SANS 301021-2005 Fixed Radio Systems Point-to-multipoint equipment Time Division Multiple Access (TDMA) Point-to-multipoint digital radio systems in frequency bands in the range 3 .pdf

《SANS 301021-2005 Fixed Radio Systems Point-to-multipoint equipment Time Division Multiple Access (TDMA) Point-to-multipoint digital radio systems in frequency bands in the range 3 .pdf》由会员分享，可在线阅读，更多相关《SANS 301021-2005 Fixed Radio Systems Point-to-multipoint equipment Time Division Multiple Access (TDMA) Point-to-multipoint digital radio systems in frequency bands in the range 3 .pdf（39页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ICS 33.060.30 ISBN 0-626-17409-0 SANS 301021:2005Edition 1ETSI EN 301021:2003Edition V.1.6.1SOUTH AFRICAN NATIONAL STANDARD Fixed Radio Systems; Point-to

4、-multipoint equipment; Time Division Multiple Access (TDMA); Point-to-multipoint digital radio systems in frequency bands in the range 3 GHz to 11 GHz This national standard is the identical implementation of ETSI EN 301021:2003 and is adopted with the permission of the European Telecommunications S

5、tandards Institute. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 301021:2005 Edition 1 ETSI EN 301021:2003 Edition V.1.6.1 Table of changes C

6、hange No. Date Scope Abstract Covers equipment, which may operate in frequency bands that have paired frequencies, which can be used by either equipment employing Frequency Division Duplex (FDD) or Time Division Duplex (TDD) techniques. Keywords DRRS, multipoint, radio, TDMA, transmission. National

7、foreword This South African standard was approved by National Committee StanSA TC 74, Communication technology, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. In South Africa, spectrum band plans are regulated by the Independent Communic

8、ations Authority of South Africa (ICASA). The South African Table of Frequency Allocations is obligatory for South Africa and will override any reference to frequency ranges as mentioned in this standard. ETSI EN 301 021 1.6.1 p003-07) European Standard (Telecommunications series) Fixed Radio System

9、s; Point-to-multipoint equipment; Time Division Multiple Access (TDMA); Point-to-multipoint digital radio systems in frequency bands in the range 3 GHz to 11 GHz ETSl EN 301 021 V1.6.1 (2003-07) Reference REN/TM-04146 Keywords DRRS, multipoint, radio, TDMA, transmission ETSl 650 Route des Lucioles F

10、-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association a but non lucratif enregistree a la Sous-Prefecture de Grasse (06) No 7803188 Important notice Individual copies of the present document can be downloaded from: ht

11、tp:i!www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the

12、 printing on ETSl printers of the PDF version kept on a specific network drive within ETSl Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSl documents is available at h

13、ttp:!portal.etsi.orq!tbis:atus!stalus.asp If you find errors in the present document, send your comment to: editoretsi.orq Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O E

14、uropean Telecommunications Standards Institute 2003. All rights reserved. DECT, PLUGTESTS and UMTS are Trade Marks of ETSl registered for the benefit of its Members. TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSl for the benefit of its Members. 3GPpT“ is a Trade Mark o

15、f ETSl registered for the benefit of its Members and of the 3GPP Organizational Partners. Contents Intellectual Property Rights 5 . Foreword 5 Introduction 5 1 Scope 7 . 1.1 Applications 7 . 1.2 Frequencies 7 1.3 Access method 7 2 References 8 . 3 Definitions. symbols and abbreviations 10 3.1 Defini

16、tions 10 3.2 Symbols 10 . 3.3 Abbreviations 11 . 4 General system architecture 12 4.1 Sub-system types 12 4.2 System characteristics 13 4.2.1 System capacity 13 4.2.2 Transmission error performance . 13 4.2.3 Round trip delay for speech services 14 4.2.4 Transparency . 14 . . . 4.2.5 Synchronization

17、 14 5 Radio characteristics . 14 5.1 Frequency bands . 14 5.2 Proposed channel arrangements . 15 5.3 Transmitter (tx) characteristics . 16 5.3.1 Tx power range . 16 5.3.2 Automatic Transmit Power Control (ATPC) 16 5.3.3 Spectrum masks 16 5.3.3.1 Spectrum density mask 16 5.3.3.2 Discrete CW component

