EN ISO TS 14071-2016 en Environmental management - Life cycle assessment - Critical review processes and reviewer competencies Additional requirements and guidelines to ISO 14044 2.pdf

《EN ISO TS 14071-2016 en Environmental management - Life cycle assessment - Critical review processes and reviewer competencies Additional requirements and guidelines to ISO 14044 2.pdf》由会员分享，可在线阅读，更多相关《EN ISO TS 14071-2016 en Environmental management - Life cycle assessment - Critical review processes and reviewer competencies Additional requirements and guidelines to ISO 14044 2.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationPD CEN ISO/TS 14071:2016PD ISO/TS 14071:2014Environmental management Life cycle assessment Criticalreview processes and reviewercompetencies: Additionalrequirements and guidelines toISO 14044:2006PD CEN ISO/TS 14071:2016 PUBLISHED DOCUMENTNational forewordThis Published Docu

2、ment is the UK implementation of CEN ISO/TS 14071:2016. It is identical to ISO/TS 14071:2014. It supersedes PD ISO/TS 14071:2014.The UK participation in its preparation was entrusted to Technical Committee SES/1/5, Environmental Management.A list of organizations represented on this committee can be

3、 obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 91359 4ICS 13.020.60Complian

4、ce with a British Standard cannot confer immunity from legal obligations.This Published Document was published under the authority of the Standards Policy and Strategy Committee on 31 May 2014.Amendments/corrigenda issued since publicationDate Text affected30 April 2016 This corrigendum renumbers PD

5、 ISO/TS 14071:2014 as PD CEN ISO/TS 14071:2016TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 14071 February 2016 ICS 13.020.60 English Version Environmental management - Life cycle assessment - Critical review processes and reviewer competencies: Additional requir

6、ements and guidelines to ISO 14044:2006 (ISO/TS 14071:2014) Management environnemental - Analyse du cycle de vie - Processus de revue critique et comptences des vrificateurs: Exigences et lignes directrices supplmentaires lISO 14044:2006 (ISO/TS 14071:2014) Umweltmanagement - kobilanz - Prozesse der

7、 Kritischen Prfung und Kompetenzen der Prfer: Zustzliche Anforderungen und Anleitungen zu ISO 14044:2006 (ISO/TS 14071:2014) This Technical Specification (CEN/TS) was approved by CEN on 25 January 2016 for provisional application. The period of validity of this CEN/TS is limited initially to three y

8、ears. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS availa

9、ble promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached. CEN members are the national standards bodies of Austria, B

10、elgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Swi

11、tzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN natio

12、nal Members. Ref. No. CEN ISO/TS 14071:2016 EPD CEN ISO/TS 14071:2016CEN ISO/TS 14071:2016 (E)CEN ISO/TS 14071:2016 (E) 3 European foreword The text of ISO/TS 14071:2014 has been prepared by Technical Committee ISO/TC 207 “Environmental management” of the International Organization for Standardizati

13、on (ISO) and has been taken over as CEN ISO/TS 14071:2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELE

14、C Internal Regulations, the national standards organizations of the following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary,

15、 Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO/TS 14071:2014 has been approved by CEN as CEN ISO/TS 14071:2016 without an

16、y modification. PD ISO/TS 14071:2014 ISO 2014Environmental management Life cycle assessment Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006Management environnemental Analyse du cycle de vie Processus de revue critique et comptences des vr

17、ificateurs: Exigences et lignes directrices supplmentaires lISO 14044:2006TECHNICAL SPECIFICATIONISO/TS14071First edition2014-06-01Reference numberISO/TS 14071:2014(E)PD CEN ISO/TS 14071:2016CEN ISO/TS 14071:2016 (E)PD ISO/TS 14071:2014ISO/TS 14071:2014(E)ii ISO 2014 All rights reservedCOPYRIGHT PRO

18、TECTED DOCUMENT ISO 2014All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Per

19、mission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandPD ISO/TS 14071:2014ISO/TS 1

20、4071:2014(E)ii ISO 2014 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2014All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the intern

21、et or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso

22、.orgPublished in SwitzerlandEnvironmental management Life cycle assessment Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:20061 ScopeThis Technical Specification provides additional specifications to ISO 14040:2006 and ISO 14044:2006. It prov

23、ides requirements and guidelines for conducting a critical review of any type of LCA study and the competencies required for the review.This Technical Specification provides: details of a critical review process, including clarification with regard to ISO 14044:2006; guidelines to deliver the requir

24、ed critical review process, linked to the goal of the life cycle assessment (LCA) and its intended use; content and deliverables of the critical review process; guidelines to improve the consistency, transparency, efficiency and credibility of the critical review process; the required competencies f

