EN ISO 10434-2004 en Bolted bonnet steel gate valves for the petroleum petrochemical and allied industries《石油和天然气工业用螺栓连接钢制闸阀 ISO 10434-2004》.pdf

《EN ISO 10434-2004 en Bolted bonnet steel gate valves for the petroleum petrochemical and allied industries《石油和天然气工业用螺栓连接钢制闸阀 ISO 10434-2004》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 10434-2004 en Bolted bonnet steel gate valves for the petroleum petrochemical and allied industries《石油和天然气工业用螺栓连接钢制闸阀 ISO 10434-2004》.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 10434:2004 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries The European Standard EN ISO 10434:2004 has the status of a British Standard ICS 75.180.20 BS EN ISO 10434:2004 This British Standard was published under the authority of the

2、Standards Policy and Strategy Committee on 30 July 2004 BSI 30 July 2004 ISBN 0 580 44183 0 National foreword This British Standard is the official English language version of EN ISO 10434:2004. It is identical with EN ISO 10434:2004. It supersedes BS 1414:1975 which is withdrawn. The UK participati

3、on in its preparation was entrusted by Technical Committee PSE/7, Industrial valves, to Subcommittee PSE/7/9, Valves for the petroleum industry, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The

4、 British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standard

5、s Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the res

6、ponsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front c

7、over, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to v, a blank page, pages 1 to 30, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No.

8、Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO10434 July2004 ICS75.180.20 Englishversion Boltedbonnetsteelgatevalvesforthepetroleum,petrochemical andalliedindustries(ISO10434:2004) Robinetsvannesenacierchapeauboulonnpourles industriesduptrole,delaptrochimieetlesindustries connexes

9、(ISO10434:2004) SchieberausStahlmitgeflanschtemOberteilfrdieErdl undErdgasindustrie(ISO10434:2004) ThisEuropeanStandardwasapprovedbyCENon1July2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwit

10、houtanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityo

11、faCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherl

12、ands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwide

13、forCENnationalMembers. Ref.No.ENISO10434:2004:E EN ISO 10434:2004 (E) 2 Foreword This document (EN ISO 10434:2004) has been prepared by Technical Committee ISO/TC 153 “Valves“ in collaboration with Technical Committee CEN/TC 69 “Industrial valves“, the secretariat of which is held by AFNOR. This Eur

14、opean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2005, and conflicting national standards shall be withdrawn at the latest by January 2005. According to the CEN/CENELEC Internal Regulations, the na

15、tional standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

16、Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 10434:2004 has been approved by CEN as EN ISO 10434:2004 without any modifications. ENISO10434:2004 Reference number ISO 10434:2004(E)INTERNATIONAL ADNATSDR ISO 14340 ceSond deition -40025

17、1-70 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries Robinets-vannes en acier chapeau boulonn pour les industries du ptrole, de la ptrochimie et les industries connexes Referecne unbmer OSI 43401:002)E(4 OSI 4002INTERNATIONAL STANDARD ISO 10434 Second edition 2

18、004-07-15 etloBd bonnte stag leeet valves t rofhe lortepueep ,mrtehcoa lacimdn deilla udniseirts iboRsten-vnnase ne carei cepahb uaoulnop nruo les sudnirties ud rtpoled ,e la prtcoihime et sel dniustrise cnnoxese ENISO10434:2004IS:43401 O4002(E) DPlcsid Fremia ihTs PDF file may ctnoian emdebt dedyfe

19、pcaes. In ccaocnadrw eith Aebods licensilop gnic,y this file mairp eb ynted iv roweb detu slahl ton ide ebtlnu deess the typefaces whice era hml era deddebicsnede to i dnanstlaled t noeh computfrep reormign tide ehtin.g In wodlnidaot gnhis file, trapise atpecc tiereht nser ehnopsiiblity fo not infri

20、igngn Aebods licensilop gnic.y ehT ISO tneClar Secrteiraat caceptl on siibality in this .aera Ai ebods a tredamafo kr Aebod SystemI sncotaropr.de teDails fo teh softwacudorp erts sut deo crtaee this PDF file cna f ebi dnuon tlareneG eh Info leratit evo the file; tP ehDc-Frtaeion marapterew setpo eri

21、mizde for irpnti.gn Evyre caer neeb sah taken to sneeru that the file is suitlbae fosu re yb ISO memdob rebeis. In tlnu ehikletneve y ttah lborp aem leratit gno it is f,dnuo plsaee inform ttneC ehlar Secrteiraat ta the serddaig sleb nevwo. ii ENISO10434:2004ISO 10434:2004(E) iiiContents Page Forewor

22、d iv Introduction v 1 Scope 1 2 Normative references . 1 3 Terms and definitions. 3 4 Pressure/temperature ratings 3 5 Design 3 6 Materials. 18 7 Testing, inspection and examination 21 8 Marking. 24 9 Preparation for despatch 25 Annex A (informative) Information to be specified by the purchaser . 27

23、 Annex B (informative) Identification of valve terms 28 Bibliography . 30 ENISO10434:2004ISO 10434:2004(E) iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is

24、 normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part

25、 in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to pr

26、epare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that

27、 some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10434 was prepared by Technical Committee ISO/TC 153, Valves, Subcommittee SC 1, Design, manufacture, marking and testing in collaboration

