NAVY MIL-F-82129 B-1979 FUEL SYSTEM AMPHIBIOUS ASSAULT AND TACTICAL AIRFIELD DISPENSING《两栖攻击和战术飞机场分配燃油系统》.pdf

《NAVY MIL-F-82129 B-1979 FUEL SYSTEM AMPHIBIOUS ASSAULT AND TACTICAL AIRFIELD DISPENSING《两栖攻击和战术飞机场分配燃油系统》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-F-82129 B-1979 FUEL SYSTEM AMPHIBIOUS ASSAULT AND TACTICAL AIRFIELD DISPENSING《两栖攻击和战术飞机场分配燃油系统》.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、- MIL-F-82L27B 47 m 7779706 0257046-7 m 19 January 1979 SUPERSEDING MI L-F- 82129A(MC) 21 May 1968 MILITARY SPECIFICATION FUEL SYSTEMS, AMPHIBIOUS ASSAULT AND TACTICAL AIRFIELD DISPENSING: GENERAL SPECIFICATION FOR This specification is approved for use by U.S. Marine Corps, Department of the Navy,

2、and is available for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers assemblies and components of 4- and 6-inch portable amphibious assault fuel systems and tactical air- field fuel dispensing systems. 1.2 Classification. The fuel syste

3、ms shall be of the following types as specified in 3.3, 6.2.1, and 6.9: Type I. Type II. 2. APPLICAB - Amphibius Assault Fuel System (AAFS). - Tactical Airfield Fuel Dispensing (TAFDS) . ,E DOCUMENTS System n 2.1 Issues of documents. The following documents of the issue effect on date of invitation

4、for bids or requests for proposal form a part of this specification to the extent specified herein: Beneficial comments (recommendations, additions, deletions) and any per- tinent data which may be of use in improving this document should be addressed to: Commandant of the Marine Corps, Headquarters

5、 Marine Corps, Code LMA-1, Washington, D.C. 20380 by using the self-addressed Standard- ization Document Improvement Proposal (DD Form 1426) appearing at the end of this document;or by letter. FSC 4930 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

6、MIL-F-82129B (MC) SPECIFICATIONS FEDERAL W- C- 44 O W -Ru 550 QQ-S- 781 VV-F- 800 PPP-B-601 PPP-B-621 PPP-B-636 PPP-P- 40 MILITARY MIL-V-3 MIL-C-104 W I L- P - 11 6 MIL-V- 173 MIL-P-236 MIL-H- 370 MIL- P- 5 14 MIL-T- 704 MIL-P- 775 MIL-L-2104 MIL-D- 2940 MI L- G - 305 6 MIL-F-3541 MIL-e- 3774 MIL- G

7、 - 3 85 9 - Clips, Electrical, General Speci- - Rod, Ground (With Attachments). - Strapping, Steel, and Seals. - Fuel Oil, Diesel. - Boxes, Wood, Cleated-Plywood. - Boxes, Wood, Nailed and Lock-Corner. - Boxes, Shipping, Fiberboard. - Packaging and Packing of Hand Tools. fication for. - Valves, Fitt

8、ings, and Flanges (Except for Systems Indicated Herein); Packaging of. Sheathed, Nailed and Bolted. - Crates, Wood; Lumber and Plywood - Preservation-Packaging, Methods of. - Varnish, Moisture- and-Fungus- Resistant (for Treatment of Communi- cations, Electronic, and Associated Equipment). Liquid Fu

9、el, Noncollapsible. and Marking, Blank. Rubber, Plastic, Fabric, or Metal (Including Tubing); and Fittings, Nozzles, and Strainers. - Lubricating Oil, Internal Combustion Engine, Tactical Service. - Dampeners, Fluid Pressure, Gage Protection. - Gasoline, Automotive, Combat. - Fittings, Lubrication.

