ITU-T Q 2991 2-1999 Abstract Test Suite for the Network Integration Testing for B-ISDN and B-ISDN N-ISDN ICS & IXIT and ATS Series Q Switching and Signalling Broadband ISDN - B-ISD《对.pdf

《ITU-T Q 2991 2-1999 Abstract Test Suite for the Network Integration Testing for B-ISDN and B-ISDN N-ISDN ICS & IXIT and ATS Series Q Switching and Signalling Broadband ISDN - B-ISD《对.pdf》由会员分享，可在线阅读，更多相关《ITU-T Q 2991 2-1999 Abstract Test Suite for the Network Integration Testing for B-ISDN and B-ISDN N-ISDN ICS & IXIT and ATS Series Q Switching and Signalling Broadband ISDN - B-ISD《对.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、INTERNATIONAL TELECOMMUNICATION UNION ITU-T TELECOM M U N I CAT I ON STANDARDIZATION SECTOR OF ITU Q.2991.2 (I 2/1999) SERIES Q: SWITCHING AND SIGNALLING Broadband ISDN - B-ISDN application protocols for access s ig na I I i ng Abstract test suite for the network integration testing for 9-ISDN and 9

2、-ISDNIN-ISDN: ICs all users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published. ITU-T Recommendation 4.

3、850 (1998), Usage of cause and location in the Digital Subscriber Signalling System No. 1 and the Signalling System No. 7 ISDN User Part. ITU-T Recommendation 4.93 1 (1 998), ISDN user-network interface layer 3 specification for basic call control. ITU-T Recommendation 4.955, Stage 3 description for

4、 community of interest supplementary services using DSSl. ITU-T Recommendation 4.2660 (1 999), Interworking between signalling system No. 7 broadband ISDN User Part (B-ISUP) and digital subscriber Signalling System No. 2. ITU-T Recommendation 4.293 1 (1 995), Digital Subscriber Signalling System No.

5、 2 (DSS2) - User-network Interface (UNg Layer 3 speciJication for basic call/connection control. ITU-T Recommendation 4.295 1, Stage 3 description for number identijkation supplementary services using B-ISDN Digital Subscriber Signalling system No. 2 (DSS2) - Basic call. ITU-T Recommendation 4.2957.

6、1 (1 995), Stage 3 description for additional information transfer supplementary services using B-ISDN Digital Subscriber Signalling System No. 2 (DSS2) - Basic Call: User-to-user signalling (UUS). ITU-T Recommendation 4.296 1.1 (1 995): Digital Subscriber Signalling System No. 2 - Additional Trafic

7、 Parameters: Additional signalling capabilities to support trafic parameters for the tagging option and the sustainable cell rate parameter set. ITU-T Recommendation 4.296 1.2 (1 997), Digital Subscriber Signalling System No. 2 - Additional Trafic Parameters: Support of ATM Transfer Capability in th

8、e Broadband Bearer Capability Information Element 2. ITU-T Recommendation 4.2962 (1 998), Digital Subscriber Signalling System No. 2 - Connection characteristics negotiation during call/connection establishment phase. 51 3 ITU-T Recommendation 4.297 1 (1 993, Digital Subscriber Signalling System No.

9、 2 (DSS2) - User-network interface layer 3 specification for point-to-multipoint callkonnection control. ISO/IEC 9646-1 : 1994, Information Technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts. ISO/IEC 9646-2: 1994, Information Technolo

10、gy - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Suite specification. ISO/IEC 9646-4: 1994, Information Technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 4: Test realization. ISOIIEC 9646-5:1994,

11、Information Technoloo? - Open Systems Interconnection - Conformance testing methodology and framework - Part 5: Requirements on test laboratories and clients for the conformance assessment process. Defin ition s This ITU-T Recommendations defines the following: o terms defined in the B-ISDN/ISDN ref

