EN 62053-23-2003 en Electricity metering equipment (a c ) Particular requirements Part 23 Static meters for reactive energy (classes 2 and 3) (Incorporates Amendment A1 2017)《交流电测量.pdf

《EN 62053-23-2003 en Electricity metering equipment (a c ) Particular requirements Part 23 Static meters for reactive energy (classes 2 and 3) (Incorporates Amendment A1 2017)《交流电测量.pdf》由会员分享，可在线阅读，更多相关《EN 62053-23-2003 en Electricity metering equipment (a c ) Particular requirements Part 23 Static meters for reactive energy (classes 2 and 3) (Incorporates Amendment A1 2017)《交流电测量.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 62053-23:2003 Incorporating Corrigendum No. 1 Electricity metering equipment (a.c.) Particular requirements Part 23: Static meters for reactive energy (classes 2 and 3) The European Standard EN 62053-23:2003 has the status of a British Standard ICS 17.220.20 BS EN 62053-23:200

2、3 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 3 July 2003 BSI 24 February 2004 ISBN 0 580 42177 5 National foreword This British Standard is the official English language version of EN 62053-23:2003. It is identical with IEC 62053-23:2003

3、. It supersedes BS EN 61268:1996 which is obsolescent and will be withdrawn on 1 March 2006. The UK participation in its preparation was entrusted to Technical Committee PEL/13, Electricity meters, which has the responsibility to: A list of organizations represented on this committee can be obtained

4、 on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of t

5、he BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid en

6、quirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This d

7、ocument comprises a front cover, an inside front cover, the EN title page, pages 2 to 19 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments 15024 Corrigendum No. 1 24 February 200

8、4 Correction to supersession informationEUROPEAN STANDARD EN 62053-23 NORME EUROPENNE EUROPISCHE NORM March 2003 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue d

9、e Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62053-23:2003 E ICS 17.220.20 Supersedes EN 61268:1996English version Electricity metering equipment (a.c.) Particular requirements Part 23: Sta

10、tic meters for reactive energy (classes 2 and 3) (IEC 62053-23:2003) Equipement de comptage de llectricit (c.a.) Prescriptions particulires Partie 23: Compteurs statiques dnergie ractive (classes 2 et 3) (CEI 62053-23:2003) Wechselstrom-Elektrizittszhler - Besondere Anforderungen Teil 23: Elektronis

11、che Blindverbrauchszhler der Genauigkeitsklassen 2 und 3 (IEC 62053-23:2003) This European Standard was approved by CENELEC on 2003-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a na

12、tional standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version

13、 in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmar

14、k, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. Foreword The text of document 13/1284/FDIS, future edition 1 of IEC 62053-23, prepared by IEC TC 13, Equipment for electri

15、cal energy measurement and load control, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62053-23 on 2003-03-01. This European Standard supersedes EN 61268:1996. The following dates were fixed: latest date by which the EN has to be implemented at national level by pu

16、blication of an identical national standard or by endorsement (dop) 2003-12-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2006-03-01 Annexes designated “normative“ are part of the body of the standard. Annexes designated “informative“ are given for

17、 information only. In this standard, annexes A, B and ZA are normative and annex C is informative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62053-23:2003 was approved by CENELEC as a European Standard without any modification. _ Page2 EN6205

18、323:2003 CONTENTS INTRODUCTION.4 1 Scope.5 2 Normative references.5 3 Terms and definitions .5 4 Standard electrical values 6 5 Mechanical requirements6 6 Climatic conditions .6 7 Electrical requirements.6 7.1 Power consumption.6 7.2 Influence of short-time overcurrents 7 7.3 Influence of self-heati

19、ng 7 7.4 AC voltage test8 8 Accuracy requirements.9 8.1 Limits of error due to variation of the current .9 8.2 Limits of error due to influence quantities 9 8.3 Test of starting and no-load condition11 8.4 Meter constant12 8.5 Accuracy test conditions12 8.6 Interpretation of test results.13 Annex A