10、- Crates, Wood; Open 12,000- and - Grease Guns, Hand-Operated, Lever, - Pipe, Culvert, Nestable. - Hoses and Hose Assemblies, Rubber, - Plates, Identification, Instruction - Treatment and Painting of Materiel. - Packaging of Hose, Hose Assemblies; 16,000-Pound Capacity. Push and Screw Type. Provided

11、 by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- VIL-F-82127B MI L-G - 5572 MIL-T-5624 MIL-S-7916 MIL-H-8794 MIL-E- 10062 MIL-G-10924 MI L-P- 15024 MIL-P- 15024/9 MIL- L- 21 260 MIL-C-23044 MIL-G-23827 MIL-C-45150 MI L-A- 46 15 3 MIL- L- 46167 MIL-F- 52308 M

12、IL-F- 52666 MIL-E-52798 MIL-V-58039 MIL-M-82002 MIL-T- 82123 MI L-H- 821 2 7 MIL-F-82165 MIL-M- 82180 MIL-S-82183 47 7977706 02570482 M= - Gasoline, Aviation: Grades 80/87, 100/130, 115/145. - Turbine Fuel, Aviation, Grades JP-4 and JP-5. - Sealing Compound, Thread and Gas- ket, Fuel, Oil, and Water

13、 Resistant. Oil Resistant, and Storage of. - Hose, Rubber, Hydraulic, Fuel, and - Engines: Preparation for Shipment - Grease, Automotive and Artillery. - Plates, Tags and Bands for Identi- fication of Equipment. - Aircraft Loading Dataplate. - Lubricating Oil, Internal Combus- tion Engine, Preservat

14、ive and Break- In. - Chest, Collapsible Tank. - Grease, Aircraft and Instrument, - Chassis, Trailer, 2-Whee1, Cart - Antifreeze, Ethylene Glycol, Gear and Actuator Screw. Type, 1/4 to 3 1/2 Ton. Inhibited; Heavy Duty, Single Package. - Lubricating Oil, Internal Combus- tion Engine, Arctic. - Filter

15、Element, Fluid Pressure. - Filter-Separator, Liquid Fuel: Frame Mounted, 350 GPM Capacity. - Enamel, Alkyd, Camouflage. - Valves, Gate, Rising Stem, Double - Manifold and Accessory Assemblies, Acting, Aluminum. Portable Fuel Distribution Systems, Quick-Disconnect Hose Coupling Type. - Tank, Fabric,

16、Collapsible: 20,000 Gallon, Petroleum. - Hose Assembly, Rubber (Synthetic) : Fuel, Discharge, Col lapsib le. - Fuel Monitor Assembly: Per Minute, Skid-Mounted. - Meter Assemblies, Skid-Mounted: Petroleum Fuels. - Strainer Assembly, Petroleum Fuels: 6-Inch, Frame-Mounted, 600 Gallons Per Minute. 600

17、Gallons 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-F-82329B 47 a 3977906 0257049 a MIL-F-82129B (MC) MIL-R-82184 MI L-F - 821 9 1 STANDARDS MI LI TARY MI L-STD- 105 MIL-STD- 129 MIL-STD- 130 MIL-STD- 209 MI L-STD- 461 MIL-STD- 462 M IL-STD

18、- 1186 MIL-STD- 11 88 MIL-STD- 1400 MIL-STD-1410 MI L-STD-14 72 MS27023 MS2 7 O 2 7 MS2 7 O 2 8 MC27029 MS2 7 1 8 3 - Regulator Assembly, Skid-Mounted: - Fuel Hose Evacuation Kits. 6- Inch. - Sampling Procedures and Tables for Inspection by Attributes. - Marking for Shipment and Storage. - Identific

19、ation Marking of US Military Property. - Slinging and Tiedown Provisions for Lifting and Tying Down Military Equipment. - Electromagnetic Interference Charac- teristics Requirements for Equipment. - Electromagnetic Interference Char- acteristics, Measurement of. - Cushioning, Anchoring, Bracing, Blo

20、cking, and Waterproofing, With Appropriate Test Methods. - Commercial Packaging of Supplies and Equipment. - Engines, Gasoline and Diesel, Methods of Tes t. - Methods for Selection of Industrial Engines for End Item Application. - Human Engineering Design Criteria for Military Systems, Equipment and

21、 Facilities. - Coupling Half, Quick Disconnect, Cam-Locking Type, Male, Flanged, Type IV. - Coupling Half, Quick Disconnect, Cam-Locking Type Female, Flanged, Type VIII. - Coupling Half, Quick Disconnect, Cam-Locking Type, Cap, Dust, Type IX. - Coupling Half, Quick Disconnect, Cam-Locking Type, Plug

