IEC 62605-2016 Multimedia systems and equipment - Multimedia e-publishing and e-books - Interchange format for e-dictionaries《多媒体系统和设备.多媒体电子出版和电子书.电子词典的交换格式》.pdf

《IEC 62605-2016 Multimedia systems and equipment - Multimedia e-publishing and e-books - Interchange format for e-dictionaries《多媒体系统和设备.多媒体电子出版和电子书.电子词典的交换格式》.pdf》由会员分享，可在线阅读，更多相关《IEC 62605-2016 Multimedia systems and equipment - Multimedia e-publishing and e-books - Interchange format for e-dictionaries《多媒体系统和设备.多媒体电子出版和电子书.电子词典的交换格式》.pdf（238页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62605 Edition 2.0 2016-02 INTERNATIONAL STANDARD Multimedia systems and equipment Multimedia e-publishing and e-books Interchange format for e-dictionaries IEC 62605:2016-02(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise

2、 specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any question

3、s about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 inf

4、oiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publica

5、tions is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International

6、Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,).

7、 It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.elect

8、ropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glo

9、ssary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc

10、If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 62605 Edition 2.0 2016-02 INTERNATIONAL STANDARD Multimedia systems and equipment Multimedia e-publishing and e-books Interchange format for e-dictionaries

11、INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.160.60; 35.240.20; 35.240.30 ISBN 978-2-8322-3102-9 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 IEC 62605:2016 IEC 2016 CONTENTS FOREWORD

12、 . 5 INTRODUCTION . 7 1 Scope 8 2 Normative references. 8 3 Terms and definitions 8 4 Position and requirements for interchange format for e-dictionaries 8 4.1 Interchange format for e-dictionaries in contents creation/distribution model . 8 4.2 Requirements for interchange format for e-dictionaries

13、. 9 5 File formats . 9 6 Semantics . 10 Annex A (normative) XMDF-LeXML format . 11 A.1 General . 11 A.2 Overview of the formats structure . 11 A.3 Elements and attributes . 12 A.3.1 General . 12 A.3.2 Page_ID 12 A.3.3 Object_ID 12 A.3.4 Char_ID . 12 A.3.5 Reading . 12 A.3.6 Filename 13 A.3.7 Standar

14、d character 13 A.3.8 Standard character string . 13 A.3.9 Extended character 14 A.3.10 Extended character string . 14 A.3.11 External character 14 A.3.12 External character string 16 A.3.13 External extended character string . 16 A.3.14 Coordinates . 16 A.3.15 Polygonal_region . 17 A.3.16 Color . 17

15、 A.3.17 Date 18 A.3.18 Time 18 A.3.19 Country 18 A.3.20 Personal_name 18 A.3.21 Organization_name 20 A.3.22 Address . 20 A.3.23 Permission . 22 A.3.24 Keyword 24 A.3.25 Telephone_number 24 A.3.26 Mail_address . 25 A.4 Description format details 25 A.4.1 General . 25 A.4.2 Book information modules .

16、26 A.4.3 Content management module 41 A.4.4 Event info module . 59 IEC 62605:2016 IEC 2016 3 A.4.5 Parts data module 66 A.4.6 Object instances 72 A.5 Available color names . 119 A.6 Localization. 120 A.6.1 Possible additions 120 A.6.2 Standard characters . 120 A.6.3 Characters usable for reading 121

17、 A.6.4 Line breaking methods . 121 A.6.5 Sorting rules for 122 A.6.6 Additional attributes for 123 A.6.7 Normalization methods for . 124 A.6.8 Character encoding conversions . 124 A.7 Adaptation 124 A.8 Specification of the XMDF-LeXML format in the RELAX NG syntax 124 Annex B (normative) LeXML forma

18、t 160 B.1 General . 160 B.2 Elements for content structure . 160 B.2.1 Parameter entity definition 160 B.2.2 Root elements 162 B.2.3 headword-related elements 166 B.2.4 Main-text related elements . 169 B.2.5 Subheadword related elements 174 B.2.6 Other block elements . 178 B.2.7 Media related elemen

19、ts 182 B.2.8 Other structural elements . 184 B.3 Inline elements 190 B.3.1 Labels . 190 B.3.2 pronunciation/accent related elements . 192 B.3.3 Part-of-speech related and other elements . 194 B.3.4 Other dictionary-specific elements 195 B.3.5 Text-decoration related elements 205 B.3.6 Typesetting-re