18、s exceeding the spectrum mask limit (all stations) . 23 . . . 5.3.4 Transmitter spurious emlsslons 24 . . 5.3.4.1 Spurious emlsslons - external 24 . . 5.3.4.2 Spurious elnlssions - internal 24 5.3.5 Radio frequency tolerance 25 5.4 Receiver characteristics 25 5.4.1 Input level range . 25 . . . 5.4.2

19、 Spurious emissions 25 5.4.2.1 Spurious emissions - external 25 . . 5.4.2.2 Spurious emissions - internal 25 5.4.3 Bit Error Rate (BER) performance . 25 . . 5.4.4 Interference sensitivity 27 . 5.4.4.1 Adjacent channel interference 27 5.4.4.1.1 All system types excluding HC . 27 5.4.4.1.2 System type

20、 HC . 27 5.4.4.2 Go-channel interference 28 5.4.4.2.1 All system types excluding HC . 28 5.4.4.2.2 System type HC . 28 5.4.4.3 CW interference 28 . 5.4.5 Equipment Residual BER (RBER) 28 . . 5.4.6 Image frequency relectlon 29 . 5.5 Antenna port characteristics 29 5.5.1 RF interface 29 5.5.2 Return l

21、oss 29 6 Types of user equipment and service node interfaces 29 7 Power supply and environmental characteristics . 30 7.1 Power supply 30 7.2 Environmental conditions . 30 7.2.1 Equipment within weather protected locations . 30 7.2.2 Equipment for non-weather protected locations . 30 . . 7.3 Electro

22、Magnetic Compatibility (EMC) conditions 30 . Annex A (normative): System type codes for regulatory procedures 31 . Annex B (informative): Example of calculated performance against tabulated values 34 Annex C (informative): Bibliography . 35 History 36 Intellectual Property Rights IPRs essential or p

23、otentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs. if any: is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 3 14: “Irztellectual Properh Riglzts (1PRsj; Esserztial, or potentially Ess

24、ential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (hp:l/u.cbanp.etsi.reIPRhonc.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches. has been carried out by ETSI. N

25、o guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 3 14 (or the updates on the ETSI Web server) which are, or may be. or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technica

26、l Committee Transmission and Multiplexing (TM). National transposition dates Date of adoption of this EN: 4 July 2003 Date of latest announcement of this EN (doa): 3 1 October 2003 Date of latest publication of new National Standard or endorsement of this EN (dople): 30 April 2004 Date of withdrawal

27、 of any conflicting National Standard (dow): 30 April 2004 Introduction The main field of application of Point-to-Multipoint (P-MP) systems is to provide access to both public and private networks (Public Switched Telephone Networks (PSTN), Private Data Networks (PDN). By means of P-MP systems the n

28、etwork service area may be extended to cover both distant and scattered user locations and the systems may be applied to build new access networks covering both urban and rural areas. Users are offered the full range of services by the particular public or private network. Users have access to these

29、 services by means of the various standardized user network interfaces (2 wire loop. new data services and Integrated Services Digital Network (ISDN) ranging from basic rate to n x primary rate). P-MP systems provide standard network interfaces and transparently connect users to the appropriate netw

30、ork node. These systems allow a service to be connected to a number of users ranging from a few to several thousands and over a wide range of distances. P-MP systems are generally configured as Pre-Assigned Multiple Access (PAMA) radio systems or as Demand Assigned Multiple Access (DAMA) radio syste

31、ms. The essential features of a typical P-MP radio system are: - efficient use of the radio spectrum: - concentration: - transparency. Radio is often the ideal way of obtaining communications at low cost and almost independent of distance. and over difficult topography. Moreover. a small number of s

32、ites are required for these installations, thus facilitating rapid implementation and minimizing maintenance requirements of the systems. Concentration means that “mu users can share “n“ radio channels (m being larger than n). allowing a better use to be made of the available frequency spectrum and

33、at a lower equipment cost. The term “multi-access“ derives from the fact that every user has access to every channel (instead of a fixed assignment as in most multiplex systems). When a demand arises an available channel (or channels) is allocated to it. When the demand is terminated, the channel is

34、 released for other use. Concentration requires the use of distributed intelligent control, which in turn allows many other operation and maintenance functions to be added. Transparency means that the network node and the user terminal communicate with each other without being aware of the radio pat

