ETSI EN 301 360-2016 Satellite Earth Stations and Systems (SES) Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting toward.pdf

《ETSI EN 301 360-2016 Satellite Earth Stations and Systems (SES) Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting toward.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 301 360-2016 Satellite Earth Stations and Systems (SES) Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting toward.pdf（51页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 301 360 V2.1.1 (2016-06) Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 27,5 GHz to 29,5 GHz frequency bands covering the es

2、sential requirements of article 3.2 of the Directive 2014/53/EU HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 360 V2.1.1 (2016-06) 2 Reference REN/SES-00378 Keywords BSS, earth station, FSS, regulation, satellite ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 4

3、2 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electro

4、nic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing docu

5、ment is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents

6、 is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any for

7、m or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in

8、all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organ

9、izational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 301 360 V2.1.1 (2016-06) 3 Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 6g31 Scope 8g32 References 9g32.1 Normative references . 9g32.2

10、 Informative references 9g33 Definitions, symbols and abbreviations . 10g33.1 Definitions 10g33.2 Symbols 12g33.3 Abbreviations . 12g34 Technical requirements specifications . 13g34.1 General . 13g34.1.1 Environmental profile . 13g34.1.2 ST states and radio states 13g34.2 Conformance requirements 14

11、g34.2.1 General 14g34.2.2 Off-axis spurious radiation . 14g34.2.2.1 Purpose 14g34.2.2.2 Specification 14g34.2.2.3 Conformance tests . 15g34.2.3 On-axis spurious radiation 15g34.2.3.1 Purpose 15g34.2.3.2 Specification 16g34.2.3.2.1 “Carrier-on“ radio state 16g34.2.3.2.2 “Carrier-off“ and “Emissions d

12、isabled“ radio states 16g34.2.3.3 Conformance tests . 16g34.2.4 Off-axis e.i.r.p. emission density within the band . 16g34.2.4.1 Purpose 16g34.2.4.2 Specification 17g34.2.4.3 Conformance tests . 18g34.2.5 Carrier suppression . 18g34.2.5.1 Purpose 18g34.2.5.2 Specification 18g34.2.5.3 Conformance tes

13、ts . 18g34.2.6 Antenna pointing accuracy . 18g34.2.6.1 Purpose 18g34.2.6.2 Specification 19g34.2.6.3 Conformance tests . 19g34.2.7 Control and Monitoring Functions (CMF) 19g34.2.7.1 General 19g34.2.7.2 Processor monitoring 20g34.2.7.2.1 Purpose 20g34.2.7.2.2 Specification 20g34.2.7.2.3 Conformance t

14、ests . 20g34.2.7.3 Transmit subsystem monitoring 21g34.2.7.3.1 Purpose 21g34.2.7.3.2 Specification 21g34.2.7.3.3 Conformance tests . 21g34.2.7.4 Power-on/Reset . 21g34.2.7.4.1 Purpose 21g34.2.7.4.2 Specification 21g34.2.7.4.3 Conformance tests . 21g3ETSI ETSI EN 301 360 V2.1.1 (2016-06) 4 4.2.7.5 Co

15、ntrol Channel (CC) reception . 21g34.2.7.5.1 Purpose 21g34.2.7.5.2 Specification 21g34.2.7.5.3 Conformance tests . 22g34.2.7.6 Network control commands 22g34.2.7.6.1 Purpose 22g34.2.7.6.2 Specification 22g34.2.7.6.3 Conformance test . 22g34.2.7.7 Initial burst transmission . 22g34.2.7.7.1 Purpose 22

16、g34.2.7.7.2 Specification 22g34.2.7.7.3 Conformance tests . 22g34.2.8 Receive antenna off-axis gain pattern . 22g34.2.8.1 Justification . 22g34.2.8.2 Specification 23g34.2.8.3 Conformance tests . 23g34.2.9 Blocking performance. 23g34.2.9.1 Justification . 23g34.2.9.2 Specification 23g34.2.9.3 Confor