20、(normative) Test circuit diagram for d.c. component.14 Annex B (normative) Electromagnet for testing the influence of externally produced magnetic fields .16 Annex C (informative) Geometric representation of active and reactive power .17 Annex ZA (normative) Normative references to international pub

21、lications with their corresponding European publications .19 Figure A.1 Test circuit diagram for half-wave rectification 14 Figure A.2 Half-wave rectified wave-form.15 Figure B.1 Electromagnet for testing the influence of externally produced magnetic fields.16 Figure C.1 Recommended geometric repres

22、entation17 Figure C.2 Alternative geometric representation 18 Table 1 Power consumption in voltage circuits for single-phase and polyphase meters including the power supply 6 Table 2 Power consumption in current circuits .7 Table 3 Variations due to short-time overcurrents 7 Table 4 Variations due t

23、o self-heating8 Table 5 AC voltage tests8 Table 6 Percentage error limits (single-phase meters and polyphase meters with balanced loads) 9 Table 7 Percentage error limits (polyphase meters carrying a single-phase load, but with balanced polyphase voltages applied to voltage circuits) .9 Table 8 Infl

24、uence quantities .10 Table 9 Starting current .12 Table 10 Voltage and current balance12 Table 11 Reference conditions.13 Table 12 Interpretation of test results.13 Page3 EN6205323:2003 INTRODUCTION This part of IEC 62053 is to be used with relevant parts of the IEC 62052, IEC 62053 and IEC 62059 se

25、ries, Electricity metering equipment: IEC 62052-11:2003, Electricity metering equipment (a.c.) General requirements, tests and test conditions Part 11: Metering equipment IEC 62053-11:2003, Electricity metering equipment (a.c.) Particular requirements Part 11: Electromechanical meters for active ene

26、rgy (classes 0,5, 1 and 2) Replaces particular requirements of IEC 60521: 1988 (2 ndedition) IEC 62053-21:2003, Electricity metering equipment (a.c.) Particular requirements Part 21: Static meters for active energy (classes 1 and 2) Replaces particular requirements of IEC 61036: 2000 (2 ndedition) I

27、EC 62053-22:2003, Electricity metering equipment (a.c.) Particular requirements Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) Replaces particular requirements of IEC 60687: 1992 (2 ndedition) IEC 62053-31:1998, Electricity metering equipment (a.c.) Particular requirements Part 3

28、1: Pulse output devices for electromechanical and electronic meters (two wires only) IEC 62053-61:1998, Electricity metering equipment (a.c.) Particular requirements Part 61: Power consumption and voltage requirements IEC 62059-11:2002, Electricity metering equipment (a.c.) Dependability Part 11: Ge

29、neral concepts IEC 62059-21:2002, Electricity metering equipment (a.c.) Dependability Part 21: Collection of meter dependability data from the field This part is a standard for type testing electricity meters. It covers the particular requirements for meters, being used indoors and outdoors. It does

30、 not deal with special implementations (such as metering-part and/or displays in separate housings). This standard is intended to be used in conjunction with IEC 62052-11. When any requirement in this standard concerns an item already covered in IEC 62052-11, the requirements of this standard take p

31、recedence over the requirements of IEC 62052-11. This standard distinguishes: between accuracy class index 2 and accuracy class index 3 meters; between protective class I and protective class II meters; between meters for use in networks equipped with or without earth fault neutralizers. The test le

32、vels are regarded as minimum values that provide for the proper functioning of the meter under normal working conditions. For special application, other test levels might be necessary and should be agreed on between the user and the manufacturer. Page4 EN6205323:2003 ELECTRICITY METERING EQUIPMENT (

33、AC) PARTICULAR REQUIREMENTS Part 23: Static meters for reactive energy (classes 2 and 3) 1 Scope This part of IEC 62053 applies only to newly manufactured static var-hour meters of accuracy classes 2 and 3, for the measurement of alternating current electrical reactive energy in 50 Hz or 60 Hz netwo