22、, Dust, Type X. - Washer, Flat-Round, Steel, Cadmium Plated, General Purpose (in. /mm) . 4 “ a c Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS3 5 338 MS35643 MS35644 MS35645 MS35829 MS5 1967 MS53028 MS87006 MS9072 5 DRAW1 NGS U.S. MARINE CORPS D

23、L7 7C 5 2 O 8A0 O00 DL77C5209A0000 MIL - F - 8 2 1 2 9 B (MC) - Washer, Lock-Spring, Helical, Regu- lar (Medium) Series, (in./mm). - Gasket: Synthetic Rubber, Cap, Fuel Tank. - Filler Neck: Fuel Tank-Military Vehicles. - Cap, Fuel Tank: Fording. - Hinge, Butt, Continuous (Piano) ,075 Thickness, .187

24、 15 .250 Pin Dia. - Nut, Plain, Hexagon-Carbon Steel, Cadmium Plated, UNC-2B (in./mm). - Chassis, Trailer: 3/4 Ton, 2 Wheel, Military Design, M116A1. - Hook, Chain-S. - Screw, Cap, Hexagon- Head (Finished Hexagon Bolt), Steel, Grade 5, Cadmium Plated, UNC-2A. Tactical Vehicle, - Amphibious Assault F

25、uel System. - Tactical Airfield Fuel Dispensing System. (Copies of specifications, standards, and drawings required by con- tractors in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer . ) 2.2 Other publications.

26、The following documents form a part of this specification to the extent specified herein. Unless otherwise indicated, the issue in effect on the date of invitation for bids or request for proposals shall apply. AMERICAN NATIONAL STANDARDS INSTITUTE, INC. (ANSI) ANSI B40.1 - Gauges - Pressure and Vac

27、uum, Indicating Dial Type- Elastic Element. (Application for copies should be addressed to the American National Standards Institute, Inc., 1430 Broadway, New York, NY 10018.) 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-0257051 2 MIL-F-82129B (

28、MC) AMERICAN SOCIETY FOR TESTIN AND MATERIALS (,SR.I) STANDA m DS ASTM B 173 - Rope-Lay-Stranded Copper Conductors Having Concentric- Stranded Members, for Electrical Conductors. (Application for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadel

29、phia, PA 19103.) HYDRAULIC INSTITUTE Hydraulic Institute Standards. (Application for copies should be addressed to the Hydraulic Insti- tute, 2130 Keith Building, Cleveland, OH 44115.) NATIONAL BUREAU OF STANDARDS (NBS) Handbook H28 - Screw-Thread Standards for Federal Services. Application for copi

30、es should be addressed to the Superintendent of Documents, Government Printing Office, Washington, D.C 20402.) SOCIETY OF AUTOMOTIVE ENGINEERS (SAE) SAE Handbook. (Application for copies should be addressed to the Society of Auto- motive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096.) (Tec

31、hnical society and technical association specifications and standards are generally available for reference from libraries. are also distributed among technical groups and using Federal agencies.) They 3. REQUIREMENTS 3.1 First article. When specified (see 6.2.1), the contractor shall furnish a samp

32、le system(s), assembly(ies), or component(s) for first article inspection and approval (see 4.4 and 6.3). 3.2 Material. Material shall be as specified herein and as shown on tho applicable drawings. by the contractor and shall be subject to all provisions of this speci- fication (see 6.5). 3.3 Desig

33、n and construction. The fuel receiving, storing, and dis- pensing systems shall be in accordance with the Data Lists DL77C5208A0000 for type I and DL77C5209A0000 for type II (see 1.2, 3.3, and 6.9) and as Material not specified shall be selected Provided by IHSNot for ResaleNo reproduction or networ

34、king permitted without license from IHS-,-,-NIL-F-ZL27B LI9 7779706 0257052 4 W MIL-F-82129B (MC) specified herein. ation from the prescribed dimensions or tolerances is permissible without prior approval of the contracting officer. cumulatively result in incorrect fits, the contractor shall provide

35、 tolerances within those prescribed on the drawings to insure correct fit, assembly, and operation of the system(s), assembly(ies), or component(s). Any data (e. g. , shop drawings, layouts, flow sheets, prokessing procedures, etc.) prepared by the contractor or obtained from a vendor to support fab

36、rication and manufacture of the production item shall be made avail- able, upon request, for inspection by the contracting officer or his designated representative. The following general requirements shall These drawings are end product drawings and no devi- Where tolerances could apply: a. Type I A

