ETSI TS 144 057-2017 Digital cellular telecommunications system (Phase 2+) (GSM) GSM Cordless Telephony System (CTS) Phase 1 CTS supervising system layer 3 specification (V14 0 0 3.pdf

《ETSI TS 144 057-2017 Digital cellular telecommunications system (Phase 2+) (GSM) GSM Cordless Telephony System (CTS) Phase 1 CTS supervising system layer 3 specification (V14 0 0 3.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 144 057-2017 Digital cellular telecommunications system (Phase 2+) (GSM) GSM Cordless Telephony System (CTS) Phase 1 CTS supervising system layer 3 specification (V14 0 0 3.pdf（49页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 144 057 V14.0.0 (2017-04) Digital cellular telecommunications system (Phase 2+) (GSM); GSM Cordless Telephony System (CTS), Phase 1; CTS supervising system layer 3 specification (3GPP TS 44.057 version 14.0.0 Release 14) TECHNICAL SPECIFICATION GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSRETSI E

2、TSI TS 144 057 V14.0.0 (2017-04)13GPP TS 44.057 version 14.0.0 Release 14Reference RTS/TSGC-0144057ve00 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif e

3、nregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present

4、 document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive

5、 within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the

6、present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as auth

7、orized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PL

8、UGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Associa

9、tion. ETSI ETSI TS 144 057 V14.0.0 (2017-04)23GPP TS 44.057 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI

10、 members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr

11、.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential t

12、o the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as

13、 being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will

14、“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 144 057 V14.0.0 (2017-04)33GPP T

15、S 44.057 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 6g31 Scope 7g31.1 Scope of the Technical Specification . 7g31.2 Application to the interface structures 7g31.3 Structure of layer 3 procedures . 7g31.4 Test procedures 7g31.

16、5 Transmission layer . 7g31.6 Overview of control procedures . 7g31.6.1 List of procedures . 7g31.7 Applicability of implementations . 8g32 References 8g33 Definitions, abbreviations and Random values 12g33.1 Definitions 12g33.2 Abbreviations . 12g33.3 Random values . 12g34 CTS supervising managemen

17、t procedures . 12g34.1 General . 12g34.2 CTS-SPM procedures . 13g34.3 CTS-SPM states . 13g34.3.1 CTS-SPM states at the Fixed Part . 13g34.3.2 CTS-SPM states at the Service Node 13g34.4 CTS-SPM common procedures 14g34.4.1 CTS-FP initialisation procedure . 14g34.4.1.1 CTS-FP initialisation initiation

18、. 14g34.4.1.2 CTS-FP initialisation completion 14g34.4.2 CTS enrolment procedure . 14g34.4.2.1 CTS-SPM enrolment initiation 15g34.4.2.2 CTS enrolment completion . 15g34.4.3 CTS operation data update procedure . 15g34.4.3.1 CTS operation data update initiation . 15g34.4.3.2 CTS operation data update

19、completion . 15g34.4.4 CTS Information data request procedure 15g34.4.4.1 CTS Information data request . 16g34.4.4.2 CTS Information data response . 16g34.4.5 CTS-FP de-initialisation procedure 16g34.4.5.1 CTS-FP de-initialisation initiation 16g34.4.5.2 CTS de-initialisation completion 16g34.4.6 CTS

20、-SPM de-enrolment procedure . 16g34.4.6.1 CTS-SPM de-enrolment initiated by the fixed part . 16g34.4.6.2 CTS-SPM de-enrolment initiated by the service node 16g34.4.7 CTS FP authentication procedure . 16g34.4.7.1 CTS FP authentication request 17g34.4.7.2 CTS FP authentication response . 17g34.4.8 CTS

21、 MS authentication procedure 17g34.4.8.1 CTS MS authentication request. 17g34.4.8.2 CTS MS authentication response 17g35 Examples of structured procedures 17g35.1 CTS-FP Initialisation 17g35.2 CTS-SPM Enrolment . 18g35.3 Operation data update . 19g3ETSI ETSI TS 144 057 V14.0.0 (2017-04)43GPP TS 44.0