12、erence specifications 1-1 i; terms defined in ISO/IEC 9646-1 121 and in ISO/IEC 9646-2 13. o In particular, the following terms defined in ISO/IEC 9646- 1 121 apply: - Abstract Test Case; - PICS proforma; - Test Purpose. 4 Abbreviations This ITU-T Recommendation uses the following abbreviations: AAL

13、 ABR ATC ATM ATS BTC CLIP CLIR COLP COLR cs- 1 cs-2.1 CUG DBR DDI ATM Adaptation Layer Available Bit Rate ATM Transfer capability Asynchronous Transfer Mode Abstract Test Suite Broadband Transfer Capability Calling Line Identification Presentation Calling Line Identification Restriction Connected Li

14、ne Identification Presentation Connected Line Identification Restriction Capability Set 1 Capability Set 2.1 Closed User Group Deterministic Bit Rate Direct Dialling In DSS1 DSS2 HLC HLI ICs ISDN ISUP IUT IWU IXIT LLC LLI MOT MSN I NIT os1 PCO PDU PNO SBR SUB SUT TSS - global statement of conformanc

15、e. guidance for completing the proformas; Copyright release for ICs proforma Users of this Recommendation may freely reproduce the ICs proforma in this annex so that it can be used for its intended purpose, and may further publish the completed ICs. A.1.2 Abbreviations and conventions The ICs profor

16、ma contained in Annex B is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7. Item column The item column contains a number which identifies the item in the table. Item description column The item description column describes in free text each res

17、pective item (e.g. parameters, timers, etc.). It implicitly means 5s supported by the implementation?“. Status column The following notations, defined in ISOIEC 9646-7, are used for the status column: m O da X 0.i mandatory - the capability is required to be supported. optional - the capability may

18、be supported or not. not applicable - in the given context, it is impossible to use the capability. prohibited (excluded) - there is a requirement not to use this capability in the given context. qualified optional - for mutually exclusive or selectable options fi-om a set. “i“ is an integer which i

19、dentifies a unique group of related optional items and the logic of their selection which is defined immediately following the table. conditional - the requirement on the capability (“m“, “o“, “XI or “da“) depends on the support of other optional or conditional items. “i“ is an integer identifying a

20、n unique conditional status expression which is defined immediately following the table. ci Support column The support column shall be filled in by the network provider of the implementation. The following common notations, defined in ISOAEC 9646-7, are used for the support column: Y or y supported

21、by the implementation; N or n not supported by the implementation; N/A, da or - no answer required (allowed only if the status is da, directly or after evaluation of a conditional status). It is also possible to provide a comment to an answer in the space provided at the bottom of the table. Values

22、allowed column The values allowed column contains the type, the list, the range, or the length of values allowed. The following notations are used: range of values: list of values: example: 5 ,. 20 ex amp 1 e : , , . ., 2 74 96 ,8,9 example: example : OAH, 34H, 2FH example: reject(l), accept(2) exam

23、ple : llOlB, 101 1B, 1 11 1B list of named values: (),(), ., () length: size ( ) size (1 . 8) Values supported column The values supported column shall be filled in by the network provider of the implementation. In this column, the values or the ranges of values supported by the implementation shall

24、 be indicated. A.1.3 The network provider of the implementation shall complete the ICs proforma in each of the spaces provided. In particular, an explicit answer shall be entered, in each of the support or supported column boxes provided, using the notation described in subclause A. 1.2. If necessar

25、y, the network provider may provide additional comments in space at the bottom of the tables, or separately on sheets of paper. More detailed instructions may be given at the beginning of the different subclauses of the ICs profonna. Instructions for completing the ICs proforma A.2 Identification of

26、 the implementation Identification of the Implementation Under Test (KJT), the Integrated Services Digital Network provided by the public telecommunications operator, should be filled in so as to provide as much detail as possible regarding version numbers and configuration options. The product netw

27、ork provider information and client information should both be filled in if they are different. A person who can answer queries regarding infomation supplied in the ICs and IXIT should be named as the contact person. A.2.1 Date of the statement A.2.2 IUT name: IUT version: Implementation Under Test

