EN 60896-11-2003 en Stationary lead-acid batteries Part 11 Vented types - General requirements and methods of tests《固定式铅酸蓄电池 第11部分 开孔透气型 一般要求和试验方法 IEC 60896-11-2002 替代 EN 60896-1-1.pdf

《EN 60896-11-2003 en Stationary lead-acid batteries Part 11 Vented types - General requirements and methods of tests《固定式铅酸蓄电池 第11部分 开孔透气型 一般要求和试验方法 IEC 60896-11-2002 替代 EN 60896-1-1.pdf》由会员分享，可在线阅读，更多相关《EN 60896-11-2003 en Stationary lead-acid batteries Part 11 Vented types - General requirements and methods of tests《固定式铅酸蓄电池 第11部分 开孔透气型 一般要求和试验方法 IEC 60896-11-2002 替代 EN 60896-1-1.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests The European Standard EN 60896-11:2003 has the status of a British Standard ICs 29.220.20 BS EN 60896-1 1:2003 British st3 nda rd tg NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITT

2、ED BY COPYRIGHT LAW BS EN 60896-11:2003 National foreword This British Standard is the official English language version of EN 60896-11:2003. It is identical with IEC 60896-11:2002. It supersedes BS EN 60896-1:1992 which will be withdrawn on 2005-12-01. The UK participation in its preparation was en

3、trusted to Technical Committee PEL/21, Secondary cells and batteries, which has the responsibility to: - - aid enquirers to understand the text; present to the responsible internationaUEuropean committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed

4、; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in t

5、his document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online This publication does not purport to include all the necessary provisions of a co

6、ntract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Stratew Committee on Summary Of pages This document comprises a

7、 front cover, an inside front cover, the EN title page, 12 March 2003 pages 2 to 20, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. IDate I Comments O BSI 12 March 2003

8、 ISBN O 580 41365 9 EUROPEAN STANDARD EN 6089641 NORME EUROPENNE EUROPISCHE NORM January 2003 ICs 29.220.20 Supersedes EN 60896-1:1991 + A2:1992 English version Stationary lead-acid batteries Part 11 : Vented types - General requirements and methods of tests (I EC 60896-1 1 12002) Batteries stationn

9、aires au plomb Partie 11 : Batteries au plomb du type ouvert - Prescriptions gnrales et mthodes dessai (CE1 60896-1 112002) Ortsfeste Blei-Akkumulatoren Teil 1 1 : Geschlossene Batterien - Allgemeine Anforderungen und P rfve ra h ren (IEC 60896-1 1 12002) This European Standard was approved by CENEL

10、EC on 2002-1 2-01. CENELEC members are bound to comply with the CENICENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standar

11、ds may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notifi

12、ed to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,

13、 Slovakia, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels O 2003 CENELEC - All r

14、ights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60896-1 1:2003 E Page 2 EN 60896-112003 Foreword The text of document 21/572/FDIS, future edition 1 of IEC60896-11, prepared by IECTC21, Secondary cells and batteries, was submitted to the IEC-CENE

15、LEC parallel vote and was approved by CENELEC as EN 60896-1 1 on 2002-12-01. This European Standard supersedes EN 60896-1 :I991 + A2:1992. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endo

16、rsement - latest date by which the national standards conflicting with the EN have to be withdrawn Annexes designated “normative“ are part of the body of the standard. Annexes designated “informative“ are given for information only. In this standard, annex ZA is normative and annex A is informative.

17、 Annex ZA has been added by CENELEC. Endorsement notice (dop) 2003-09-01 (dow) 2005-12-01 The text of the International Standard IEC 60896-1 1 :2002 was approved by CENELEC as a European Standard without any modification. Page 3 EN 60896-112003 CONTENTS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1

18、9 20 21 22 23 24 Scope and object 4 Normative references . 4 Definitions 5 Mechanical strength . 5 Electrolyte levels 5 Electrolyte reserve 5 Capacity . 6 Suitability for floating battery operation . 6 Endurance 7 Charge retention . 7 Short-circuit current and internal resistance 8 Accuracy of measu

