FORD CG8X-1997 CONVEYOR SAFETY DEVICES PULL WIRE ROPE AND SWITCH《输送机安全装置 拉绳和开关》.pdf

《FORD CG8X-1997 CONVEYOR SAFETY DEVICES PULL WIRE ROPE AND SWITCH《输送机安全装置 拉绳和开关》.pdf》由会员分享，可在线阅读，更多相关《FORD CG8X-1997 CONVEYOR SAFETY DEVICES PULL WIRE ROPE AND SWITCH《输送机安全装置 拉绳和开关》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 Manufacturing StandardsFord Motor Company199706 CONVEYOR SAFETY DEVICES PULL CG8XWIRE ROPE AND SWITCHEngineering Standards & Printed copies are uncontrolled.Systems Engineering (ESSE) Page 1 of 11. SCOPE: The following standard applies to emergency stop safety pull wire ropes andswitches for use on

2、 conveyors.2. REFERENCES:| Ford Manufacturing Standards| ES5 - “Cable Pull Emergency Stop Switches”| EX1 - “Ford Supplemental Requirements to SAE HS-1738”| Industry Standards| Society of Automotive Engineers, Inc., SAE HS-1738 “Electrical| Standard for Industrial Machinery - Supplement to NFPA 79”3.

3、 GENERAL: The design of the safety devices must comply with the latest edition of thereferenced standard. It is the responsibility of the supplier to determine that allstandards are met or request a waiver of requirements if necessary. Any waiver must beapproved by the requisitioning activity.Note: The symbol “|” denotes a revision(s) has been made.