28、with Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries, Subcommittee SC 6, Processing equipment and systems. This second edition cancels and replaces the first edition (ISO 10434:1998), which has been technically revis

29、ed. ENISO10434:2004ISO 10434:2004(E) vIntroduction The purpose of this International Standard is to establish the basic requirements and practices for flanged and butt-welding end steel gate valves of bolted bonnet construction that parallel those given in American Petroleum Institute API Standard 6

30、00, eleventh edition, 2001 (ISO 10434:1998). It is not the purpose of this International Standard to replace ISO 6002 or any other International Standard that is not identified with petroleum refinery, petrochemical or natural gas industry applications. ENISO10434:2004ENISO10434:2004INTENRATIONAL TS

31、ANDADR IS:43401 O4002(E)1Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries 1 Scope This International Standard specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where corrosion, e

32、rosion and other service conditions would indicate a need for full port openings, heavy wall sections and large stem diameters. This International Standard sets forth the requirements for the following gate valve features: bolted bonnet; outside screw and yoke; rising stems; non-rising handwheels; s

33、ingle or double gate; wedge or parallel seating; metallic seating surfaces; flanged or butt-welding ends. It covers valves of the nominal sizes DN: 25; 32; 40; 50; 65; 80; 100; 150; 200; 250; 300; 350; 400; 450; 500; 600; corresponding to nominal pipe sizes NPS: 1; 11/4; 11/2; 2; 21/2; 3; 4; 6; 8; 1

34、0; 12; 14; 16; 18; 20; 24; and applies for pressure Class designations: 150; 300; 600; 900; 1500; 2500. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the

35、latest edition of the referenced document (including any amendments) applies. ISO 7-1, Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation ENISO10434:2004ISO 10434:2004(E) 2 ISO 5208, Industrial valves Pressure testing of valves ISO 5209, G

36、eneral purpose industrial valves Marking ISO 5210, Industrial valves Multi-turn valve actuator attachments ISO 5752, Metal valves for use in flanged pipe systems Face-to-face and centre-to-face dimensions ISO 9606-1, Approval testing of welders Fusion welding Part 1: Steels ISO 15607, Specification

37、and qualification of welding procedures for metallic materials Part 1: General rules ISO 15609-1, Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding 1)ISO 15610, Specification and qualification of welding procedures for me

38、tallic materials Qualification based on tested welding consumables ISO 15614-1, Specification and qualification of welding procedures for metallic materials Welding procedure test Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys ISO 15614-2, Specification and qualifi

39、cation of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys 2)ASME B1.1, Unified inch screw threads (UN and UNR thread form) ASME B1.5, Acme screw threads ASME B1.8, Stub acme screw threads ASME B1.12, Class 5 interference-fit thread ASM

40、E B1.20.1, Pipe threads, general purpose (inch) ASME B16.5, Pipe flanges and flanged fittings ASME B16.10, Face-to face and end-to-end dimensions of valves ASME B16.11, Forged fittings, socket-welding and threaded ASME B16.34:1996, Valves Flanged, threaded and welding end ASME B18.2.2, Square and he

41、x nuts Inch series ASME BPVC-IX, BPVC Section IX Welding and brazing qualifications ASTM A193, Standard specification for alloy-steel and stainless steel bolting materials for high temperature service ASTM A194, Standard specification for carbon and alloy steel nuts for bolts for high pressure or hi

42、gh temperature service, or both 1) To be published. (Replaces ISO 9956-2:1995) 2) To be published. (Replaces ISO 9956-4:1995) ENISO10434:2004ISO 10434:2004(E) 3ASTM A307, Standard specification for carbon steel bolts and studs, 60 000 PSI tensile strength MSS-SP-55, Quality standard for steel castin

43、gs for valves, flanges and fittings and other piping components Visual method for evaluation of surface irregularities 3 Terms and definitions For the purposes of this document, the definitions for pressure designation, Class, and nominal valve size NPS given in ASME B16.34, and the following apply.

44、 3.1 DN alphanumeric designation of size for components of a pipework system, which is used for reference purposes, comprising the letters DN followed by a dimensionless whole number which is indirectly related to the physical size, in millimetres, of the bore or outside diameter of the end connecti

45、ons ISO 6708:1995, definition 2.1 4 Pressure/temperature ratings 4.1 The pressure/temperature ratings applicable to valves specified in this International Standard shall be in accordance with those specified in the tables of ASME B16.34 for Standard Class for the applicable material specification an

46、d the applicable Class. Restrictions of temperature and pressure, for example, those imposed by special soft seals or special trim materials, shall be marked on the valve identification plate, see 8.4. 4.2 The temperature for a corresponding pressure rating is the maximum temperature of the pressure

47、-containing shell of the valve. In general, this temperature is the same as that of the contained fluid. The use of a pressure rating corresponding to a temperature other than that of the contained fluid is the responsibility of the user. 4.3 For temperatures below the lowest temperature listed in t

48、he pressure/temperature tables (see 4.1), the service pressure shall be no greater than the pressure for the lowest listed temperature. The use of valves at lower temperatures is the responsibility of the user. Consideration should be given to the loss of ductility and impact strength of many materials at low temperature. 4.4 Double seated valves, in some design configurations, may be capable of trapping liquid in the centre cavity of the valve when in the closed position. If sub