22、57 version 14.0.0 Release 145.4 Information request 19g35.5 CTS-FP De-initialisation 19g35.6 CTS-SPM De-enrolment 20g35.6.1 CTS-SPM De-enrolment initiated by the fixed part . 20g35.6.2 CTS-SPM De-enrolment initiated by the service node . 20g36 Handling of unknown, unforeseen, and erroneous protocol

23、data . 21g37 Message functional definitions and contents 21g37.1 Messages for CTS Supervising management . 22g37.1.1 CTS-FP initialisation request 22g37.1.2 CTS-FP initialisation accept . 23g37.1.3 CTS-FP initialisation complete . 23g37.1.4 CTS-FP initialisation reject 24g37.1.5 CTS-FP de-initialisa

24、tion request . 24g37.1.6 CTS-FP de-initialisation complete 24g37.1.7 CTS-FP de-initialisation reject . 25g37.1.8 CTS enrolment request . 25g37.1.9 CTS-SPM enrolment accept . 26g37.1.10 CTS-SPM enrolment reject . 26g37.1.11 CTS-SPM de-enrolment indication . 26g37.1.12 CTS-SPM de-enrolment request . 2

25、7g37.1.13 CTS-SPM de-enrolment complete 27g37.1.14 CTS-SPM de-enrolment reject 28g37.1.15 CTS operation data request . 28g37.1.16 CTS operation data deliver . 28g37.1.17 CTS operation data accept 29g37.1.18 CTS operation data reject . 29g37.1.19 CTS information data request . 30g37.1.20 CTS informat

26、ion data response . 30g37.1.21 CTS FP authentication request 31g37.1.22 CTS FP authentication response . 31g37.1.23 CTS FP authentication reject 31g37.1.24 CTS MS authentication request 32g37.1.25 CTS MS authentication response 32g37.1.26 CTS MS authentication reject . 33g37.1.27 CTS SN signing mode

27、 command 33g38 General message format and information elements coding 33g38.1 Overview 33g38.2 Protocol Discriminator . 33g38.3 Skip indicator and transaction identifier . 34g38.3.1 Skip indicator 34g38.3.2 Transaction identifier 34g38.4 Message Type . 34g38.4.1 Supervising management information el

28、ements. 35g38.4.1.1 Authentication parameter RAND1 35g38.4.1.2 Authentication parameter RAND2 35g38.4.1.3 Authentication parameter SRES 36g38.4.1.4 Fixed part Identity . 36g38.4.1.5 Mobile station Identity 37g38.4.1.6 Fixed Part Classmark 38g38.4.1.7 Radio frequency control Parameters . 38g38.4.1.8

29、Radio link control Parameters . 41g38.4.1.9 Generic Frequency List . 42g38.4.1.10 Cell Identity List . 42g38.4.1.11 Application time 44g38.4.1.12 Enrolment time 44g38.4.1.13 Validity period 45g38.4.1.14 Recall period . 45g39 List of system parameters . 46g39.1 Timers and counters for radio resource

30、management . 46g3ETSI ETSI TS 144 057 V14.0.0 (2017-04)53GPP TS 44.057 version 14.0.0 Release 149.1.1 Timers on the SN side . 46g39.1.2 Timers on the CTS-FP side . 46g3Annex A (informative): Change Request History 47g3History 48g3ETSI ETSI TS 144 057 V14.0.0 (2017-04)63GPP TS 44.057 version 14.0.0 R

31、elease 14Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present documen

32、t, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control

33、. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 144 057 V14.0.0 (2017-04)73GPP TS 44.057 version 14.0.0 Release

34、141 Scope The present document specifies the procedures used at the CTS system interface with the supervision part i.e. the interface between the CTS-FP and the CTS-SN. Only CTS regular supervising procedures are described; FMC management is not intended to be standardised. The present document does