25、or the reviewer(s) (internal, external and panel member); the required competencies to be represented by the panel as a whole.This Technical Specification does not cover the applications of LCA (as illustrated in ISO 14040:2006, Figure 1).2 Normative referencesThe following documents, in whole or in

26、 part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 14040:2006, Environmental management Life c

27、ycle assessment Principles and frameworkISO 14044:2006, Environmental management Life cycle assessment Requirements and guidelines3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1independent internal expertcompetent person, employed in a full-tim

28、e or part-time role the commissioner of the LCA study (3.4) or by the practitioner of the LCA study (3.6), but not involved in defining the scope or conducting the LCA studyNote 1 to entry: An expert is considered to be involved if he/she is part of the commissioners or practitioners project team.TE

29、CHNICAL SPECIFICATION ISO 2014 All rights reserved 1PD CEN ISO/TS 14071:2016ISO/TS 14071:2016 (E) ISO 2014 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Critical review process and tasks 34.1 Defining the scope of the cri

30、tical review 34.2 Selecting, contracting and replacing external reviewer(s) . 34.3 Critical review process . 44.4 Validity of critical review statement and report 54.5 Critical review report and critical review statement preparation . 54.6 Revision of an existing critical review 74.7 Critical review

31、 tasks . 75 Reviewer(s) competencies . 8Annex A (informative) Template for critical review report 9Annex B (informative) Example of self-declaration of reviewer independence and competencies 10Bibliography .11PD CEN ISO/TS 14071:2016 ISO/TS 14071:2014(E)ForewordISO (the International Organization fo

32、r Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the

33、 right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The proced

34、ures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial

35、 rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights id

36、entified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanatio

37、n on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document i

38、s Technical Committee ISO/TC 207, Environmental management, Subcommittee SC 5, Life cycle assessment.iv ISO 2014 All rights reservedPD CEN ISO/TS 14071:2016 ISO/TS 14071:2014(E)IntroductionFor life cycle assessment, critical review is the conformity assessment approach according to ISO 14040 and ISO

39、 14044. These standards contain the overarching requirements for critical review in concise form.Based on these requirements, a common critical review practice emerged that satisfied stakeholders. For the mandatory case of life cycle assessment (LCA) studies intended to be used in comparative assert

40、ions intended to be disclosed to the public, the performance of a critical review is established as key feature for the acceptance of the study by stakeholders. However, even in the broad range of applications of LCA, for which a critical review is not mandatory, the commissioners of the LCA study o

41、ften decide today to perform a voluntary critical review to improve the robustness of their studies and to increase credibility.It is one of the key features of critical review that it does not relate to an accreditation scheme, but ensures quality by making the individual reviewer personally respon

42、sible for the work and by giving priority to the content rather than the form.Because of the increasing use of LCA itself, as well as the broader application in tools like carbon footprinting or upcoming labelling initiatives, it is the intention of this Technical Specification to document the estab

43、lished critical review practice in a more comprehensive way by providing additional requirements and guidelines for conducting a critical review and the competencies required.This Technical Specification might be applicable to other standards that require independent review of LCA-based procedures a

44、nd information (e.g. ISO 14045, ISO 14025, ISO/TS 14067), but might need to be adapted to the specific fields of application. Other reference standards can be included in the critical review process.This Technical Specification does not apply to critical reviews performed prior to its publication. I

45、SO 2014 All rights reserved vPD CEN ISO/TS 14071:2016 ISO/TS 14071:2014(E)PD CEN ISO/TS 14071:2016 ISO/TS 14071:2014(E)3.2independent external expertcompetent person, not employed in a full-time or part-time role by the commissioner of the LCA study (3.4) or the practitioner of the LCA study (3.6),

46、and not involved in defining the scope or conducting the LCA studyNote 1 to entry: An expert is considered to be involved if he/she is part of the commissioners or practitioners project team or has vested financial, political or other interests in the outcome of the study.3.3panel memberreviewer (3.

47、10) taking part in a critical review panel3.4commissioner of the LCA studyorganization (or group of organizations) that finances the LCA study according to ISO 14040 and ISO 140443.5commissioner of the critical revieworganization (or group of organizations) that finances the critical review of the L

48、CA study according to ISO 14040 and ISO 14044Note 1 to entry: Financing the review is not restricted to contracting the reviewers (3.10). The contract may be carried out by a third party, e.g. the practitioner of the LCA study (3.6) or the commissioner of the LCA study (3.4).3.6practitioner of the L

49、CA studyorganization (or group of organizations) that performs the LCA study according to ISO 14040 and ISO 14044Note 1 to entry: An organization can act as the commissioner of the LCA study (3.4), the commissioner of the critical review (3.5) and/or the practitioner of the LCA study at the same time.3.7critical review reportdocumentation of the critical review process and findings, including detailed comments from the reviewer(s) (3.10) or the critical review panel, as well as corresponding responses