35、h. Efficient use of the radio spectrum is generally achieved by reusing frequency sets at base stations in a cellular pattern. 1 Scope The present document covers equipment, which may operate in frequency bands that have paired frequencies. which can be used by either equipment employing Frequency D

36、ivision Duplex (FDD) or Time Division Duplex (TDD) techniques. For use with Time Division Duplex only one frequency of the frequency pair will be used and for the purpose of the present document the tdrx separation will be zero. The channel spacing is intended to be the same in downlink and uplink d

37、irections. This revision extends the scope to cover systems employing basically TDMA multi-access but which also allows for additional methods (such as OFDMA) combined with TDMA. to be used to provide another dimension of multiple access. Applications The present document specifies the minimum and o

38、ptional requirements for system parameters of Time Division Multiple Access (TDMA) Point-to-Multipoint (P-MP) Radio Systems in the terrestrial Fixed Service operating in frequency bands in the range 3 GHz to 11 GHz. The present document covers the following typical Point-to-Multipoint (P-MP) applica

39、tions: - voice; - fax: voice-band data: - telex, related to analogue interfaces; - data up to 64 kbit/s or beyond with optional interfaces; - ISDN; - digital video; - digital audio, related to digital interfaces. Radio terminals from different manufacturers are not intended to inter-work at radio fr

40、equency (i.e. no common air interface). The present document defines the requirements of radio terminal and radio-relay equipment including the interfaces The requirements for multiplex, network management and antenndfeeder equipment may be addressed elsewhere. Testing to the present document will b

41、e undertaken with the guidance of a generic test methods document EN 301 126-2-1 22, EN 301 126-2-3 23 and EN 301 126-3-2 24. 1.2 Frequencies The present document covers fixed P-MP services operating in the 3,5 GHz, 3,7 GHz and 10,5 GHz bands, having the frequency plans as given in CEPTIERC Recommen

42、dations 14-03 7. 12-08 25, 12-05 8 and in ITU-R Recommendation F. 149 1 34. Access method The present document covers Time Division Multiple Access (TDMA) systems. Optionally. for certain of the system types defined in the present document. other access methods (e.g Orthogonal Frequency Division Mul

43、tiple Access (OFDMA) may be used in conjunction with TDMA to provide another dimension of multiple access. References The following documents contain provisions which. through reference in this text, constitute provisions of the present document. References are either specific (identified by date of

44、 publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at h

45、ttr,:/docbox.etsi.org/Reference. I1 ETSI EN 300 012-1: “ Integated Services Digital Network (ISDN); Basic User-Network Interface (UNI): Part 1: Layer 1 specification“. 21 ITU-T Recommendation G.703: “Physical/electrical characteristics of hierarchical digital interfaces“. 131 ITU-T Recommendation Q.

46、553: “Transmission characteristics at 4-wire analogue interfaces of digital exchanges“. C41 ITU-T Recommendation Q.552: “Transmission characteristics at 2-wire analogue interfaces of digital exchanges“. 5l ITU-T Recommendation G.82 1 : “Error performance of an international digital connection operat

47、ing at a bit rate below the primary rate and forming part of an integrated services digital network“. 161 ITU-T Recommendation R.20: “Telegraph modem for subscriber lines“. 71 CEPTERC Recommendation 14-03: “Harmonised radio frequency channel arrangements for low and medium capacity systems in the ba

48、nd 3400 MHz to 3600 MHz“. 181 CEPTERC Recommendation 12-05: “Harmonised radio frequency channel arrangements for digital tcrrcstrial fixed systems operating in the band 10,0 - 10,68 CHz“. LI ETSI EN 300 019-1: “Equipment Engineering (EE); Environmental conditions and environmental tests for telecomm

49、unications equipment; Sub-parts 1 - 1 to 1-7: Classification of environmental conditions“. lo ETSI EN 300 01 9-2: “Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Sub-parts 2-1 to 2-7: Specification of environmental tests“. 1111 ETSI ETS 300 132 (Parts 1 and 2): “Equipment Engineering (EE): Power supply interface at the input to telecommunications equipment; Part 1 : Operated by alternating current (ac) derived from direct current (dc) sources; Part 2: Operated by direct current (dc)“. I