35、 not specify the transmission layer but only the layer 3. When the notations for “further study“ or “FS“ or “FFS“ are present in the present document they mean that the indicated text is not a normative portion of the present document. The structured functions and procedures of this protocol and the

36、 relationship with other layers and entities are described in general terms in GSM 04.07. 1.1 Scope of the Technical Specification The procedures currently described in the present document are for supervising management over the CTS-FP/CTS-SN interface. 1.2 Application to the interface structures T

37、he layer 3 procedures apply to the interface structures defined in GSM 04.03. GSM 04.07 gives the general description of layer 3 including procedures, messages format and error handling. 1.3 Structure of layer 3 procedures A building block method is used to describe the layer 3 procedures. The basic

38、 building blocks are “elementary procedures“ provided by the protocol control entities. Complete layer 3 transactions consist of specific sequences of elementary procedures. The term “structured procedure“ is used for these sequences. 1.4 Test procedures Test procedures of the CTS / Fixed Network in

39、terface signalling are described in the GSM 11.56 series. 1.5 Transmission layer The transmission layer is out of scope of the present document. One implementation could be a V.22bis modem with an HDLC based protocol. 1.6 Overview of control procedures 1.6.1 List of procedures The following procedur

40、es are specified in the present document: - Clause 4 specifies elementary procedures for CTS Supervising Management: - CTS-FP initialisation procedure (subclause 4.4.1); - CTS-FP de-initialisation procedure (subclause 4.4.5); - CTS enrolment procedure (subclause 4.4.2); ETSI ETSI TS 144 057 V14.0.0

41、(2017-04)83GPP TS 44.057 version 14.0.0 Release 14- CTS de-enrolment procedure (subclause 4.4.6); - CTS operation data update procedure (subclause 4.4.3); - CTS information request procedure (subclause 4.4.4); - CTS FP authentication procedure (subclause 4.4.7); - CTS MS authentication procedure (su

42、bclause 4.4.8). The elementary procedures can be combined to form structured procedures. Examples of such structured procedures are given in clause 5. This part of the Technical Specification is only provided for guidance to assist implementations. Clause 6 specifies actions to be taken on various e

43、rror conditions and also provides rules to ensure compatibility with future enhancements of the protocol. 1.7 Applicability of implementations The applicability of procedures of the present document for the fixed part is dependent on the services and functions which are to be supported by a fixed pa

44、rt. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subseq

45、uent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 GSM 01.02:

46、 “Digital cellular telecommunications system (Phase 2+); General description of a GSM Public Land Mobile Network (PLMN)“. 2 GSM 01.04: “Digital cellular telecommunications system (Phase 2+); Abbreviations and acronyms“. 3 GSM 02.02: “Digital cellular telecommunications system (Phase 2+); Bearer Serv

47、ices (BS) supported by a GSM Public Land Mobile Network (PLMN)“. 4 GSM 02.03: “Digital cellular telecommunications system (Phase 2+); Teleservices supported by a GSM Public Land Mobile Network (PLMN)“. 5 GSM 02.09: “Digital cellular telecommunications system (Phase 2+); Security aspects“. 6 GSM 02.1

48、1: “Digital cellular telecommunications system (Phase 2+); Service accessibility“. 7 GSM 02.17: “Digital cellular telecommunications system (Phase 2+); Subscriber Identity Modules (SIM); Functional characteristics“. 8 GSM 02.40: “Digital cellular telecommunications system (Phase 2+); Procedures for

49、call progress indications“. 9 GSM 03.01: “Digital cellular telecommunications system (Phase 2+); Network functions“. 10 GSM 03.03: “Digital cellular telecommunications system (Phase 2+); Numbering, addressing and identification“. ETSI ETSI TS 144 057 V14.0.0 (2017-04)93GPP TS 44.057 version 14.0.0 Release 1411 GSM 03.13: “Digital cellular telecommunications system (Phase 2+); Discontinuous Reception (DRX) in the GSM system“. 12 GSM 03.14: “Digital cellular telecommunications system (Phase 2+); Support of Dual Tone Multi-Frequency signalling (DTMF