IEEE C37.246-2017 Guide for Protection Systems of Transmission-to-Generation Interconnections.pdf

《IEEE C37.246-2017 Guide for Protection Systems of Transmission-to-Generation Interconnections.pdf》由会员分享，可在线阅读，更多相关《IEEE C37.246-2017 Guide for Protection Systems of Transmission-to-Generation Interconnections.pdf（62页珍藏版）》请在麦多课文档分享上搜索。

1、IEEE Guide for Protection Systems of Transmission-to-Generation Interconnections IEEE Std C37.246-2017 IEEE Power and Energy Society Sponsored by the Power System Relaying and Control Committee IEEE 3 Park Avenue New York, NY 10016-5997 USAIEEE Std C37.246-2017 IEEE Guide for Protection Systems of T

2、ransmission-to-Generation Interconnections Sponsor Power System Relaying and Control Committee of the IEEE Power and Energy Society Approved 28 September 2017 IEEE-SA Standards BoardAbstract: This guide documents accepted protection practices for transmission-to-generation interconnections. It is in

3、tended to cover the protection system applications at the interconnections between transmission systems and generation facilities greater than 10 MVA. This guide does not cover distributed energy resources. Keywords: generation facility, generator owner, IEEE C37.246, interconnection, interconnectio

4、n protection, point of interconnection, power system, transmission owner, transmission system The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2018 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Pub

5、lished 11 May 2018. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating

6、to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and

7、 services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its stand

8、ards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own i

9、ndependent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

10、 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN AN

11、Y WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE W AS FORESEEABLE.4 Copyright 2018 IEEE. All rights reserved. Translations The IEEE consensus development process involves the review of documen

12、ts in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual s

13、hall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall ma

14、ke it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However

15、, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests,

16、it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases

17、 where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the follo

18、wing address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable

19、 regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be constr

20、ued as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use

21、in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents.5 Copyright 2018 IEEE. All rights reserv

22、ed. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please conta

23、ct Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Use

24、rs of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edit

25、ion of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years old and has not undergone a revision process, it is reasonable to conclude that its contents, although sti

26、ll of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendm

27、ents, corrigenda, or errata, visit the IEEE Xplore at http:/ ieeexplore .ieee .or g/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/ standards .ieee .or g. Errata Errata, if any, for

28、all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require

29、use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter o

30、f Assurance, then the statement is listed on the IEEE- SA Website at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates,

31、 with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims f

32、or which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-disc

33、riminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.6 Copyright 2018 IEEE. All righ

34、ts reserved. Participants At the time this guide was completed, the C18 Working Group had the following membership: Alla Deronja, Chair Keith Houser, Vice Chair Abu Bapary Jeffrey Barsch Randall Cunico Will English Dominick Fontana Dale Fredrickson Nathan Gulczynski Mike Jensen Gerald Johnson (corre

35、sponding) Y uan Liao Heather Malson Rene Midence (corresponding) Dean Miller John Miller Adi Mulawarman (corresponding) Mukesh Nagpal James OBrien Mahendra Patel Manish Patel Neftaly Torres (corresponding) Ian Tualla Joe Uchiyama Joseph V alenzuela Solveig Ward Richard Y oung The following members o

36、f the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. Ali Al A wazi Radoslav Barac Thomas Barnes Jeffrey Barsch Michael Basler Philip Beaumont Martin Best Wallace Binder Thomas Blair William Bloethe Brian Boysen Clarence Bradley

37、Jeffrey Brogdon Demetrio Bucaneg William Bush William Byrd Paul Cardinal Randall Crellin Randall Cunico Jonathan Deverick Kevin Donahoe Gary Donner Michael Dood Ahmed El Sherbieny Dominick Fontana Dale Fredrickson Jean-Sebastien Gagnon Jalal Gohari Stephen Grier Randall Groves Nathan Gulczynski Roge

38、r Hedding Werner Hoelzl Robert Hoerauf Gerald Johnson Peter Kelly Yuri Khersonsky James Kinney Gary Kobet Boris Kogan Jim Kulchisky Mikhail Lagoda Chung-Yiu Lam Raluca Lascu Lawrenc Long Don Lukach Bruce Mackie Heather Malson Omar Mazzoni Walter McCannon Dean Miller Daleep Mohla Joe Mooney Brian Mug

39、alian Adi Mulawarman Jerry Murphy R. Murphy Bruce Muschlitz Anthony Napikoski Michael Newman James OBrien Lorraine Padden Subhash Patel Christopher Petrola Robert Pettigrew Charles Rogers Steven Sano Thomas Schossig Robert Seitz Hyeong Sim Philip Spotts Wayne Stec Gary Stoedter Michael Thompson Wayn

40、e Timm Demetrios Tziouvaras James V an De Ligt Tou V ang John V ergis Quintin V erzosa Christopher Walker John Wang Karl Weber Kenneth White Roger Whittaker Philip Winston Richard Y oung Jian Y u7 Copyright 2018 IEEE. All rights reserved. When the IEEE-SA Standards Board approved this guide on 28 Se

41、ptember 2017, it had the following membership: Jean-Phillipe Faure, Chair Gary Hoffman, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Ted Burse Stephen Dukes Doug Edwards J. Travis Griffith Michael Janezic Thomas Koshy Joseph L. Koepfinger* Kevin Lu Daleep Mohla Damir Novosel Ronald C. Petersen Annette D. Reilly Robby Robson Dorothy Stanley Adrian Stephens Mehmet Ulema Phil Wennblom Howard Wolfman Y u Y uan *Member Emeritus