ITU-T J 901-2008 Requirements for the free viewpoint television (FTV) video transmission system《已出版的自由视点电视视频传输系统规范要求》.pdf

《ITU-T J 901-2008 Requirements for the free viewpoint television (FTV) video transmission system《已出版的自由视点电视视频传输系统规范要求》.pdf》由会员分享，可在线阅读，更多相关《ITU-T J 901-2008 Requirements for the free viewpoint television (FTV) video transmission system《已出版的自由视点电视视频传输系统规范要求》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、 International Telecommunication Union ITU-T J.901TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (06/2008) SERIES J: CABLE NETWORKS AND TRANSMISSION OF TELEVISION, SOUND PROGRAMME AND OTHER MULTIMEDIA SIGNALS Transmission of 3-D TV services Requirements for the free viewpoint television (FTV) video

2、 transmission system Recommendation ITU-T J.901 Rec. ITU-T J.901 (06/2008) i Recommendation ITU-T J.901 Requirements for the free viewpoint television (FTV) video transmission system Summary Recommendation ITU-T J.901 shows FTV system model, and then defines requirements for FTV video transmission s

3、ystem. Source Recommendation ITU-T J.901 was approved on 13 June 2008 by ITU-T Study Group 9 (2005-2008) under Recommendation ITU-T A.8 procedure. ii Rec. ITU-T J.901 (06/2008) FOREWORD The International Telecommunication Union (ITU) is the United Nations specialized agency in the field of telecommu

4、nications, information and communication technologies (ICTs). The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of ITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommuni

5、cations on a worldwide basis. The World Telecommunication Standardization Assembly (WTSA), which meets every four years, establishes the topics for study by the ITU-T study groups which, in turn, produce Recommendations on these topics. The approval of ITU-T Recommendations is covered by the procedu

6、re laid down in WTSA Resolution 1. In some areas of information technology which fall within ITU-Ts purview, the necessary standards are prepared on a collaborative basis with ISO and IEC. NOTE In this Recommendation, the expression “Administration“ is used for conciseness to indicate both a telecom

7、munication administration and a recognized operating agency. Compliance with this Recommendation is voluntary. However, the Recommendation may contain certain mandatory provisions (to ensure e.g. interoperability or applicability) and compliance with the Recommendation is achieved when all of these

8、mandatory provisions are met. The words “shall“ or some other obligatory language such as “must“ and the negative equivalents are used to express requirements. The use of such words does not suggest that compliance with the Recommendation is required of any party. INTELLECTUAL PROPERTY RIGHTS ITU dr

9、aws attention to the possibility that the practice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members

10、or others outside of the Recommendation development process. As of the date of approval of this Recommendation, ITU had received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementers are cautioned that this may not repres

11、ent the latest information and are therefore strongly urged to consult the TSB patent database at http:/www.itu.int/ITU-T/ipr/. ITU 2009 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without the prior written permission of ITU. Rec. ITU-T J.901 (06/2008

12、) iii CONTENTS Page 1 Scope 1 2 References. 1 3 Definitions 1 3.1 Terms defined in this Recommendation. 1 4 Abbreviations and acronyms 1 5 Conventions 1 6 FTV System Configuration 2 6.1 Acquisition . 2 6.2 Correction. 2 6.3 Coding 2 6.4 Generation 2 7 View generation detail in transmission aspect 3

13、8 Requirements for FTV transmission system 4 8.1 Protocol requirements. 4 8.2 Transmission data format requirements . 4 Appendix I Definition of related video services . 6 Appendix II FTV service example 7 II.1 VOD service for common streaming players . 7 II.2 Streaming FTV service for displays with

14、 viewpoint control 7 II.3 Streaming FTV service for 3D displays without viewpoint control. 8 II.4 Download FTV service for displays with viewpoint control . 9 II.5 Download FTV service for 3D displays without viewpoint control 10 Rec. ITU-T J.901 (06/2008) 1 Recommendation ITU-T J.901 Requirements f