20、lated elements . 210 B.3.7 Other elements 213 B.4 Specification of the LeXML format in the DTD syntax . 220 Bibliography . 234 Figure 1 Contents creation/distribution model . 8 Figure 2 Contents creation/distribution model (modified) . 9 Figure 3 Relationship between concepts . 9 Figure A.1 XML tree

21、 structure 11 Figure A.2 Example of valign=“middle“ . 74 Figure A.3 Example of dropped capital . 80 Figure A.4 Left and right margin of a paragraph 80 Figure A.5 Horizontal writing in vertical text 88 Figure A.6 Ruby . 89 Figure A.7 Example of search page object instance rendering . 115 4 IEC 62605:

22、2016 IEC 2016 Table A.1 Base characters for reading 13 Table A.2 Standard character set . 13 Table A.3 Usable characters for a telephone number 25 Table A.4 Characters usable for email addresses . 25 Table A.5 Characters usable for the lookup key 58 Table A.6 Color names . 120 Table A.7 Examples of

23、additional standard character sets . 121 Table A.8 Example of additional characters usable for readings 121 Table A.9 Example of additional sorting rules . 122 Table A.10 Example of additional language specific attributes for . 123 IEC 62605:2016 IEC 2016 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION

24、_ MULTIMEDIA SYSTEMS AND EQUIPMENT MULTIMEDIA E-PUBLISHING AND E-BOOKS INTERCHANGE FORMAT FOR E-DICTIONARIES FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees).

25、The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Spec

26、ifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)“). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizatio

27、ns liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters

28、 express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National C

29、ommittees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC Na

30、tional Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself do

31、es not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they h

32、ave the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature what

33、soever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced public

34、ations is indispensable for the correct application of this publication. International Standard IEC 62605 has been prepared by technical area 10: Multimedia e- publishing and e-book technologies, of IEC technical committee 100: Audio, video and multimedia systems and equipment. This second edition c

35、ancels and replaces the first edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition. a) Ref element is added to facilitate cross reference between entries. b) A new version of L

36、eXML format, which is one of the base formats of the first edition, has been expanded and becomes Annex B. (The existing format becomes Annex A.) 6 IEC 62605:2016 IEC 2016 The text of this standard is based on the following documents: CDV Report on voting 100/2430/CDV 100/2506/RVC Full information o

37、n the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stabi

38、lity date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IEC 62

39、605:2016 IEC 2016 7 INTRODUCTION Markets for multimedia e-books and e-publishing require standardization of formats for e-book data interchange among associated people, authors, data preparers, publishers and readers. The formats are classified into submission format, interchange format and readers

40、format. The submission format supports an interaction between authors and data preparers. The readers format depends on e-publishing equipment. The interchange format provides an interchange format for data preparers and publishers and therefore should be e-publishing equipment independent. The Inte

41、rnational Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of patents. IEC takes no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has assured the IEC th

42、at he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. Information may be obtained from: Sharp Corporation, 22-22 Nagaike-c

43、ho, Abeno-ku, Osaka 545-8522, Japan Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. IEC shall not be held responsible for identifying any or all such patent rights. ISO (www.iso.org/patents) and I

44、EC (http:/patents.iec.ch) maintain on-line data bases of patents relevant to their standards. Users are encouraged to consult the data bases for the most up to date information concerning patents. 8 IEC 62605:2016 IEC 2016 MULTIMEDIA SYSTEMS AND EQUIPMENT MULTIMEDIA E-PUBLISHING AND E-BOOKS INTERCHA

45、NGE FORMAT FOR E-DICTIONARIES 1 Scope This International Standard specifies the interchange format for e-dictionaries among publishers, content creators and manufacturers. This International Standard does not address the following aspects: data formats for reading devices; elements necessary for fin

46、al print reproduction only; rendering issues related to physical devices; security issues such as DRM for documents. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only

47、the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC TS 62229:2006, Multimedia systems and equipment Multimedia e-publishing and e-book Conceptual model for multimedia e-publishing 3 Terms and definitions For the pur

48、poses of this document, the following terms and definitions apply. 3.1 manufacturer organization or person that manufactures hardware and/or software of the e-book 4 Position and requirements for interchange format for e-dictionaries 4.1 Interchange format for e-dictionaries in contents creation/dis

49、tribution model The conceptual model for multimedia e-publishing (IEC TS 62229) defines a contents creation/distribution model shown in Figure 1. Author Data preparer Publisher -(3) Reader IEC Key (1) content data in submission format (2) content data in interchange format (3) content data in readers format Figure 1 Contents creation/distribution model IEC 62605:2016 IEC 2016 9 It should be noted that the role of manufacturers of e-di