IEEE 45.7-2012 - IEEE Recommended Practice for Electrical Installations on Shipboard -- AC Switchboards.pdf

《IEEE 45.7-2012 - IEEE Recommended Practice for Electrical Installations on Shipboard -- AC Switchboards.pdf》由会员分享，可在线阅读，更多相关《IEEE 45.7-2012 - IEEE Recommended Practice for Electrical Installations on Shipboard -- AC Switchboards.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、 IEEE Recommended Practice for Electrical Installations on Shipboard AC Switchboards Sponsored by the Petroleum & Chemical Industry Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA 11 May 2012 IEEE Marine Industry Subcommittee of the Industry Applications Society IEEE Std 45.7-2012 IEEE Std

2、45.7-2012 IEEE Recommended Practice for Electrical Installations on ShipboardAC Switchboards Sponsor Petroleum & Chemical Industry Committee of the IEEE Marine Industry Subcommittee of the Industry Applications Society Approved 29 March 2012 IEEE-SA Standards Board Abstract: Recommendations for the

3、design, selection, and installation of switchboards on merchant vessels with electrical apparatus for lighting, signaling, communication, power, and propulsion are provided. Keywords: IEEE 45.7, marine electrical engineering, marine vessels, shipboard systems, ships, switchboards The Institute of El

4、ectrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2012 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 11 May 2012. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent &

5、Trademark Office, owned by The Institute of Electrical and Electronics Engineers, Incorporated. PDF: ISBN 978-0-7381-7264-4 STD97239 Print: ISBN 978-0-7381-7370-2 STDPD97239 IEEE prohibits discrimination, harassment, and bullying. For more information, visit http:/www.ieee.org/web/aboutus/whatis/pol

6、icies/p9-26.html. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Notice and Disclaimer of Liability Concerning the Use of IEEE Documents: IEEE Standards documents are developed within t

7、he IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied vi

8、ewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While IEEE administers the process and establishes rules to promote fairness in the consensus development process, IEEE does not independently evaluate, test,

9、or verify the accuracy of any of the information or the soundness of any judgments contained in its standards. Use of an IEEE Standard is wholly voluntary. IEEE disclaims liability for any personal injury, property or other damage, of any nature whatsoever, whether special, indirect, consequential,

10、or compensatory, directly or indirectly resulting from the publication, use of, or reliance upon any IEEE Standard document. IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and expressly disclaims any express or implied warranty, including any i

11、mplied warranty of merchantability or fitness for a specific purpose, or that the use of the material contained in its standards is free from patent infringement. IEEE Standards documents are supplied “AS IS.” The existence of an IEEE Standard does not imply that there are no other ways to produce,

12、test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received fro

13、m users of the standard. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of

14、the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity. Nor is IEEE undertaking to perfo

15、rm any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determini

16、ng the appropriateness of a given IEEE standard. Translations: The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Offici

17、al Statements: A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered the official position of IEEE or any of its committees and shall not be considered to be, nor be relied upon as, a formal position of IEEE. At l

18、ectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on Standards: Comments for revision of IE

19、EE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of tex

20、t, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important to ensure that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies a

21、nd Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. Any person who would like to participate in evaluating comments or revisions to an IEEE standard is welcome to join the rele

22、vant IEEE working group at http:/standards.ieee.org/develop/wg/. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Photocopies: Authorization to photocopy portions of any individual standard for internal or p

23、ersonal use is granted by The Institute of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923

24、USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Notice to users Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Comp

25、liance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend

26、 to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights This document is copyrighted by the IEEE. It is made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regula

27、tions, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making this document available for use and adoption by public authorities and private users, the IEEE does not waive any rights in copyright to this document. Updating of IEEE docum

28、ents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the curr

29、ent edition of the document together with any amendments, corrigenda, or errata then in effect. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/standard

30、s.ieee.org/index.html or contact the IEEE at the address listed previously. For more information about the IEEE Standards Association or the IEEE standards development process, visit IEEE-SA Website at http:/standards.ieee.org/index.html. Errata Errata, if any, for this and all other standards can b

31、e accessed at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By pub

32、lication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-

33、SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free

34、 of any unfair discrimination to applicants desiring to obtain such licenses. Copyright 2012 IEEE. All rights reserved. iv Copyright 2012 IEEE. All rights reserved. vEssential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying E

35、ssential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements ar

36、e reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Partic

37、ipants At the time this IEEE recommended practice was completed, the Shipboard Electrical InstallationsSwitchboard Working Group had the following membership: Steven Liggio, Chair John Winbery, Vice Chair Arthur Currier Bob Jones Stefan Stan Diana Zimmerman The following members of the individual ba

38、lloting committee voted on this recommended practice. Balloters may have voted for approval, disapproval, or abstention. Dwight Alexander Michael Bayer Paul Bishop Rudy Bright William Bush William Byrd Eldridge Byron Keith Chow Norbert Doerry Gary Donner Marcia Eblen Randall Groves Lee Herron Werner

39、 Hoelzl Ronald Hotchkiss Mohammed Islam Piotr Karocki John Kay Tanuj Khandelwal Yuri Khersonsky Joseph L. Koepfinger Saumen Kundu Steven Liggio Greg Luri William McBride David T. Mills Dennis Neitzel Michael S. Newman Lorraine Padden Richard Paes Sergio A. Panetta James K. Phillips Iulian Profir Vin

40、cent Saporita Gary Savage Bartien Sayogo Robert Seitz Gil Shultz James Smith Michael Steurer Peter Sutherland John Vergis When the IEEE-SA Standards Board approved this recommended practice on 29 March 2012, it had the following membership: Richard H. Hulett, Chair John Kulick, Vice Chair Robert M.

41、Grow, Past President Judith Gorman, Secretary Satish Aggarwal Masayuki Ariyoshi Peter Balma William Bartley Ted Burse Clint Chaplin Wael Diab Jean-Philippe Faure Alexander Gelman Paul Houz Jim Hughes Joseph L. Koepfinger* David J. Law Thomas Lee Hung Ling Oleg Logvinov Ted Olsen Gary Robinson Jon Wa

42、lter Rosdahl Sam Sciacca Mike Seavey Yatin Trivedi Phil Winston Don Wright *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Don Messina IEEE Standards Program Manager, Document Devel

43、opment Erin Spiewak IEEE Standards Program Manager, Technical Program Development Copyright 2012 IEEE. All rights reserved. vi Contents 1. Overview . 11.1 Scope . 11.2 Purpose . 21.3 Limitations. 21.4 Word usage. 22. Normative references. 23. Definitions. 43.1 Acronyms and abbreviations . 44. genera

44、tor control, instrumentation, and protectiongeneral. 5AC4.1 Overload and short-circuit protection . 54.2 Reverse power protection . 54.3 Undervoltage and overvoltage sensing relays. 64.4 Underfrequency and overfrequency sensing relays .64.5 Synchronizing and paralleling controls . 64.6 Ground-fault detection and insulation monitoring.