15、or the free viewpoint television (FTV) video transmission system 1 Scope FTV is an innovative technology that allows one to view a distant 3D world by freely changing the viewpoint. FTV will open a new era in the history of television since such a function has not yet been achieved by conventional T

16、V technology. To achieve free navigation functionality, additional requirements are posed other than the conventional video transmission. This Recommendation specifies requirements for transmission of the FTV video under the structure that are also defined in this Recommendation. This Recommendation

17、 only defines a system aspect in order to avoid overlap work in the coding and view generation technologies. NOTE The structure and content of this Recommendation have been organized for ease of use by those familiar with the original source material; as such, the usual style of ITU-T Recommendation

18、s has not been applied. 2 References The following ITU-T Recommendations and other references contain provisions which, through reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other reference

19、s are subject to revision; users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published. The reference to a

20、 document within this Recommendation does not give it, as a stand-alone document, the status of a Recommendation. ITU-T H.264 Recommendation ITU-T H.264 (2007), Advanced video coding for generic audiovisual services. 3 Definitions 3.1 Terms defined in this Recommendation This Recommendation defines

21、the following terms: 3.1.1 depth map: Distance from the capturing camera to a surface of an object in the scene measured per each pixel on the captured image. 3.1.2 FTV: Video media system that can provide audiences of freedom to choice their viewpoint. 4 Abbreviations and acronyms This Recommendati

22、on does not use any particular abbreviations and acronyms. 5 Conventions This Recommendation does not use any particular notation, style, presentation. 2 Rec. ITU-T J.901 (06/2008) 6 FTV System Configuration The configuration of FTV based on ray space theory is shown in Figure 1. The major processin

23、g of FTV is acquisition, correction, coding and generation. Interpolation is a key technology used in compression and generation. Figure 1 Configuration of the FTV system 6.1 Acquisition The FTV signal is acquired by a camera array. There are several types of camera arrangement depending on how free

24、ly we want to see the scene. For example, if we want to see the scene from one side only, the cameras are placed on a line. If we want to see the scene from the backside, they are placed on a circle. If we want to see the scene from the top, they are placed on a hemi-spherical dome. Camera parameter

25、s are needed in addition to images for FTV signal. 6.2 Correction Correction of captured camera images is needed for efficient coding and interpolation. In practical systems, it is difficult to align many cameras with the same performance at the desired places precisely. Therefore, the difference of

26、 camera performance and the misalignment of cameras should be corrected. For example, a large improvement of PSNR is achieved in both coding and interpolation by transforming the captured images. 6.3 Coding The simplest way to compress the FTV signal is to apply the conventional video coding technol

27、ogy to each camera signal independently. However, considering FTV coding is not a simple multi image coding, there is more efficient way to compress the signal by such as multi-view coding (MVC) in H.264 extension. Not only coding efficiency but also functionality is important in FTV coding dependin

28、g on the usage models described later. Assume the FTV On Demand. Many users want to see the scene from different viewpoints. In this case, random access by local decoding is required. In this Recommendation, coding technology itself is out of scope and refers to relevant coding standards. 6.4 Genera

29、tion Free viewpoint images are generated according to viewpoint control by an audience using video data acquired by cameras. In this Recommendation, depth map information and camera parameters are utilized for efficient signal processing in the generation stage. In addition, display specifications m

30、ay also be required in order to achieve best quality by adaptation to the display characteristics Rec. ITU-T J.901 (06/2008) 3 such as 2D/3D, the number of views of the display, and the distance of each view. Note that the view generation method is out of scope of this Recommendation. 7 View generat

31、ion detail in transmission aspect The view generation module is further decomposed as follows. Figure 2 Position of depth search and interpolation in FTV The basic assumption here is that view generation is divided into depth search and interpolation. Then the FTV system can be constructed in variou

32、s ways as shown in Figure 2. In case A, both depth search and interpolation are performed at the receiver side. Video data is transmitted by MVC, however only the portion of the data is decoded in accordance with the necessity of view generation by depth search and interpolation. In this case, much

33、computation is required at the receiver side, while the viewpoint control will be fast. In case B, depth search is performed at the sender side for all captured images and interpolation is performed at the receiver side using the minimum depth information. In this case, computational load at the rec

