IEEE 1671 4-2014 en Automatic Test Markup Language (ATML) Test Configuration《自动试验标记语言(ATML)试验配置》.pdf

《IEEE 1671 4-2014 en Automatic Test Markup Language (ATML) Test Configuration《自动试验标记语言(ATML)试验配置》.pdf》由会员分享，可在线阅读，更多相关《IEEE 1671 4-2014 en Automatic Test Markup Language (ATML) Test Configuration《自动试验标记语言(ATML)试验配置》.pdf（60页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 61671-4 Edition 1.0 2016-04 INTERNATIONAL STANDARD Standard for automatic test markup language (ATML) test configuration IEC61671-4:2016-04(en)IEEEStd 1671.4-2014 IEEE Std 1671.4 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEEE All rights reserved. IEEE is a registered trademark in t

2、he U.S. Patent 35.060 IEC ISBN 978-2-8322-3266-8IEEE ISBN 978-1-5044-0864-6STD20901 Warning! Make sure that you obtained this publication from an authorized distributor. IEEE Std 1671.4 Registered trademark of the International Electrotechnical Commission Contents 1. Overview 1 1.1 General 1 1.2 App

3、lication of this documents annexes 2 1.3 Scope . 2 1.4 Application 2 1.5 Conventions used within this document 3 2. Normative references 4 3. Definitions, acronyms, and abbreviations 4 3.1 Definitions . 4 3.2 Acronyms and abbreviations . 5 4. TestConfiguration schema 7 4.1 Background 7 4.2 Test conf

4、iguration.xsd . 7 5. TestConfiguration instance schema .32 6. ATML TestConfiguration XML schema names and locations 32 7. ATML XML schema extensibility 34 8. Conformance .34 Annex A (informative) IEEE download web-site material associated with this document .35 Annex B (informative) Test Configurati

5、on XML element mappings to MTPSI card fields .36 Annex C (informative) Examples 41 Annex D (informative) Bibliography 44 Annex ( (informative) /LVWRI,(3DUWLFLSDQWV .4IEC 61671-4:2016 IEEE Std 1671.4-2014 - ii -IEC 61671-4:2016 IEEE Std 1671.4-2014 Published by IEC under license from IEEE. 2014 IEEE.

6、 All rights reserved. STANDARD FOR AUTOMATIC TEST MARKUP LANGUAGE (ATML) INSTRUMENT DESCRIPTION FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of

7、 IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (P

8、AS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising wi

9、th the IEC also participate in this preparation. IEEE Standards documents are developed within IEEE Societies and Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. IEEE develops its standards through a consensus development process, which brings together

10、volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of IEEE and serve without compensation. While IEEE administers the process and establishes rules to promote fairness in the consensus development process, IEEE does not indepe

11、ndently evaluate, test, or verify the accuracy of any of the information contained in its standards. Use of IEEE Standards documents is wholly voluntary. IEEE documents are made available for use subject to important notices and legal disclaimers (see http:/standards.ieee.org/IPR/disclaimers.html fo

12、r more information). IEC collaborates closely with IEEE in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each t

13、echnical committee has representation from all interested IEC National Committees. The formal decisions of IEEE on technical matters, once consensus within IEEE Societies and Standards Coordinating Committees has been reached, is determined by a balanced ballot of materially interested parties who i

14、ndicate interest in reviewing the proposed standard. Final approval of the IEEE standards document is given by the IEEE Standards Association (IEEE-SA) Standards Board. 3) IEC/IEEE Publications have the form of recommendations for international use and are accepted by IEC National Committees/IEEE So

15、cieties in that sense. While all reasonable efforts are made to ensure that the technical content of IEC/IEEE Publications is accurate, IEC or IEEE cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniform

16、ity, IEC National Committees undertake to apply IEC Publications (including IEC/IEEE Publications) transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC/IEEE Publication and the corresponding national or regional publication shall be

17、 clearly indicated in the latter. 5) IEC and IEEE do not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC and IEEE are not responsible for any services carried out by independent

18、certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or IEEE or their directors, employees, servants or agents including individual experts and members of technical committees and IEC National Committees, or volun

19、teers of IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board, for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out o

