EN ISO 9241-13-1998 en Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 13 User Guidance《办公用视觉显示终端(VDTs)的人类工效学要求 第13部分 用户指南 ISO 9241-13-1998》.pdf

《EN ISO 9241-13-1998 en Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 13 User Guidance《办公用视觉显示终端(VDTs)的人类工效学要求 第13部分 用户指南 ISO 9241-13-1998》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 9241-13-1998 en Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 13 User Guidance《办公用视觉显示终端(VDTs)的人类工效学要求 第13部分 用户指南 ISO 9241-13-1998》.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD Ergonomic requirements for office work with visual display terminals (VDTS) - Part 13: User guidance The European Standard EN IS0 9241-131998 has the status of a British Standard ICs 13.180; 36.180 BS EN IS0 9241-13:1999 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYR

2、IGHT LAW BS EN IS0 9241-13:1999 been prepared under the direction of the Health and Environment Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 August 1999 AmdNo. O BSI 08-1999 ISBN O 580 28845 5 National foreword Date Comments This British

3、Standard is the English language version of EN IS0 9241-13:1998. It is identical with IS0 9241-131998. The UK participation in its preparation was entrusted by Technical Committee PH#, Applied ergonomics, to Subcommittee Pw9/6, User system interfaces, which has the responsibility to: - aid enquirers

4、 to understand the text; - present to the responsible internationalEuropean committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed - monitor related international and European developments and promulgate them in the UK. A list of organizations repr

5、esented on this subcommittee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC standards normally include an annex which iists normative references to international publications with their corresponding or European publications. The Bri

6、tish Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled International Standards Correspondence Index, or by using the Find facility of the BSI Standards Electronic Catalogue. Compliance

7、with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN IS0 title page, the EN IS0 foreword page, the IS0 titie page, pages ii to iv, pages 1 to 32, the annex ZA page, and a back cover. T

8、he BSI copyright notice displayed throughout this document indicates when the document was last issued. STD-BSL BSEhl IS0 924L-LI-ENGL 1999 S 3b24bb7 0787202 b4S EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IS0 9241 -1 3 July 1998 ICs 13.180; 35.180 Descriptors: see IS0 document English vers

9、ion Ergonomic requirements for off ice work with visual display terminals (VDTs) - Part 13: User guidance (IS0 9241 -1 3: 1998) Exigences ergonomiques pour travail de bureau avec terminaux crans de visulisation (TEV) - Partie 13 Guide gnral pour lutilisateur (IS0 9241 -13:1998) Ergonomische Anforder

10、ungen fr Brottigkeiin mit Bildschrimgerten - Teil 13: Benutzerhrung (IC0 9241- 13:1998) . This European Standard was approved by CEN on 30 May 1998. CEN members are bound to comply with the CENCENELEC Intemal Regulations which stipulate the conditions for gMng this European Standard the status of a

11、national standard without any aiteration. Up-to-date lists and bibliographd references concerning such natimal standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in an

12、y other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germa

13、ny, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPISCHES KOMITEE FOR NORMUNG Centrai Secretariat: rue de Stasoart, 36 6-1050 Brussels (8 1998 CEN All

14、 rights of exploitation in any form and by any means reserved worldwide for CEN national Members. _ Ref. No. EN IS0 9241-131998 E Foreword The text of the International Standard IS0 9241-1 3: 1998 has been prepared by Technical Committee ISOTTC 159 “Ergonomics“ in collaboration with CENES. This Euro

15、pean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 1999, and conflicting national standards shall be withdrawn at the latest by January 1999. According to the CENICENELEC Internal Regulations, the nat

16、ional standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.