19、ring instruments 8 Preparation of cells and batteries for testing . 9 Capacity test 9 Test of suitability for floating battery operation . 11 Endurance in discharge-charge cycles 12 Endurance in overcharge 12 Charge retention test 13 Short-circuit current and internal resistance determination 13 Tes

20、t sequence 15 Cell and battery markings . 15 Information to be included on the cell or monobloc package . 16 Recommended information for the battery room . 16 Marking of polarity 16 Annex A (informative) Recommended tests 17 Annex ZA (normative) Normative references to international publications wit

21、h their corresponding European publication . 20 Figure 1 . Discharge characteristic U =AI) . 14 Figure 2 . Typical test circuit 15 Table 1 . Test sequence recommended for type tests . 15 Table A.l . Recommended use of tests for stationary battery applications . 18 Table A.2 . Recommended use of test

22、s appropriate to types of stationary cells and batteries . 19 Page 4 EN 60896-112003 STATIONARY LEAD-ACID BATTERIES - Part 11: Vented types - General requirements and methods of tests 1 Scope and object This part of IEC 60896 is applicable to lead-acid cells and batteries which are designed for serv

23、ice in fixed locations (.e. not habitually to be moved from place to place) and which are permanently connected to the load and to the d.c. power supply. Batteries operating in such a p p I i ca t i o n s a re ca I I e d “s ta t i o n a r y batter i e s I. Any type or construction of lead-acid batte

24、ry may be used for stationary battery applications. This part 11 of the standard is applicable to vented types only. The object of this standard is to specify general requirements and the main characteristics, together with corresponding test methods associated with all types and construction modes

25、of lead-acid stationary batteries, excluding valve-regulated types. Recommendations on the use of tests for stationary battery application are given in Table A.1. Recommendations relating the type of cell or monobloc to the use of tests are given in Table A.2. Statements and claims of basic performa

26、nce data by the manufacturer shall correspond to those tests. The tests may also be used for type qualification. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated referen

27、ces, the latest edition of the referenced document (including any amendments) applies. I EC 60050( 151 ), international Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices IEC 60051 (all parts), Direct acting indicating analogue electrical measuring instruments and their ac

28、cessories I EC 60359, Electrical and electronic measurement equipment - Expression of performance IEC 60417 (all parts), Graphical symbols for use on equipment I EC 60485, Digital electronic d.c. voltmeters and d.c. electronic analogue-to-digital converters Page 5 EN 60896-112003 3 Definitions For t

29、he purposes of the present part of IEC 60896, the following definitions apply. 3.1 electrolyte reserve volume of electrolyte between minimum and maximum level indication 3.2 rated capacity quantity of electricity, declared by the manufacturer, which a cell or battery can deliver under specified cond

30、itions after a full charge. This value is usually expressed in ampere-hours (see crt I EV 486-03-22) 3.3 nominal capacity C,om suitable approximate quantity of electricity used to identify the capacity of a cell or battery. This value is usually expressed in ampere-hours (see IEV 486-03-21) 3.4 endu

31、rance ability of a cell or battery to function and withstand operations under specified conditions for a minimum period of time or repeated application thereof 4 Mechanical strength Stationary cells or batteries shall be designed to withstand mechanical stresses during normal transportation and hand

32、ling. Resistance to earthquakes, if required, shall be particularly specified. 5 Electrolyte levels 5.1 Each cell shall be equipped with a device to indicate the minimum and maximum electrolyte levels. 5.2 For containers made of translucent material, the minimum and maximum levels shall be indicated

33、 on the container wall. 5.3 For containers made of an opaque material, a gauge shall be provided indicating the position of the electrolyte level in relation to the minimum and maximum levels. 6 Electrolyte reserve 6.1 The electrolyte reserve (see 3.1), together with the battery design and the charg

34、ing method used, governs the frequency of inspections for electrolyte level readjustments. 6.2 For batteries in float operation (see 8.1) the minimum electrolyte reserve is specified in Item d) of 8.2. Page 6 EN 60896-112003 7 Capacity (Test, see Clause 14). 7.1 The essential characteristic of a sta