28、(IUT) identification A.2.3 ICs contact person (A person to contact if there are any queries concerning the content of the ICs or IXIT) Name: Telephone number: Facsimile number: Email address: Additional information: A.3 Identification of the document This ICs proforma applies to the following standa

29、rds: ITU 4.2931 (1995), Digital Subscriber Signalling System No. 2 (DSS2) - User-Network Interface (UNI) layer 3 specification for basic call/connection control. ITU 4.2951 (1995), Stage 3 description for number identification supplementary services using B-ISDN Digital Subscriber Signalling System

30、No. 2 (DSS2) - Basic Call. ITU 4.2955.1 (1997), Supplementary services using B-ISDN Digital Subscriber Signalling System No. 2 (DSS2) - Closed User Group (CUG). ITU Q.2957.1 (1995), User-to-User Signalling (UUS). ITU Q.2961.2 (1997), Support of ATM transfer capability in the broadband bearer capabil

31、ity information element. ITU Q.2961.3 (1997), Signalling capabilities to support traffic parameters for the available bit rate (ABR) ATM transfer capability. ITU Q.2962 (1998), Digital Subscriber Signalling System No. 2 - Connection characteristics negotiation during call/connection establishment ph

32、ase. ITU Q.2963.1 (1999), Peak cell rate modification by the connection owner. ITU 4.2963.2 (1997), Modification procedures for sustainable cell rate parameters. ITU Q.2971 (1995): Broadband integrated services digital network (B-ISDN) - Digital Subscriber Signalling System No. 2 (DSS2) - User-netwo

33、rk interface layer 3 specification for point-to- multipoint caWconnection control. Other ITU Standards related to B-ISDN, DSS2 signalling, layer 3 testing. 1 2 A.4 Basic B-ISDN capabilities Physical layer access protocol conform to 1.432 1.432 m B-ISDN ATM layer access protocol conform to 1.361 1.36

34、1 m Table A.UQ.2991.2 - Access characteristics 3 B-ISDN ATM Adaptation Layer - AAL access 1.363 m 4 B-ISDN ATM Adaptation Layer - SSCOP access 4.2110 m protocol conform to 1.363 protocol conform to Q.2 1 1 O 5 Base standard 4.293 1 4.293 1 O 6 Overlap sending 6.514.293 1 O 7 Base standard ATM UNI 3.

35、1 UNI 3.1 O I Item I Access I Reference I Status Support Please specify any national deviations: Item Network 1 Functional description of the B-ISDN User Part (B-ISUP) of Signalling System No. 7; General functions of messages and signals of B-ISDN User Part (B-ISUP) of Signalling System No. 7 Table

36、A.3/Q.2991.2 - Bearer service Reference Status Support 4.2761 .Q. 2764 m Q.2721 .Q. 2726 4.2730 .Q. 2735 4.2660 Item Service Reference 1 Bearer service BCOB-A 4.5.7lQ.293 1 2 Bearer service BCOB-C 4.5.714.293 1 3 Bearer service BCOB-X 4.5.714.293 1 Status Support m m m Table A.YQ.2991.2 - Quality of

37、 service Item Service Reference 1 Peak cell rate for CLP = 0+1 4.5.614.293 1 2 Sustainable Cell Rate for CLP=O+l 4.2961 3 Maximum Burst Size for CLP=O+l Q.2961 4 Peak cell rate for CLP = O 4.5.614.293 1 5 Sustainable Cell Rate for CLP=O 4.2961 6 Maximum Burst Size for CLP=O 4.2961 Status Support m O

38、 O O O O Item 1 Service Reference Status Support Unspecified quality of service 4.5.1814.293 1 O Table A.6/Q.2991.2 - ATM adaptation layer Item 1 2 3 Service Reference Status Support AALtype1 4.5.5lQ.293 1 O AALtype5 4.5.514.293 1 O AAL for voice 4.5.5Q.293 I O Please specie any national deviations:

39、 OAM traffic descriptor - OAM F5 cells transported optionally Table A.7/Q.2991.2 - OAM traffic descriptor 4.5.2414.293 1 Status I Support 2 Item I OAM traffic descriptor descriptor - OAM F5 cells transported mandatory 4.5.2414.293 1 Service Item Service I Reference Reference Status Support Item 1 Se

40、rvice Reference Status Support ISOIEC 4.5.8lQ.2931 O OI 2 3 4 OI - User-Specific 4.5.8Q.2931 O Vendor-Specific Application Identifier 4.5.8lQ.293 1 O ITU-T SG 1 B-ISDN teleservice recommend. 4.5.8Q.2931 O Table A.WQ.2991.2 - End-to-end transit delay 1 I End-to-end transit delay 14.5.17Q.2931 I O Ple

41、ase specify any national deviations: Table A.9/Q.2991.2 - Connection Identifier I Item I Service 1 Reference Status I Support E I Connection identifier I4.5.16Q.2931 I o I Please specify any national deviations: Table A.lO/Q.2991.2 - Broadband High Layer Information type Item Service 1 User Info Lay

42、er 2 4.922; User Info Layer 3 X.25 User Info Layer 2 4.922; User Info Layer 3 X.25 User Info Layer 2 Q.922; User Info Layer 3 X.25 User Info Layer 2 4.922; User Info Layer 3 X.25 User Info Layer 2 Q.922; User Info Layer 3 X.25 Packet Layer Packet Layer; Packet size 1024; window size 7 Packet Layer;

43、Packet size 5 12; window size 3 Packet Layer; Packet size 2048; window size 63 Packet Layer; Packet size 1024; window size 63 2 3 4 5 I I Please specifi any national deviations: Reference Status Support 4.5.9lQ.293 1 O 4.5.9fQ.293 1 O 4.5.91Q.293 1 O 4.5.91Q.2931 O 4.5.9fQ.293 1 O Table A.12/Q.2991.

44、2 - N-ISDN services within B-ISDN Item Service 1 2 Call establishment for “3.1 kHz audio“ within B-ISDN Call establishment for “unrestricted digital information“ within B-ISDN Call establishment for “telephony“ within B-ISDN Call establishment for “videotelephony“ within Call establishment for “tele

45、fax G4“ within B-ISDN Call establishment for “telephony 7 kHz“ within Call establishment for “facsimile group 213“ within 3 4 B-ISDN 5 6 B-ISDN 7 B-ISDN Reference E.2.1lQ.2931.6 E.2.21Q.293 1.6 E.2.3lQ.293 1.6 E.2.4lQ.293 1.6 E.21Q.293 1.6 E.2fQ.293 1.6 E.2fQ.293 1.6 Status I Support Item Service OI

46、 Reference I 3 O O Calling line identification presentation (CLIP) implemented, with CLI provided by the network without subaddress OI 4 Please specify any national deviations: Calling line identification presentation (CLIP) implemented, with CLI provided by the network, including subaddress AS B-IS

47、DN Supplementary services 1 Calling line identification presentation (CLIP) II imdemented I 2 I NO SCREENING option implemented 1 3fQ.2951 3lQ.295 1 314.295 1 Status O O O O Support Table A.13IQ.299 .2 - CLIP service (continued) Item Service Reference Status 1 Calling line identification restriction

48、 (CLIR) 414.295 1 O implemented Item 5 - Support 6 7 8 9 10 11 Service Calling line identification presentation (CLIP) implemented, with CLI provided by the user, verified and passed Calling line identification presentation (CLIP) implemented, with CLI provided by the user, verified and passed inclu

49、ding subaddress CalGg line identification presentation (CLIP) implemented, with CLI provided by the user, not screened, including subaddress Calling line identification presentation (CLIP) implemented, with CLI provided by the user, verified and failed. including- subaddress Calling line identification presentation (CLIP) implemented, with CLI provided by the user, not screened international call, including subaddress Two calling party number information elements delivery option Calling party number order is User provided, Network provided Please