34、eiver side is reduced, because the depth information helps interpolation process greatly. In case C, both depth search and interpolation are performed at the sender side. In this case, the receiver only receives the requested view data according to the viewpoint control. However, the response of the

35、 view control might be delayed. 4 Rec. ITU-T J.901 (06/2008) In case D, both depth search and interpolation are performed at the sender side, and all interpolated data is stored into a media. Then, the receiver decodes the view data inside the storage. It should be noted that the storage may be at t

36、he receiver side as well as at the sender side like a remote disk. In this case, the storage data size is huge. Cases A and B can apply to both real-time transmission and non-real time operation. Case C assumes only real-time transmission, while Case D is only for stored media. 8 Requirements for FT

37、V transmission system The standardization items for FTV transmission system are a protocol aspect and a data format for transmission that relates transmission of FTV data. FTV data are defined as view images, camera parameters and depth maps. Though other functional elements in Figure 3 are out of s

38、cope of this Recommendation, operations envisioned in the FTV model should also be considered in the transmission requirements. Figure 3 FTV reference model and standardization items in this Recommendation 8.1 Protocol requirements Scalability Various types of scalability, e.g. picture resolution, f

39、rame rate, SNR, and range of possible viewpoint, may be supported. View control Viewpoint control message should be transmitted, if required. Play back control message such as play, pause and stop may be transmitted. Audiovisual synchronization Video and audio representation should be synchronized i

40、n time even if the viewpoint is changed. Capability exchange Encoder and decoder capability exchange should be performed. In addition, view generation capability and display characteristics may be exchanged. 8.2 Transmission data format requirements Video data Video and audio data should be supporte

41、d in the data format. Video data may be corrected from captured images by real multiple cameras, so that misalignment of camera geometry and colours should be removed. Rec. ITU-T J.901 (06/2008) 5 Depth maps Depth maps should be supported in the data format. Depth maps may be generated by conversion

42、 from captured images by real multiple cameras or through special depth cameras or by other means. Types of depth information should be defined that are able to derive the original object distance. Camera parameter Camera parameters, both extrinsic and intrinsic parameters, should be supported in th

43、e data format. 6 Rec. ITU-T J.901 (06/2008) Appendix I Definition of related video services (This appendix does not form an integral part of this Recommendation) FTV: Free-viewpoint TV is the presentation of the images obtained by multiple camera sources such as those in a ring configuration, enabli

44、ng the viewer to change viewpoint freely by generating the images at virtual viewpoint from real images. Stereoscopic TV: Stereoscopic TV is the presentation of the image normally using two sensors spaced at the typical separation of human eyes and displayed in such a way that the images are seen by

45、 left and right eye respectively to the position of the sensors. 3D TV: In 3D TV, the images derived from the multiplicity of sensors such as those arranged in planar matrix are displayed in such a way to create pseudo-holographic images in space which enables the viewer to see one side or the other

46、 side of the object (such as a head for example) by moving the viewing position from one side to the other of the virtual image in space. Such an image might be some distance in front of the display device. Rec. ITU-T J.901 (06/2008) 7 Appendix II FTV service example (This appendix does not form an

47、integral part of this Recommendation) II.1 VOD service for common streaming players This clause describes one usage of FTV system for video-on-demand services for common streaming players, where a simple video and audio stream decoder can be used as a receiver with an external control unit. Figure I

48、I.1 VOD service for streaming player with external control unit The video encoding for the streaming can be H.264 or other coding standards. The streaming control protocol can be RTSP or other protocols. In this case, the player works as a common video streaming player. For viewpoint control, a spec

49、ial controller is needed outside of the player. The controller will send a viewpoint control message to the VOD server. The VOD server is able to provide a video stream to the streaming player as well as to change the viewpoint according to the message from the controller. All possible viewpoints can be rendered beforehand. Or the scene generation can be performed in real time according to the request, where VOD server should be coupled with interpolation module. The data format in the VOD server and the view generation method are out of scope of this Recommendation. One dr