EN ISO 11011-2015 en Compressed air - Energy efficiency - Assessment《压缩空气 能效评估(ISO 11011 2013)》.pdf

《EN ISO 11011-2015 en Compressed air - Energy efficiency - Assessment《压缩空气 能效评估(ISO 11011 2013)》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 11011-2015 en Compressed air - Energy efficiency - Assessment《压缩空气 能效评估(ISO 11011 2013)》.pdf（62页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationCompressed air Energyefficiency AssessmentBS EN ISO 11011:2015BS EN ISO 11011:2015National forewordThis British Standard is the UK implementation of EN ISO 11011:2015. It is identical to ISO 11011:2013. It supersedes BS ISO 11011:2013 which is withdrawn.The UK participation

2、in its preparation was entrusted to Technical Committee MCE/8, Compressors, pneumatic tools, pneumatic machines and vacuum technology.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provi

3、sions of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 90397 7ICS 23.140Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published u

4、nder the authority of the Standards Policy and Strategy Committee on 30 September 2013.Amendments/corrigenda issued since publicationDate Text affected31 May 2015 Thiscorgendumbrs BSIO10:23 asBS EN ISO 11011:2015BRITISH STANDARDEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11011 March 201

5、5 ICS 23.140 English Version Compressed air - Energy efficiency - Assessment (ISO 11011:2013) Air comprim - Efficacit nergtique - valuation (ISO 11011:2013) Druckluft - Energieeffizienz - Bewertung (ISO 11011:2013)This European Standard was approved by CEN on 19 March 2015. CEN members are bound to

6、comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CEN

7、ELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has th

8、e same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxemb

9、ourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussel

10、s 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11011:2015 Eii ISO 2013 All rights reservedForeword The text of ISO 11011:2013 has been prepared by Technical Committee ISO/TC 118 “Compressors and pneumatic tools, machine

11、s and equipment” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 11011:2015 by Technical Committee CEN/TC 232 “Compressors, vacuum pumps and their systems” the secretariat of which is held by SIS. This European Standard shall be given the status of a nat

12、ional standard, either by publication of an identical text or by endorsement, at the latest by September 2015, and conflicting national standards shall be withdrawn at the latest by September 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of

13、 patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria

14、, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey

15、 and the United Kingdom. Endorsement notice The text of ISO 11011:2013 has been approved by CEN as EN ISO 11011:2015 without any modification. BS EN ISO 11011:2015 EN ISO 11011:2015 (E) ISO 2013 All rights reserved iiiContents PageForeword vIntroduction vi1 Scope . 12 Normative references 13 Terms a

16、nd definitions . 13.1 General . 23.2 Flow 33.3 Pressure 43.4 Storage . 53.5 Volume 54 Roles and responsibilities 64.1 Identification of assessment team members 64.2 Site management support . 74.3 Communications 74.4 Access to equipment, resources, and information . 74.5 Assessment objectives and sco

17、pe . 74.6 Identification of other assessment team members . 74.7 Objective check . 75 Assessment methodology 85.1 General . 85.2 Systems engineering methods . 85.3 Systems engineering process . 85.4 System assessment process . 96 Parameters and their determination .106.1 General 106.2 Measurement .

18、106.3 Pressure . 106.4 Flow rate 116.5 Power . 127 Initial data collection and evaluation 137.1 General 137.2 Plant background . 137.3 Plant function 137.4 Compressed air system definition . 137.5 Inventory of key end-use air demands 137.6 Heat recovery 137.7 Baseline period and duration of data log

19、ging .147.8 Energy use 147.9 Compressed air system supply efficiency . 147.10 System volume . 147.11 Pressure . 157.12 Flowrate . 157.13 Critical air demands 157.14 Compressed air waste 157.15 Air treatment . 157.16 Compressor control .167.17 Storage 167.18 Maintenance .167.19 Ambient intake conditi

20、ons .168 Analysis of data from assessment 168.1 General 16BS EN ISO 11011:2015 EN ISO 11011:2015 (E)iv ISO 2013 All rights reserved8.2 Baseline profiles . 178.3 System volume . 198.4 Pressure profile . 198.5 Perceived high-pressure demand 218.6 Demand profile 228.7 Critical air demands 238.8 Compres

21、sed air waste 248.9 Optimized air treatment 258.10 Reduced system operating pressure .268.11 Balance of supply and demand 278.12 Maintenance opportunities . 278.13 Heat recovery opportunities 289 Reporting and documentation of assessment findings .289.1 Assessment report 289.2 Confidentiality 299.3

22、Energy-saving opportunities . 299.4 Data for third-party review . 29Annex A (informative) Introduction to energy assessment .30Annex B (informative) Assessment activities General .32Annex C (informative) Assessment activities Supply 37Annex D (informative) Assessment activities Transmission .43Annex

23、 E (informative) Assessment activities Demand 47Annex F (informative) Competencies 50Bibliography .51BS EN ISO 11011:2015 EN ISO 11011:2015 (E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of prep

24、aring International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in

25、liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC

26、Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directivesAttention is drawn to the possibility that some

27、 of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarat

28、ions received. www.iso.org/patentsAny trade name used in this document is information given for the convenience of users and does not constitute an endorsement.The committee responsible for this document is ISO/TC 118, Compressors and pneumatic tools, machines and equipment, Subcommittee SC 6, Air c

