ETSI TS 100 587-2002 Digital Cellular Telecommunications System (Phase 2+) General Aspects on the BSS-MSC Interface《数字蜂窝通信系统(第2+阶段) BSS-MSC接口的一般方面3GPP TS 08 01(版本8 0 1 1999年发布)》.pdf

《ETSI TS 100 587-2002 Digital Cellular Telecommunications System (Phase 2+) General Aspects on the BSS-MSC Interface《数字蜂窝通信系统(第2+阶段) BSS-MSC接口的一般方面3GPP TS 08 01(版本8 0 1 1999年发布)》.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 100 587-2002 Digital Cellular Telecommunications System (Phase 2+) General Aspects on the BSS-MSC Interface《数字蜂窝通信系统(第2+阶段) BSS-MSC接口的一般方面3GPP TS 08 01(版本8 0 1 1999年发布)》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、ETSI TS 1 O0 587 V8.0.1 (2002-05) Technical Specificafion Digital cellular telecommunications system (Phase 2+); General Aspects on the BSS-MSC Interface (3GPP TS 08.01 version 8.0.1 Release 1999) 3GPP TS 08.01 version 8.0.1 Release 1999 1 ETSI TS 100 587 V8.0.1 (2002-05) Reference RTS/TSGG-02080 1

2、80 1 Keywords GSM ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the pr

3、esent document can be downloaded from: http:lwmv.etsi .arq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In ca

4、se of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this a

5、nd other ETSI documents is available at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction ex

6、tend to reproduction in all media. O European Telecommunications Standards Institute 2002. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the bene

7、fit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3GPP TS 08.01 version 8.0.1 Release 1999 2 ETSI TS 100 587 V8.0.1 (2002-05) Intellectual Property Rights IPRs essential or potentially essential to the present d

8、ocument may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 314: “Intellectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied to ETSI in respect

9、ofETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not reference

10、d in ETSI SR O00 3 14 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specificat

11、ions or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under www.etsi.ornkey . ETSI 3GPP TS 08.01 version 8.0.

12、1 Release 1999 3 ETSI TS 100 587 V8.0.1 (2002-05) Contents Intellectual Property Rights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13、. . . . . . . . . . . . . . . . . . . . . .2 Foreword . 2 Foreword O o. 1 0.2 0.3 1 2 3 4 4.1 4.2 4.3 4.4 4.5 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Scope 5 5 6 A-Interface capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 A-Interface specification objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16、 . . . . . . . . . . . . . . . .7 A-Interface characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 O

17、ther specifications on the MSC-BSS interface 7 7 8 8 8 9 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Definitions and abbreviations . . . . . . . . . . . . . Technical Specification 3GPP TS 08.02 Interface Principles . . Technical Specification 3

18、GPP TS 08.04 Layer 1 - Specification . Technical Specification 3GPP TS 08.06 Signalling Transport Mechanism - Speci Technical Specification 3GPP TS 08.08 Layer 3 Specification . Technical Specification 3GPP TS 08.20 Rate adaption on the BSS-MSC interface Annex A (informative): Change History 10 Hist

19、ory 11 ETSI 3GPP TS 08.01 version 8.0.1 Release 1999 4 ETSI TS 100 587 V8.0.1 (2002-05) Foreword This Technical Specification has been produced by the 3d Generation Partnership Project (3GPP). The present document specifies or references procedures used on the Base Station System (BSS) to Serving GP

20、RS Support Node (SGSN) interface for control of GSM packet data services within the digital cellular telecommunications system (Phase 2+). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modiSl the conten

21、ts of the present document, it will be re-released by the TSG with an identiSling change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved docu

22、ment under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI 3GPP TS 08.01 version 8.0.1 Release 1999 5 ETSI

23、 TS 100 587 V8.0.1 (2002-05) O o. 1 I n t rod uct ion Scope The present document is an introduction to the 3GPP TS 08.0 series of Technical Specifications and deals with the definition of the base station system (BSS) to mobile switching centre (MSC) (referred to as the A-interface) defined for the

24、GSM system. It also introduces Technical Specifications in the 3GPP TS 08.20 series, dealing with the support of data services on this interface. The present document gives an overview of the content of the 3GPP TS 08.0 and 3GPP TS 08.20 series of Technical Specifications explaining how the detailed

25、 content of the Technical Specifications is partitioned and how the Technical Specifications can be used to support a full BSS-MSC interface. 0.2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are

26、 either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document),

27、 a non-specific reference implicitly refers to the latest version of that document in the same Release as theyresent document. il 21 Void. 31 Void. 41 Void. 51 Void. 61 Void. 3GPP TS O 1.04: “Abbreviations and acronyms“. Void. Void. Void. Void. Void. Void. Void. Void. Void. 161 Void. i71 Void. ETSI

28、3GPP TS 08.01 version 8.0.1 Release 1999 6 ETSI TS 100 587 V8.0.1 (2002-05) i181 i191 i201 211 i221 i231 i241 i251 i261 i271 i281 i291 i301 i3 i1 i321 i331 i341 i3 51 i3 61 i3 81 i401 i411 i421 i371 i3 91 i43 1 i441 451 i461 0.3 Void. Void. Void. Void. Void. Void. Void. 3GPP TS 04.08: “Mobile radio

29、interface layer 3 specification“ 3GPP TS 04.21: “Rate adaption on the Mobile Station - Base Station System (MS - BSS) interface“. 3GPP TS 08.02: “Base Station System - Mobile-services Switching Centre (BSS - MSC) interface Interface principles“. 3GPP TS 08.04: “Base Station System - Mobile-services