17、Endorsement notice The text of the International Standard IS0 9241 -1 3: 1998 was approved by CEN as a European Standard without any modification. INTERNATIONAL STANDARD IS0 924111 3 First edition 1998-07-1 5 Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User

18、 guidance Exigences ergonomiques pour travail de bureau avec terminaux 8 crans de visualisation (TEV) - Partie 13: Guidage de lutilisateur Reference number IS0 9241-13:1998(E) Contents Page 1 2 3 4 5 6 7 8 9 Scope 1 Normative references . 1 Definitions . 2 4.1 4.2 4.3 Common guidance recommendations

19、 3 5.1 Description 3 5.2 General recommendations . 3 5.3 Prompts 5 6.1 Description 5 Feedback 6 7.1 Description 6 7.2 Feedback recommendations 6 Status information . 7 8.1 Description 7 8.2 Status recommendations 8 Error management 9 9.1 Description 9 9.2 Error prevention 9 9.3 Error correction by t

20、he system 10 9.4 Error management by the user . 10 9.5 Error messages 11 Application of this part of IS0 9241 2 Appropriateness of user guidance 2 Applying the recommendations 2 Evaluation of products 3 Phrasing of user guidance 4 6.2 Prompting recommendations . 5 10 On-line help 12 10.1 Description

21、 12 10.2 System-initiated help 12 10.3 User-initiated help . 13 loi4 Presentation of help information . 13 10.5 Help navigation and controls 14 10.6 Browsable help . 14 10.7 Context-sensitive help 15 Annex A (informative) Sample procedure for assessing applicability and adherence 17 Annex B (informa

22、tive) Bibliography 30 Descriptors: ergonomics. office machines. computer peripheral equipment. text processing. data terminal equipment. display devices.specifications. tules (instructions). instructions for use . ii Foreword IS0 (the International Organization for Standardization) is a worldwide fe

23、deration of national standards bodies (IS0 member bodies). The work of preparing Intemational Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that comm

24、ittee. Intemational organizations, governmental and non- governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the t

25、echnical committees are circulated to the member bodies for voting. Publication as an Intemational Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IS0 9241 -13 was prepared by Technical Committee ISOTTC 159, Ergonomics, Subcommittee SC 4, Ergon

26、omics of hUman- system interaction. IS0 9241 consists of the following parts, under the general title Ergonomic requirements for office work with visual display terminals (VDTs): - Part 7: General introduction - - - Part 4: Keyboar requirements - - - - Part 2: Guidance on task requirements Part 3: V

27、isual display requirements Part 5: Workstation layout and postural requirements Part 6: Guidance on the work environment Part 7: Requirements for display with reflections Part 8: Requirements for displayed colours Part 9: Requirements for nonkeyboar input devices Part 1 O: Dialogue principles Part 7

28、 1: Guidance on usability Part 12: Presentation of information Part 13: User guidance Part 14: Menu dialogues Part 15: Command dialogues Part 16: Direct manipulation dialogues Part 17: Form fining dialogues Annexes A and 6 of this part of IS0 9241are information only. iii STD-BSI BS EN IS0 7241-13-E

29、NGL 1777 Lb24bb 0787207 127 W EN IS0 9241-13:1998 Introduction This part of IS0 9241 deals with user guidance aspects of software user interfaces. The main purpose of user guidance is to aid the users interaction with the system by - promoting efficient system use; - avoiding unnecessary mental work

30、load; - providing support to users to manage error situations; and - providing support for users of different skill levels. This part of IS0 9241 serves the following types of users: - the designer of the user guidance, who will apply this pari of IS0 9241 during the development process; - designers

31、 of user guidance development tools to be used by dialogue designers; - the buyer, who will reference this pari of IS0 9241 during the product procurement process, and whose end-users will gain from the potential benefits provided by this part; and - those responsible for ensuring that products meet

32、 the recommen- dations in this part of IS0 9241. The ultimate beneficiary of this part of IS0 9241 will be the end-user at the visual display terminal (VDT). It was the needs of this user that provided the ergonomic recommendations in this part of IS0 9241. Although it is unlikely that the end-user

33、will read this part or even know of its existence, its application should provide user interfaces that are more usable, consistent and that enable greater productivity. Application of this part of IS0 9241 involves an understanding of the intended user, the user environment and tasks. User tasks sho