37、mphibious Assault Fuel System (AAFS). The type I AAFS is an assemblage of components and accessories having a nominal storage capacity of 600,000 gallons of fuel in collapsible fabric petroleum tanks. The system is configured normally for an ocean beach unloading area (see 1.2, 6.9, and Figure 1). T

38、he type II TAFDS is an assemblage of components and acces- sories having a nominal storage capacity of 120,000 gallons of fuel in collapsible fabric petroleum tanks. The system is configured for installation at a tactical airfield (see 1.2, 6.9, and Figure 1). b. Type II Tactical Airfield Fuel Dispe

39、nsing System (TAFDS). 3.3.1 Assemblies. 3.3.1.1 Fuel adapting assembly (FAA). Unless otherwise specified (see 6.2.1) , the FAA shall be furnished in accordance with the applicable drawings (ref. 77C5208A0027) and as specified herein. 3.3.1.2 Drum unloading assembly (DUA). Unless otherwise specified

40、(see 6.2.1), the DUA shall be furnished in accordance with the applicable drawings (ref. 77C5208A0030) and as specified herein. 3.3.1.3 Beach unloading assembly (BUA). Unless otherwise specified (see 6.2.1), the BUA shall be furnished in accordance with the applicable drawings (ref. 77C5208A0040) an

41、d as specified herein. 3.3.1.4 Fuel disp%nsing assembly (FDA). Unless otherwise specified (see 6.2.1), the FDA shall be furnished in accordance with the applicable _ drawings (ref. 77C5208A0050) and as specified herein. 3.3.1.5 Boost pump assembly (BPA). Unless otherwise specified (see 6.2.1), the B

42、PA shall be furnished in accordance with the applicable drawings (ref. 77C5208A0060) and as specified herein, 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MLL-F-Z129B Li9 9999906 02C7053 b MIL-P-82129B (MC) 3.3.1.6 - Tank farm assembly (TFA). Un

43、less otherwise specified (see 6.2.12. the TFA shall be furnished in accordance with the applicable - drawings (ref, 77C5208A0070) and as specified herein. 3.3.2 Components. 3.3.2.1 Fuel storage tank, chest, and emergency repair kit. Unless otherwise specified (see 6.2.1), the fuel storage tank, ches

44、t, and emergency repair kit in the quantity specified (see 6.2.1) shall be furnished in accordance with MIL-T-82123 and referenced applicable drawings, 3.3.2.2 Filter-separator. Unless otherwise specified (see 6.2.1), the 350-gallons-per-minute (gpm) filter-separator in the quantity speci- fied (see

45、 6.2.1) shall be furnished in accordance with MIL-F-52666 and referenced applicable drawings (ref. 97403-TA13217E9320). 3.3.2.3 Filter elements, Unless otherwise specified (see 6.2.1), the filter elements in the quantities specified (see 6.2.1) shall be fur- nished in accordance with MIL-F-52308. 3.

46、3.2.4 Fuel monitor assembly. Unless otherwise specified (see 6.2.1), the fuel monitor assembly in the quantity specified (see 6.2.1) shall be furnished in accordance with MIL-F-82165 and referenced applicable drawings. 3.3.2.5 Fuel meter assembly, Unless otherwise specified (see 6.2.1), a size 2- or

47、 3-inch fuel meter assembly in the size and quantity speci- fied (see 6.2.1) shall be furnished in accordance with ML-M-82180- and reerenced applicable drawings. 3.3.2.6 Fuel strainer assembly. Unless otherwise specified (see 6.2.1), the fuel strainer assembly in the quantity specified (see 6.2.1) s

48、hall be furnished in accordance with MIL-S-82183. 3.3.2.7 Pressure regulator assembly. Unless otherwise specified (see 6.2.1), the pressure regulator assembly in the quantity specified (see 6.2.1) shall be furnished in accordance with MIL-R-82184 and referenced applicable drawings. 3.3.2.8 Hose asse

49、mblies, - 3.3.2.8.1 Suction hose assembly. Unless otherwise specified (see 6.2,1), the fuel suction hose assembly in the length, size, and quantity specified (see 6.2.1) shall be furnished in accordance with MIL-H-370, type TI, class 1, style A, except that static wires shall not be included. 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-(3 VIL-F-82129B 49 9999