34、rks and it applies to their type tests only. For practical reasons, this standard is based on a conventional definition of reactive energy for sinusoidal currents and voltages containing the fundamental frequency only. It applies only to static var-hour meters for indoor and outdoor application cons

35、isting of a measuring element and register(s) enclosed together in a meter case. It also applies to operation indicator(s) and test output(s). If the meter has a measuring element for more than one type of energy (multi-energy meters), or when other functional elements, like maximum demand indicator

36、s, electronic tariff registers, time switches, ripple control receivers, data communication interfaces, etc. are enclosed in the meter case, then the relevant standards for these elements also apply. It does not apply to: var-hour meters where the voltage across the connection terminals exceeds 600

37、V (line- to-line voltage for meters for polyphase systems); portable meters; data interfaces to the register of the meter; reference meters. The dependability aspect is covered by the documents of the IEC 62059 series. 2 Normative references The following referenced documents are indispensable for t

38、he application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60736:1982, Testing equipment for electrical energy meters IEC 62052-11:2003, Electricity metering equi

39、pment (a.c.) General requirements, tests and test conditions Part 11: Metering equipment IEC 62053-61:1998, Electricity metering equipment (a.c.) General requirements, tests and test conditions Power consumption and voltage requirements 3 Terms and definitions For the purposes of this document, the

40、terms and definitions given in IEC 62052-11 apply. NOTE For direction of flow and sign of reactive power, see Annex C. Page5 EN6205323:2003 4 Standard electrical values The values given in IEC 62052-11 apply. 5 Mechanical requirements The requirements of IEC 62052-11 apply. 6 Climatic conditions The

41、 conditions given in IEC 62052-11 apply. 7 Electrical requirements In addition to the electrical requirements in IEC 62052-11, meters shall fulfil the following requirements. 7.1 Power consumption The power consumption in the voltage and current circuit shall be determined at reference values of the

42、 influence quantities given in 8.5 by any suitable method. The overall maximum error of the measurement of the power consumption shall not exceed 5 %. 7.1.1 Voltage circuits The active and apparent power consumption in each voltage circuit of a meter at reference voltage, reference temperature and r

43、eference frequency shall not exceed the values shown in Table 1. Table 1 Power consumption in voltage circuits for single-phase and polyphase meters including the power supply Meters Power supply connected to the voltage circuits Power supply not connected to the voltage circuits Voltage circuit 2 W

44、 and 10 VA 0,5 VA Auxiliary power supply 10 VA NOTE 1 In order to match voltage transformers to meters, the meter manufacturer should state whether the burden is inductive or capacitive (for transformer operated meters only). NOTE 2 The above figures are mean values. Switching power supplies with pe

45、ak values in excess of these specified values are permitted, but it should be ensured that the rating of associated voltage transformers is adequate. NOTE 3 For multifunctional meters, see IEC 62053-61. 7.1.2 Current circuits The apparent power taken by each current circuit of a direct connected met

46、er at basic current, reference frequency and reference temperature shall not exceed the values shown in Table 2. The apparent power taken by each current circuit of a meter connected through a current transformer shall not exceed the value shown in Table 2, at a current value that equals the rated s

47、econdary current of the corresponding transformer, at reference temperature and reference frequency of the meter. Page6 EN6205323:2003 Table 2 Power consumption in current circuits Class of meter Meters 2 3 Single-phase and polyphase 5,0 VA 5,0 VA NOTE 1 The rated secondary current is the value of t

48、he secondary current indicated on the current transformer, on which the performance of the transformer is based. Standard values of maximum secondary current are 120 %, 150 % and 200 % of the rated secondary current. NOTE 2 In order to match current transformers to meters, the meter manufacturer sho

49、uld state whether the burden is inductive or capacitive (for transformer operated meters only). 7.2 Influence of short-time overcurrents Short-time overcurrents shall not damage the meter. The meter shall perform correctly when back to its initial working condition and the variation of error shall not exceed the values shown in Table 3. The test circuit shall