30、Switching Centre (BSS - MSC) interface Layer 1 specification“. 3GPP TS 08.06: “Signalling transport mechanism specification for the Base Station System - Mobile-services Switching Centre (BSS - MSC) interface“. 3GPP TS 08.08: “Mobile Switching Centre - Base Station System (MSC - BSS) interface Layer

31、 3 specification“. 3GPP TS 08.20: “Rate adaption on the Base Station System - Mobile-services Switching Centre (BSS - MSC) interface“. Void. Void. Void. Void. Void. Void. Void. Void. Void. Void. Void. Void. Void. Void. Void. Definitions and abbreviations Abbreviations used in this specification are

32、listed in 3GPP TS 01.04. ETSI 3GPP TS 08.01 version 8.0.1 Release 1999 7 ETSI TS 100 587 V8.0.1 (2002-05) 1 A- I n te rface capa b i I it es The BSS-MSC interface shall be capable of supporting all the services offered to GSM users and subscribers. In addition it also allows for the allocation of su

33、itable radio resources within the PLMN, and the operation and maintenance of those resources. 2 A-lnterface specification objectives The MSC to BSS interface specifications shall allow the following: i) ii) iii) iv) vi) vii) viii) VI Connection of various manufacturers BSSs to the same MSC; The use

34、of several manufacturers MSCs to the same type of BSS; The use of the same BSS in any PLMN; The use of the same MSC in any PLMN; The separate evolution of MSC and BSS technology, and; The separate evolution of O Evolution towards lower speech coding rates; Support of all services defined in the 3GPP

35、 TS 02 series of Technical Specifications. 3 A-Interface characteristics The interface is defiied to be at the boundary of the MSC. The MSC to BSS interface is specified by a set of characteristics, including: i) Physical and electromagnetic parameters; ii) Channel structures; iii) Network operating

36、 procedures; iv) Operation and Maintenance information support. The definition of the MSC to BSS interface follows a layered approach similar to that in the ISDN. Layer 3 is for the most part based on Technical Specification 3GPP TS 04.08 with additional procedures added for the control of radio res

37、ources and the identification of transactions using the SCCP. Layer 2 is based on the signalling systemNo.7 (SS N0.7) Message Transfer Part (MTP). Layer 1 is either digital (at 2 048 kbit/s, based on CCITT Rec. G703 clause 6) or analogue with the data being passed by the use of modems (this latter c

38、ase is a national option). 4 Other specifications on the MSC-BSS interface The full structure of the Technical Specifications speciSling the MSC to BSS link are as follows. 4.1 Technical Specification 3GPP TS 08.02 Interface Principles The present document deals with the functional split between the

39、 BSS and the MSC. This functional split is then supported by the other Technical Specifications in the 3GPP TS 08-series. Technical Specification 3GPP TS 08.02 also contains some information on the placement of transcoders/rate adapters, these being functionally part of the BSS though a degree of fr

40、eedom is allowed in their geographical location. Lastly Technical Specification 3GPP TS 08.02 explains the use of transparent and non transparent signalling information across the interface. The key point is that the majority of call related signalling from the MS is passed in a fairly transparent w

41、ay through the BSS. ETSI 3GPP TS 08.01 version 8.0.1 Release 1999 8 ETSI TS 100 587 V8.0.1 (2002-05) 4.2 Technical Specification 3GPP TS 08.04 Layer 1 - Specification The present document defines the physical layer at the BSS-MSC interface point. The physical interface chosen is a 2Mbits/s (32*64kbi

42、ts/s) interface according to the standard CCITT recommendations. The speech coding called up in the present document is standard A-law, coding of the traffic bit streams for data calls is dealt with in Technical Specifications 3GPP TS 04.21 and 3GPP TS 08.20. 4.3 Technical Specification 3GPP TS 08.0

43、6 Signalling Transport Mechanism - Specification In order to pass the signalling information between BSS and MSC some reliable transport mechanism has to be used. The basis of the transport mechanism is an internationally agreed protocol known as signalling system N0.7. Several services are required

44、 from this protocol but two key requirements are that messages can be transferred between the BSS and MSC without corruption, and secondly that a transaction with a particular mobile can be identified. The correct transfer of messages without corruption is handled by the “Message Transfer Part“ of S

45、S N0.7 and this is documented in Technical Specification 3GPP TS 08.06 which is an exceptions document to the CCITT specification. The subset so formed is designed so that it is compatible with a “full“ MTP such as might be provided at an MSC. The identification of the transaction involved implies s

46、ome form of logical connection. This is achieved by using the signalling connection control part (SCCP) of SS N0.7. Again a minimum subset is formed in order to ease implementation. 4.4 Technical Specification 3GPP TS 08.08 Layer 3 Specification In the present document the application parts are desc

47、ribed. There are two currently identified in the BSS to MSC interface protocol, these are the: - BSSOMAP; - BSSAP. The BSSAP is further subdivided into two subprotocols, the BSSMAP and the DTAP. The BSSMAP and DTAP are fully defined, the BSSOMAP is only supported in terms of a signalling transport a

48、bility. The DTAP text is split between Technical Specifications 3GPP TS 08.06 and 3GPP TS 08.08 but the text in 3GPP TS 08.08 defies which layer 3 air interface messages are passed transparently through the BSS and which are analysed at the BSS. The BSSMAP (base station system management application

49、 part) is that part of the protocol responsible for all aspects of the radio resource handling at the BSS. The text is structured as a set of procedures which are defied separately and can be employed as felt appropriate by the operator/manufacturer to meet the requirements of the application in which it is being used. The procedures themselves can be driven in different modes depending upon the input parameters received from the MSC or sent from the OMC. The BSSOMAP (base station system operation and maintenance application part) supports all of the O and M co