35、tionary cell or battery is its capacity for the storage of electric energy. This capacity, expressed in ampere-hours (Ah) varies with the conditions of use (discharge current and voltage, and temperature). The recommended t-values are: t = 240 h, 20 h, 10 h, 8 h, 5 h, 3 h, 2 h, 1 h, 0,5 h. From thes

36、e various C, values one value may be selected and declared as rated capacity C, (see 3.2). 7.2 The most commonly used values of t are between 10 h and 3 h. For these, the final voltage (end-of-discharge voltage) shall be U, = 1,80 V per cell (unless otherwise recommended or requested by the manufact

37、urer or user). For other discharge rates, the recommended value of U, shall be set by national standards or shall be stated by the manufacturer together with the value of C, or together with the particular performance data (see 7.5). 7.3 The discharge current corresponding to the rated capacity C, a

38、t the chosen reference temperature 20 “C or 25 “C is: to the final discharge voltage U, in accordance with 7.2. 7.4 The actual capacity Ca shall be determined by discharging a fully charged cell or battery in accordance with Clause 14. The resultant value shall be used for comparison with the rated

39、capacity C, stated by the manufacturer, or for control of the state of a battery after long periods of service. 7.5 The determination of the actual capacity Ca in accordance with Clause 14 may also be used for comparison with particular performance data indicated by the supplier. In this case the cu

40、rrent I, in 14.4 shall be substituted by the particular current corresponding to the relevant performance data. 8 Suitability for floating battery operation (Test, see Clause 15). 8.1 A battery in floating operation has a constant voltage U, permanently applied to its terminal which is sufficient to

41、 maintain it in a state close to full charge and is intended to supply a circuit whose normal power supply may fail. Suitability for this operation shall be checked by a test carried out on cells or on batteries. Stationary batteries are mainly used in floating operation Batteries which are not in t

42、rue floating operation (for example, solar power storage) should not be qualified according to the test method described in Clause 15. Page 7 EN 60896-112003 8.2 Batteries operating in continuous floating operation Batteries operating in continuous floating operation according to Clause 15 shall mee

43、t the following requirements: a) the electrolyte densities shall remain within specified limits in all cells; b) the individual cell voltages shall remain within specified limits; NOTE In some batteries with monobloc design the voltage of individual cells cannot be measured. In those cases the asses

44、sment of uniformity should be made with the voltage of individual monobloc units. c) after a period of six months the actual capacity Ca on discharge according to Clause 14 shall be at least equal to Crt; d) after a period of six months the loss of electrolyte shall not exceed 50 % of the volume bet

45、ween the minimum and maximum levels. The volume between the minimum and maximum levels shall be available from the manufacturer. 9 Endurance See definition 3.4. Depending on the battery and system application an endurance test based on discharge- charge cycles or an overcharge shall be carried out.

46、9.1 Endurance in cycles The endurance in discharge-charge cycles shall be tested according to Clause 16 where frequent discharges of the battery are to be encountered due either to a deliberate choice of operational application or to frequent power-line outages. The minimum requirement of the test s

47、hall be two sets of 50 cycles each (N = 100 cycles) before capacity drops below 0,95 CIO where CIO is the rated capacity at the 10 h-rate Optionally, the manufacturer may state the number of cycles as Ca = 0,8 . CIO. 9.2 Endurance in overcharge The endurance in overcharge shall be tested according t

48、o Clause 17 where natural overcharge related potential failure modes such as corrosion of grids, plate group bars or terminals of the battery are to be encountered due either to high ambient temperatures, poor float voltage regulation or similar. The minimum requirement of the test shall be six peri

49、ods of 720 h each before the capacity drops below 0,8 C where C is the rated capacity at the 1 h rate to U, as defined in Clause 7. 10 Charge retention Although, in the majority of cases, stationary batteries are on permanent charge, it is useful to establish their capability to retain charge by means of a test for cases where the battery may become electrically disconnected either normally or accidentally. Page 8 EN 60896-112003 The charge retention shall be determined according to Clause 18 and expressed as C, = per cent of the initial capacity Ca. The minimum val