ETSI EN 305 550-2-2014 Electromagnetic compatibility and Radio spectrum Matters (ERM) Short Range Devices (SRD) Radio equipment to be used in the 40 GHz to 246 GHz frequency range .pdf

《ETSI EN 305 550-2-2014 Electromagnetic compatibility and Radio spectrum Matters (ERM) Short Range Devices (SRD) Radio equipment to be used in the 40 GHz to 246 GHz frequency range .pdf》由会员分享，可在线阅读，更多相关《ETSI EN 305 550-2-2014 Electromagnetic compatibility and Radio spectrum Matters (ERM) Short Range Devices (SRD) Radio equipment to be used in the 40 GHz to 246 GHz frequency range .pdf（15页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 305 550-2 V1.2.1 (2014-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R Essential, or potentia

2、lly Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guar

3、antee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electro

4、magnetic compatibility and Radio spectrum Matters (ERM). The present document is a new standard that takes advantage of technical developments within the SRD industry. In particular this includes the development in technologies which makes applications in the higher frequency range possible. The pre

5、sent document has been produced by ETSI in response to a mandate M/284 issued from the European Commission under Directive 98/34/EC i.1 as amended by Directive 98/48/EC i.9. The title and reference to the present document are intended to be included in the publication in the Official Journal of the

6、European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC i.2. See article 5.1 of Directive 1999/5/EC i.2 for information on presumption of conformity and Harmonized Standards or parts thereof the references of which have been published in the Official Journal of t

7、he European Union. The requirements relevant to Directive 1999/5/EC i.2 are summarized in annex A. The present document is part 2 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz t

8、o 246 GHz frequency range, as identified below: Part 1: “Technical characteristics and test methods“; Part 2: “Harmonized EN covering the essential requirements of article 3.2 of the R for all types of modulation. Table 1 shows a list of the frequency bands as designated in the CEPT/ERC Recommendati

9、on 70-03 i.3 as known at the date of publication of the present document. NOTE 1: Table 1 represents the most widely implemented position within the CEPT countries i.3, but it should not be assumed that all designated bands are available in all countries. It is also foreseen that these frequencies m

10、ay be implemented in European Commission Decision 2006/771/EC i.6, European Commission Decision 2013/752/EU i.7 and CEPT/ERC Recommendation 74-01 i.8 in the future. Table 1: Short Range Devices within the 40 GHz to 246 GHz frequency range Frequency Bands Applications Notes 57 GHz to 64 GHz Non-speci

11、fic SRD 61,0 GHz to 61,5 GHz Non-specific SRD 122 GHz to 123 GHz Non-specific SRD 244 GHz to 246 GHz Non-specific SRD NOTE 2: In addition, it should be noted that other frequency bands may be available in a country within the frequency range 40 GHz to 246 GHz covered by the present document. the CEP

12、T/ERC Recommendation 70-03 i.3 as implemented through National Radio Interfaces (NRI) and additional NRI as relevant. NOTE 3: On non-harmonized parameters, national administrations may impose certain conditions such as the type of modulation, frequency, channel/frequency separations, maximum transmi

13、tter radiated power, duty cycle, and the inclusion of an automatic transmitter shut-off facility, as a condition for the issue of an individual or general licence, or as a condition for the issuing of Individual Rights for use of spectrum or General Authorization, or as a condition for use “under li

14、cence exemption“ as it is in most cases for Short Range Devices. The present document covers fixed stations, mobile stations and portable stations. NOTE 4: A list of such ENs is included on the web site http:/www.newapproach.org. 2 References References are either specific (identified by date of pub

15、lication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available

16、in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. ETSI ETSI EN 305 550-2 V1.2.1 (2014-10) 72.1 Normative references The following referen

17、ced documents are necessary for the application of the present document. 1 ETSI EN 305 550-1 (V1.2.1) (10-2014): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 1: Technical characte

18、ristics and test methods“. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Directive 98/34/EC of the European Parliament and of the Council of 22 June 19

19、98 laying down a procedure for the provision of information in the field of technical standards and regulations. i.2 Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conf

20、ormity (R A guide to the production of candidate Harmonized Standards for application under the R Uncertainties in the measurement of mobile radio equipment characteristics“. i.6 European Commission Decision 2006/771/EC of 9 November 2006 on harmonization of the radio spectrum for use by short-range

21、 devices. i.7 European Commission Decision 2013/752/EU of 11 December 2013 (amending Decision 2006/771/EC on harmonisation of the radio spectrum for use by short-range devices and repealing Decision 2005/928/EC). i.8 CEPT/ERC Recommendation 74-01: “Unwanted emissions in the spurious domain“, Hradec