20、f the publication, use of, or reliance upon, this IEC/IEEE Publication or any other IEC or IEEE Publications. 8) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention

21、 is drawn to the possibility that implementation of this IEC/IEEE Publication may require use of material covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. IEC or IEEE shall not be h

22、eld responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patent Claims or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or

23、 in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. - iii -IEC 61671-4:2016 IEEE Std 1671.4-2014 Pub

24、lished by IEC under license from IEEE. 2014 IEEE. All rights reserved. International Standard IEC 61671-4/IEEE Std 1671.4-2014 has been processed through IEC technical committee 91: Electronics assembly technology, under the IEC/IEEE Dual Logo Agreement. The text of this standard is based on the fol

25、lowing documents: IEEE Std FDIS Report on voting IEEE Std 1671.4-2014 91/1315/FDIS 91/1339/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The IEC Technical Committee and IEEE Technical Committee have decided tha

26、t the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. - iv

27、 -IEEE Standard for Automatic Test Markup Language (ATML) Test Configuration Sponsor IEEE Standards Coordinating Committee 20 on Test and Diagnosis for Electronic Systems Approved 27 March 2014 IEEE-SA Standards Board IEC 61671-4:2016 IEEE Std 1671.4-2014- v -Abstract: An exchange format is specifie

28、d in this standard, using extensible markup language (XML), for identifying the test configuration used to test for and diagnose faults of a unit under test (UUT) on an automatic test system (ATS). Keywords: ATML instance document, automatic test equipment (ATE), Automatic Test Markup Language (ATML

29、), automatic test system (ATS), IEEE 1671.4, Master Configuration Control Document (MCCD), Master Test Program Set Index (MTPSI), station configuration file, test configuration, XML schema xOpenVMS is a registered trademark of Hewlett-Packard Development Company, L.P. UNIX is a registered trademark

30、of The Open Group. W3C is a trademark or registered trademark of the W3C, (registered in numerous countries) World Wide Web Consortium. Marks of W3C are registered and held by its host institutions: Massachusetts Institute of Technology (MIT), European Research Consortium for Information and Mathema

31、tics (ERCIM), and Keio University, Japan. Windows is a registered trademark of Microsoft Corporation. IEC 61671-4:2016 IEEE Std 1671.4-2014 - vi -I(,ntroduction This introduction is not part of IEEE Std 1671.4-2014, IEEE Standard for Automatic Test Markup Language (ATML) Test Configuration. This chi

32、ld, or “dot” standard, also known as an automatic test markup language (ATML) component standard, provides for the definition of the TestConfiguration XML schema and contains references to an example. The XML schema and example that accompany this standard provide for the identification of all of th

33、e hardware, software, and documentation that is required to test and diagnose a unit under test (UUT) on an automatic test system (ATS). ATMLs XML schemas define the basic information required within any test application and provide a vehicle for formally defining the test environment by defining a

34、class hierarchy corresponding to these basic information entities and providing several methods within each to enable basic operations to be performed on these entities. ATML component standards within the ATML framework define the particular requirements within the test environment. IEC 61671-4:201

35、6 IEEE Std 1671.4-2014- vii -Important Notices and Disclaimers Concerning IEEE Standards Documents IEEE documents are made available for use subject to important notices and legal disclaimers. These notices and disclaimers, or a reference to this page, appear in all standards and may be found under

36、the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Standards Documents.” Notice and Disclaimer of Liability Concerning the Use of IEEE Standards Documents IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are devel

37、oped within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a consensus development process, approved by the American National Standards Institute (“ANSI”), which brings toge

38、ther volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and participate without compensation from IEEE. While IEEE administers the process and establishes rules to promote fairness in the consensus development

39、 process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contained in its standards. IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and expressly disclaims all warr

40、anties (express, implied and statutory) not included in this or any other document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of mater

41、ial. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to pro

42、duce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments receiv

43、ed from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizi

44、ng any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LI

45、ABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIA

46、BILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves

47、the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. IEC 61671-4:2016 IEEE Std 1671.4-2014 - viii -Official statements A statement, written or oral, that is not processed

48、 in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational cours

49、es, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form