17、mance tests . 24g34.2.10 Adjacent Signal Selectivity . 24g34.2.10.1 Justification . 24g34.2.10.2 Specification 24g34.2.10.3 Conformance tests . 24g35 Testing for compliance with technical requirements 24g35.1 Environmental conditions for testing . 24g35.2 Radio test suites 24g36 Test method 25g36.1

18、General . 25g36.2 Off-axis spurious radiation . 26g36.2.1 Test method 26g36.2.1.1 General 26g36.2.1.2 Multi-carrier operation 26g36.2.2 Up to 1 000 MHz 26g36.2.2.1 Test site . 26g36.2.2.2 Measuring receivers 27g36.2.2.3 Procedure 27g36.2.3 Above 1 000 MHz 27g36.2.3.0 General 27g36.2.3.1 Identificati

19、on of the significant frequencies of spurious radiation 28g36.2.3.1.1 Test site 28g36.2.3.1.2 Procedure . 28g36.2.3.2 Measurement of radiated power levels of identified spurious radiation 28g36.2.3.2.1 Test site 28g36.2.3.2.2 Procedure . 28g36.2.3.3 Measurement of conducted spurious radiation at the

20、 antenna flange 29g36.2.3.3.1 Test site 29g36.2.3.3.2 Procedure . 30g36.3 On-axis spurious radiation 30g36.3.1 Test method 30g36.3.1.0 General 30g36.3.1.1 Test site . 30g36.3.1.2 Method of measurement 30g36.3.1.2.1 General 30g36.3.1.2.2 Method of measurement at the antenna flange 31g36.3.1.2.3 Metho

21、d of measurement for an EUT with antenna 31g36.4 Off-axis e.i.r.p. emission density within the band 32g36.4.1 Test method 32g36.4.1.0 General 32g36.4.1.1 Transmit output power density 33g3ETSI ETSI EN 301 360 V2.1.1 (2016-06) 5 6.4.1.1.1 General 33g36.4.1.1.2 Test site 33g36.4.1.1.3 Method of measur

22、ement 33g36.4.1.2 Antenna transmit gain . 34g36.4.1.2.1 General 34g36.4.1.2.2 Test site 34g36.4.1.2.3 Method of measurement 34g36.4.1.3 Antenna transmit radiation patterns 35g36.4.1.3.1 General 35g36.4.1.3.2 Test site 35g36.4.1.3.3 Test arrangement . 36g36.4.1.3.4 Co-polar radiation pattern - azimut

23、h 36g36.4.1.3.5 Co-polar radiation pattern - elevation 36g36.4.1.3.6 Cross-polar radiation pattern - azimuth . 37g36.4.1.3.7 Cross-polar radiation pattern - elevation . 38g36.4.2 Computation of results 38g36.5 Carrier suppression . 38g36.6 Antenna pointing for STs . 39g36.7 ST Control and Monitoring

24、 Functions (CMF) 39g36.7.1 Test arrangement 39g36.7.2 Processor monitoring - Test method . 40g36.7.3 Transmit subsystem monitoring - Test method . 41g36.7.4 Power-on/Reset - Test method 41g36.7.5 Control Channel (CC) reception - Test method 41g36.7.6 Network Control commands - Test method 42g36.7.7

25、Initial burst transmission - Test method 44g36.8 Receive antenna off-axis gain pattern 44g36.8.1 Test method 44g36.8.1.1 Test site . 44g36.8.1.2 Method of measurement 45g36.8.1.3 Computation 45g36.9 Blocking performance 45g36.9.1 Test method 45g36.10 Adjacent Signal Selectivity 46g36.10.1 Test metho

26、d 46g3Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 47g3Annex B (informative): Pointing stability methodology . 49g3Annex C (informative): Bibliography . 50g3History 51g3ETSI ETSI EN 301 360 V2.1.1 (2016-06) 6 Intellectual Pro

27、perty Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs);

28、Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carr

29、ied out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Tec

30、hnical Committee Satellite Earth Stations and Systems (SES). The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.4 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws

31、 of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC 6. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in t

32、able A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. National transposition dates Date of adoption of this EN: 16 May 2016 Date of latest announcement of

33、 this EN (doa): 31 August 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 28 February 2017 Date of withdrawal of any conflicting National Standard (dow): 28 February 2018 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “shou

34、ld not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction

35、 The present document is part of a set of standards developed by ESI and is designed to fit in a modular structure to cover all radio equipment under the Directive 2014/53/EU 6. The modular structure is shown in ETSI EG 201 399 i.3. Figure 1: Void ETSI ETSI EN 301 360 V2.1.1 (2016-06) 7 Remarks on t

36、he present document The present document applies to Satellite Interactive Terminals (SITs) and Satellite User Terminals (SUTs) either for individual or collective use. The present document deals with the specification defined to protect other users of the frequency spectrum, both satellite and terre

37、strial, from unacceptable interference. The determination of the parameters of the user earth stations using a given geostationary satellite for the protection of the spectrum allocated to that satellite, is considered to be under the responsibility of the satellite operator or the satellite network

38、 operators. The requirements have been selected to ensure an adequate level of compatibility with other radio services. The levels, however, do not cover extreme cases which may occur in any location but with a low probability of occurrence. The present document may not cover those cases where a pot

39、ential source of interference which is producing individually repeated transient phenomena or a continuous phenomenon is present, e.g. a radar or broadcast site in the near vicinity. In such a case it may be necessary to use special protection applied to the source of interference, or the interfered

40、 part or both. The present document does not contain any requirement, recommendation or information about the installation of SITs and SUTs. ETSI ETSI EN 301 360 V2.1.1 (2016-06) 8 1 Scope The present document applies to Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) operat

41、ing as part of a bi-directional satellite network. Satellite Terminal (ST) is used in the present document as a generic name that refers equally to a SIT and/or a SUT. In such a network a Network Control Facility (NCF) is responsible for the monitoring and control of the transmit functions of the ST

42、s. These STs have the following characteristics: in the case of SITs reception is in the Fixed Satellite Service (FSS) frequency ranges from 10,70 GHz to 11,70 GHz and from 12,50 GHz to 12,75 GHz as well as the Broadcast Satellite Service (BSS) frequency range from 11,70 GHz to 12,50 GHz; in the cas

43、e of SUTs reception is in the Fixed Satellite Service (FSS) frequency ranges from 19,70 GHz to 20,20 GHz and from 17,70 GHz to 19,70 GHz as well as the Broadcast Satellite Service (BSS) frequency range from 21,40 GHz to 22,00 GHz; in all cases ST transmission is in the frequency band allocated to FS

44、S from 27,50 GHz to 29,50 GHz; STs transmit towards geostationary satellites with spacing down to 2 away from any other geostationary satellite operating in the same frequency band and covering the same area; linear or circular polarization is used for transmission or reception; the received signals

45、 may be analogue and/or digital; the transmitted signals are always of digital nature; the ST antenna diameter does not exceed 1,8 m, or equivalent effective area; the ST is designed for unattended operations. The equipment considered in the present document comprises both the outdoor unit, usually

46、composed of the antenna subsystem and associated upconverter, power amplifier and Low Noise Block (LNB) downconverter, and the indoor unit, usually composed of receive and transmit logic as well as the modulator, including cables between these two units. The present document applies to the ST with i

47、ts ancillary equipment and its various ports and when operated within the boundary limits of all the operational environmental profile declared by the applicant and when installed as required by the applicant by declaration or in the user documentation. All parts of the indoor unit related to recept

48、ion, processing and presentation of the received information except the control channel are not within the scope of the present document. The syntax of the control channel messages is outside the scope of the present document. The present document is intended to cover the provisions of Directive 201

49、4/53/EU 6 (RE Directive) article 3.2, which states that “ radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference“. In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Directive 2014/53/EU 6 may apply to equipment within the scope of the present document. NOTE: A list of such ENs is included on the web site http:/www.newapproach.org/. ETSI