEEE should be considered theapproved IEEE standard.4Copyright 2018 IEEE. All rights reserved.Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards BoardOperations Manual shall not be considered or inferred to be the official positi

13、on of IEEE or any of itscommittees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures,symposia, seminars, or educational courses, an individual presenting information on IEEE standards shallmake it clear that his or her views should be considered the pers

14、onal views of that individual rather than theformal position of IEEE. Comments on standardsComments for revision of IEEE Standards documents are welcome from any interested party, regardless ofmembership affiliation with IEEE. However, IEEE does not provide consulting information or advicepertaining

15、 to IEEE Standards documents. Suggestions for changes in documents should be in the form of aproposed change of text, together with appropriate supporting comments. Since IEEE standards represent aconsensus of concerned interests, it is important that any responses to comments and questions also rec

16、eivethe concurrence of a balance of interests. For this reason, IEEE and the members of its societies andStandards Coordinating Committees are not able to provide an instant response to comments or questionsexcept in those cases where the matter has previously been addressed. For the same reason, IE

17、EE does notrespond to interpretation requests. Any person who would like to participate in revisions to an IEEEstandard is welcome to join the relevant IEEE working group.Comments on standards should be submitted to the following address:Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, N

18、J 08854 USALaws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with theprovisions of any IEEE Standards document does not imply compliance to any applicable regulatoryrequirements. Implementers of the standard are responsible for obse

19、rving or referring to the applicableregulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is notin compliance with applicable laws, and these documents may not be construed as doing so.Copyrights IEEE draft and approved standards are copyrighted by I

20、EEE under U.S. and international copyright laws.They are made available by IEEE and are adopted for a wide variety of both public and private uses. Theseinclude both use, by reference, in laws and regulations, and use in private self-regulation, standardization,and the promotion of engineering pract

21、ices and methods. By making these documents available for use andadoption by public authorities and private users, IEEE does not waive any rights in copyright to thedocuments.Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license tophotocopy por

22、tions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center,Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to5Copyrigh

23、t 2018 IEEE. All rights reserved.photocopy portions of any individual standard for educational classroom use can also be obtained throughthe Copyright Clearance Center.Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any

24、 timeby the issuance of new editions or may be amended from time to time through the issuance of amendments,corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of thedocument together with any amendments, corrigenda, or errata then in effect. Every I

25、EEE standard is subjected to review at least every ten years. When a document is more than ten yearsold and has not undergone a revision process, it is reasonable to conclude that its contents, although still ofsome value, do not wholly reflect the present state of the art. Users are cautioned to ch

26、eck to determine thatthey have the latest edition of any IEEE standard.In order to determine whether a given document is the current edition and whether it has been amendedthrough the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/ or contact IE

27、EE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org.Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.or

28、g/findstds/errata/index.html. Users are encouraged to check this URL for errataperiodically.PatentsAttention is called to the possibility that implementation of this standard may require use of subject mattercovered by patent rights. By publication of this standard, no position is taken by the IEEE

29、with respect to theexistence or validity of any patent rights in connection therewith. If a patent holder or patent applicant hasfiled a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/paten

30、ts.html. Letters of Assurance may indicatewhether the Submitter is willing or unwilling to grant licenses under patent rights without compensation orunder reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfairdiscrimination to applicants desiring to obtain su

31、ch licenses.Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is notresponsible for identifying Essential Patent Claims for which a license may be required, for conductinginquiries into the legal validity or scope of Patents Claims, or determining whet

32、her any licensing terms orconditions provided in connection with submission of a Letter of Assurance, if any, or in any licensingagreements are reasonable or non-discriminatory. Users of this standard are expressly advised thatdetermination of the validity of any patent rights, and the risk of infri

33、ngement of such rights, is entirely theirown responsibility. Further information may be obtained from the IEEE Standards Association.6Copyright 2018 IEEE. All rights reserved.ParticipantsAt the time the draft of this standard was sent to sponsor ballot, the IEEE P802.15 Working Group had thefollowin

34、g voting members: Robert F. Heile, ChairRick Alfvin, Co-Vice ChairPatrick W. Kinney, Co-Vice ChairJames P. K. Gilb, Working Group Technical EditorPatrick W. Kinney, SecretaryShoichi Kitazawa, Task Group 15.4s Chair and Technical EditorHidetoshi Yokota, Task Group 15.4s Vice Chair, Secretary, and Lea

35、d Technical EditorMajor contributions were received from the following individuals:Mounir AchirKeiji AkiyamaPhilip BeecherFrederik BeerChandrashekhar P. S. BhatKiran BynamEdgar CallawayChris CalvertRadhakrishna CanchiKapseok ChangSoo-Young ChangClint ChaplinStephen ChaskoPaul ChiltonSangsung ChoiHen

36、dricus de RuijterGuido DolmansIgor DotlicStefan DrudeDietmar EggertShahriar EmamiAndrew EstradaDavid EvansGeorge FlammerKiyoshi FukuiMatthew GillmoreTim GodfreyElad GottlibJussi HaapolaRainer HachTimothy HarringtonJames HartmanMarco HernandezKen HiragaIwao HosakoYeong Min JangSeong-Soon JooAkifumi K