22、Kralove, Cardiff 2011. i.9 Directive 98/48/EC of the European Parliament and of the Council of 20 July 1998 amending Directive 98/34/EC laying down a procedure for the provision of information in the field of technical standards and regulations. 3 Definitions, symbols and abbreviations 3.1 Definitio

23、ns For the purposes of the present document, the terms and definitions given in the R the value of the measurement uncertainty for the measurement of each parameter shall be included in the test report; the recorded value of the measurement uncertainty shall be, for each measurement, equal to or low

24、er than the values in clause 4.8, table 4 of EN 305 550-1 1. For the test methods, according to the present document, the measurement uncertainty figures shall be calculated in accordance with the principles contained within TR 100 028 i.5 and shall correspond to an expansion factor (coverage factor

25、) k = 1,96 or k = 2 (which provide confidence levels of respectively 95 % and 95,45 % in the case where the distributions characterizing the actual measurement uncertainties are normal (Gaussian). The particular expansion factor used for the evaluation of the measurement uncertainty shall be stated.

26、 5.3 Essential transmitter test suites 5.3.1 Spectral power density The test specified in EN 305 550-1 1, clause 7.1.3 shall be carried out. This test suite applies to all transmitters. ETSI ETSI EN 305 550-2 V1.2.1 (2014-10) 105.3.2 RF output power The test specified in EN 305 550-1 1, clause 7.2.3

27、 shall be carried out. This test suite applies to all transmitters. 5.3.3 Permitted range of operation frequencies The test specified in EN 305 550-1 1, clauses 7.3.2 or 7.3.3 shall be carried out. This test suite applies to all transmitters. 5.3.4 Out-of-band emissions The test specified in EN 305

28、550-1 1, clause 7.4.3 shall be carried out. This test suite applies to all transmitters. 5.3.5 Unwanted emissions in the spurious domain The tests specified in EN 305 550-1 1, clause 7.5.2 shall be carried out. This test suite applies to all transmitters. 5.4 Essential receiver test suites 5.4.1 unw

29、anted radiated components The test specified in EN 305 550-1 1, clause 8.1.2 shall be carried out. This test suite applies to all receivers. ETSI ETSI EN 305 550-2 V1.2.1 (2014-10) 11Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) The HS Requirements and confo

30、rmance Test specifications Table (HS-RTT) in table A.1 serves a number of purposes, as follows: it provides a statement of all the requirements in words and by cross reference to (a) specific clause(s) in the present document or to (a) specific clause(s) in (a) specific referenced document(s); it pr

31、ovides a statement of all the test procedures corresponding to those requirements by cross reference to (a) specific clause(s) in the present document or to (a) specific clause(s) in (a) specific referenced document(s); it qualifies each requirement to be either: - Unconditional: meaning that the re

32、quirement applies in all circumstances; or - Conditional: meaning that the requirement is dependent on the manufacturer having chosen to support optional functionality defined within the schedule. in the case of Conditional requirements, it associates the requirement with the particular optional ser

33、vice or functionality; it qualifies each test procedure to be either: - Essential: meaning that it is included with the Essential Radio Test Suite and therefore the requirement shall be demonstrated to be met in accordance with the referenced procedures; - Other: meaning that the test procedure is i

34、llustrative but other means of demonstrating compliance with the requirement are permitted. Table A.1: HS Requirements and conformance Test specifications Table (HS-RTT) Harmonized Standard EN 305 550-2 The following requirements and test specifications are relevant to the presumption of conformity

35、under the article 3.2 of the R those designated “O“ make up the Other Test Suite; for those designated “X“ there is no test specified corresponding to the requirement. The completion of all tests classified “E“ as specified with satisfactory outcomes is a necessary condition for a presumption of con

36、formity. Compliance with requirements associated with tests classified “O“ is a necessary condition for presumption of conformity, although conformance with the requirement may be claimed by an equivalent test or by manufacturers assertion supported by appropriate entries in the technical constructi

37、on file. Clause Number Identification of clause(s) defining the test specification in the present document unless another document is referenced explicitly. Where no test is specified (that is, where the previous field is “X“) this field remains blank. ETSI ETSI EN 305 550-2 V1.2.1 (2014-10) 13Annex

38、 B (informative): Void ETSI ETSI EN 305 550-2 V1.2.1 (2014-10) 14Annex C (informative): Bibliography Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing D

39、irective 89/336/EEC (EMC Directive). Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (LV Directive). ETSI ETSI EN 305 550-2 V1.2.1 (2014-10) 15History Document history V1.1.1 July 2011 Publication V1.2.0 June 2014 EN Approval Procedure AP 20141017: 2014-06-19 to 2014-10-17 V1.2.1 October 2014 Publication