29、ompressors and compressed air systems. ISO 2013 All rights reserved vBS EN ISO 11011:2015 EN ISO 11011:2015 (E)IntroductionThis International Standard has been developed with reference to available documentation1)(see Bibliography) relating to energy assessment of compressed air systems.This Interna

30、tional Standard is produced to support the objectives of energy management for those organisations utilizing compressed air and wishing to improve the energy efficiency of such systems. Remembering the words of Lord Kelvin who said in 1883, “If you cannot measure it, you cannot improve it”, this Int

31、ernational Standard aims to assist with measurement and provide the knowledge to enable improvement.The prime consideration for any compressed air system is the ability to generate air with the least amount of energy. Having done this, the next consideration is to transmit energy from the point of g

32、eneration to the point of use with the least loss. The final consideration is to eliminate waste and use the least amount of air for the production process.This International Standard uses speciality terms which relate the needs of assessment activities to those of compressed air systems. Many terms

33、 will appear new to the users of this International Standard who are familiar with general compressed air terms.A general introduction to energy assessment is given in Annex A.1) Extracts from ASME EA-4-2010 were used with permission from ASME. The core elements used are from Scope and Introduction,

34、 Organizing the Assessment, Analysis of Data From the Assessment, Reporting and Documentation, and Mandatory Appendices I, Preliminary Data Collection Matrix.vi ISO 2013 All rights reservedBS EN ISO 11011:2015 EN ISO 11011:2015 (E)Compressed air Energy efficiency AssessmentWARNING Users of this Inte

35、rnational Standard are advised that energy-related judgements should not compromise safety issues.1 ScopeThis International Standard sets requirements for conducting and reporting the results of a compressed air system assessment (hereafter referenced as an “assessment”) that considers the entire sy

36、stem, from energy inputs to the work performed as the result of these inputs.This International Standard considers compressed air systems as three functional subsystems: supply which includes the conversion of primary energy resource to compressed air energy; transmission which includes movement of

37、compressed air energy from where it is generated to where it is used; demand which includes the total of all compressed air consumers, including productive end-use applications and various forms of compressed air waste.This International Standard sets requirements for analysing the data from the ass

38、essment, reporting and documentation of assessment findings, and identification of an estimate of energy saving resulting from the assessment process.This International Standard identifies the roles and responsibilities of those involved in the assessment activity.This International Standard provide

39、s indicative information in Annexes B, C, D, and E of the type of data to be collected to assist in a successful assessment. The information provided is not exhaustive and therefore is not intended to restrict the inclusion of other data. The form and presentation of the information given in the ann

40、exes is also not intended to restrict the manner of presentation of the reporting to the client.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited appl

41、ies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 1217, Displacement compressors Acceptance testsISO 5598, Fluid power systems and components Vocabulary3 Terms and definitionsFor the purposes of this document, the terms and definitions

42、given in ISO 1217 and ISO 5598 and the following apply.INTERNATIONAL STANDARD ISO 2013 All rights reserved 1BS EN ISO 11011:2015 EN ISO 11011:2015 (E)3.1 General3.1.1air treatmentany process provided for the purpose of separation and purification of the compressed air3.1.2artificial demandexcess air

43、 consumed by a systems unregulated or poorly regulated uses due to operating at a pressure in excess of actual requirements3.1.3assessment teamauthority to fulfil roles and responsibility of the assessment having appropriate functions and knowledge3.1.4baselineset of typical operating period, work c

44、onditions, and performance parameters revealed by assessment and used for comparison of efficiency of measures recommended as a result of energy efficiency assessment procedures3.1.5compressed air point of usecomponents using the pneumatic energy for physical or chemical actions3.1.6compressed air s

45、ystemsgroup of subsystems comprising integrated sets of components, including air compressors, treatment equipment, controls, piping, pneumatic tools, pneumatically powered machinery, and process applications utilizing compressed air3.1.7compressed air system assessmentactivity which considers all c

46、omponents and functions, from energy inputs (SUPPLY SIDE) to the work performed (DEMAND SIDE) as the result of these inputs; undertaken to observe, measure, and document energy reduction and performance improvement opportunities in a compressed air system3.1.8data loggingmeasurement of physical para

47、meters while tabulating a periodic log (record) of their numerical value using time-aligned data frames for the plurality of recorded parametersNote 1 to entry: Two types of data logging are:a) dynamics: data logging while creating a sufficiently high frequency periodic log (record) so as to investi

48、gate the time-based variation of measured physical parametersb) trending: data logging during an extended duration of time for the purpose of investigating regularities, irregularities, or both in the measured physical parameters throughout time3.1.9demandtotal of all compressed air consumers, inclu

49、ding productive end-use applications and various forms of compressed air waste3.1.10drawdowncircumstance observed in a compressed air system that is characterized by continual pressure decay arising from a compressed air system event whereby air demand exceeds the capacity of supply2 ISO 2013 All rights reservedBS EN ISO 11011:2015 EN ISO 11011:2015 (E)3.1.11operating periodgroup of typical time periods that share similar compressed air energy and compressed air demand profilesNote 1 to entry: See 3.1.15.3.1.12spot check