37、asamatsuShuzo KatoToyoyuki KatoJeritt KentJaehwan KimYoungsoo KimShoichi KitazawaTero KivinenRyuji KohnoFumihide KojimaThomas KuernerByung-Jae KwakJae Seung LeeMyung LeeSangjae LeeHuan-Bang LiQing LiMichael LynchItaru MaekawaHiroyuki MatsumuraMichael McLaughlinMichael McInnisRobert MoskowitzJinesh P

38、. NairChiu NgoPaul NikolichJohn NotorHiroyo OgawaTaejoon ParkGlenn ParsonsCharles PerkinsAlbert PetrickVerotiana RabarijaonaIvan ReedeRichard RobertsBenjamin A. RolfeRuben E. Salazar CardozoNoriyuki SatoNorihiko SekineKunal ShahStephen ShellhammerShusaku ShimadaGary StuebingDon SturekMineo TakaiKou

39、TogashiBilly VersoGabriel VillardiBrian WeisMakoto YaitaPeter YeeYu ZengChunhui (Allan) ZhuMasa AriyoshiChris CalvertJames P.K. GilbShoichi KitazawaMitsuru IwaokaBenjamin A. RolfeShusaku ShimadaMineo TakaiHidetoshi Yokota7Copyright 2018 IEEE. All rights reserved.The following members of the individu

40、al balloting committee voted on this standard. Balloters may havevoted for approval, disapproval, or abstention. When the IEEE-SA Standards Board approved this standard on 15 February 2018, it had the followingmembership:Jean-Philippe Faure, ChairVacant Position, Vice ChairJohn D. Kulick, Past Chair

41、Konstantinos Karachalios, Secretary*Member EmeritusTomoko AdachiThomas AlexanderJames D. AllenNobumitsu AmachiLai King Anna TeeMichael BahrHarry BimsNancy BravinVern BrethourDemetrio Bucane Jr.William ByrdEdgar CallawayJuan CarreonSuresh ChannarasappaKeith ChowHendricus De RuijterSourav DuttaRichard

42、 EdgarAvraham FreedmanTim GodfreyEric W. GrayRandall GrovesMarco HernandezWerner HoelzlRita HornerNoriyuki IkeuchiSergiu IordanescuAkio IsoAtsushi ItoRaj JainSangKwon JeongRitesh KallePiotr KarockiStuart KerryYongbum KimTero KivinenYasushi KudohHyeong Ho LeeJames LeppHuan-Bang LiElvis MaculubaJeffer

43、y MastersMichael McInnisRichard MellitzMichael MontemurroRick MurphyJohn NotorSatoshi OyamaBansi PatelArumugam PaventhanDalibor PokrajacClinton PowellVenkatesha PrasadMaximilian RiegelRobert RobinsonBenjamin RolfeM. K. SajeevNaotaka SatoNoriyuki SatoKunal ShahDaniel SmithDorothy StanleyThomas Starai

44、Walter StrupplerGary StuebingMark SturzaBo SunLorenzo VangelistaDmitri VarsanofievBilly VersoGeorge VlantisKhurram WaheedLisa WardScott WillyAndreas WolfOren YuenTed BurseGuido R. HiertzGary HoffmanCristel HunterMichael Janezic Joseph L. Koepfinger* Thomas KoshyHung LingXiaohui LiuKevin LuDeleep Moh

45、laAndrew MylesPaul NikolichRonald C. PetersonAnnette D. ReillyRobby RobsonDorthy StanleyMehmet UlemaPhil WennblomPhilip WinstonHoward WolfmanJingy Zhou8Copyright 2018 IEEE. All rights reserved.IntroductionThis amendment to IEEE Std 802.15.4-2015 enhances the functionalities to realize spectrum resou

46、rcemeasurement and management for IEEE Std 802.15.4 physical layer (PHY) and medium access control layer(MAC). The standardized management mechanism enables individual PAN devices to coordinate with eachother and operate more efficiently where devices are densely deployed in shared license exempt fr

47、equencybands and heavy interference could limit the overall performance. To this end, this amendment specifies theframework, PIB attributes, MLME primitives and MAC commands for exchanging information on spectrumresource usage, which includes the following: Spectrum resource measurements a nd networ

48、k performance metrics. Information elements and data structures to capture these meas urements. Procedures for collecting and ex changing spectrum resource measurement information with higherlayers or other devices.This amendment builds on popularity of IEEE Std 802.15.4-2015 to enhance performance

49、of existingdeployment and increases opportunities for applications of IEEE Std 802.15.4-2015 based system in newways.This introduction is not part of IEEE Std 802.15.4s-2018, IEEE Standard for Low-Rate Wireless NetworksAmendment 6: Enabling Spectrum Resource Measurement Capability.9Copyright 2018 IEEE. All rights reserved.Contents3. Definitions, acronyms, and abbreviations123.2 Acronyms and abbreviations.125. General description125.7 Functional overview125.7.7 Enabling spectrum resource measurement capability.126. MAC functional descriptions.136.17Spectr