34、uld be listed and key tasks, defined as the most frequent and important tasks, should be explicitly identified. Recommendations on how to use this part of IS0 9241 can be found in Informative Annex A. For practical reasons, the following structure has been chosen for presenting the user guidance rec

35、ommendations: - common guidance recommendations (see clause 5), - prompts (see clause 6), - feedback (see clause 7), - status information (see clause 8), - error management (see clause 9), - on-line help (see clause 1 O). iv - - ST3-BSI BS EN IS0 72ql-13-ENGL 1977 m Lb2qbbS 0787202 Ob3 EN IS0 9241-1

36、3:1998 Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User guidance 1 Scope This part of IS0 9241 provides recommendations for user guidance attributes of software user interfaces and their evaluation. User guidance as defined in this part of IS0 9241 is infor

37、mation additional to the regular user-computer- dialogue that is provided to the user on request or is automatically provided by the system. In addition to the general guidance provided in this part of IS0 9241, recommendations concerning dialogue-specific user guidance are provided in IS0 9241-12,

38、IS0 9241-14, IS0 9241-15, IS0 9241-16 and IS0 9241-17. This part of IS0 9241 is applicable to interaction components that aid users in recovering from error condflions. User guidance as covered by this part of IS0 9241 includes recommendations specific to prompts, feedback and status, error manageme

39、nt and on-line help as well as general recommendations common to all these ypes of user guidance. While user support can be provided via other means (e.g., on-line tutorials, on-line documentation, intelligent system performance aids) these types of support are not addressed by this part of IS0 9241

40、 -13. The recommendations in this part of IS0 9241 are formulated to be independent of applications, environment, or implementation technology. They correspond to typical situations involving special needs for information and actions. As with other parts of IS0 9241, this part of IS0 9241 can apply

41、in all or in part. For example, applications that do not have browsable help would not need to follow recommendations concerning this class of user guidance. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this part of

42、 IS0 9241. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of IS0 9241 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IE

43、C and IS0 maintain registers of currently valid International Standards. IS0 9241 -12:-1), Ergonomic requirements for office work with visual display terminals (VDTs) - Pari 12: Presentation of information. IS0 9241-14:1997, Ergonomic requirements for office work with visual display terminals (VDTs)

44、 - Part 14: Menu dialogues. is0 9241-15:1997, Ergonomic requirements for ofice work with visual display terminals (VDTS) - Pari 15: Command Dialogues. IS0 9241-16:-1), Ergonomic requirements for office work with visual display terminals (VDTS) - Part 76: Direcf manipulation dialogues. IS0 9241 -1 7:

45、-V, Ergonomic requirements for office work wifh visual display terminals (VDTs) - Part 7 7: Form filling dialogues. I) To be published. 1 STD-BSI BS EN ISC 9241-13-ENGL 1779 1h24bb7 0787209 TTT D EN IS0 9241-13:1998 3 Definitions For the purposes of this part of IS0 9241, the following definitions a

46、pply. 3.1 browsable help: Help in which access to help is independent of the current task context. Help topics can be accessed in the order and sequence desired by the user. 3.2 context-sensitive help: Help in which the help text or range of help topics is derived from the contextual information ass

47、ociated with the users task, users last input, selected object, current location or the current mode within the system or application. 3.3 error: Mismatch between the users goal and the response of the system. Errors can include navigation errors, syntax errors, conceptual errors, etc. 3.4 error man

48、agement: Means to support the user in error detection, error explanation, or error recovery. 3.5 error prevention: Means to minimize the probability of the occurrence of errors. 3.6 feedback Output presented to the user by the system in reaction to the users input or a system event. 3.7 guidance: Di

49、alogue elements that aid the users in achieving their intended results. Guidance can aid users in discovering the capabilities of a system, enable the users to generate a plan for accomplishing their goals, assist the users in accomplishing a goal, or help the users to manage error situations. 3.8 on-line help: Additional user guidance information beyond prompting, feedback, status, and error messages that can be obtained at the users initiative or at the initiative of the system. Information about features of the system and dialogue and ho