EN 60335-2-83-2002 en Household and similar electrical appliances - Safety Part 2-83 Particular requirements for heated gullies for roof drainage (Incorporates Amendment A1 2008)《家.pdf

《EN 60335-2-83-2002 en Household and similar electrical appliances - Safety Part 2-83 Particular requirements for heated gullies for roof drainage (Incorporates Amendment A1 2008)《家.pdf》由会员分享，可在线阅读，更多相关《EN 60335-2-83-2002 en Household and similar electrical appliances - Safety Part 2-83 Particular requirements for heated gullies for roof drainage (Incorporates Amendment A1 2008)《家.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 60335-2-83:2002+A1:2008Household and similar electrical appliances Safety Part 2-83: Particular requirements for heated gullies for roof drainageICS 91.060.20 BS EN 60335-2-83:2002 +A1:2008Incorporating corrigendum May 2013BS EN 60335-2-83:2002+A1:2008This British Standard was

2、published under the authority of the Standards Policy and Strategy Committee on 25 November 2002 BSI 2008ISBN 978 0580 64088 9National forewordThis British Standard is the UK implementation of EN 60335-2-83:2002+A1:2008. It is identical with IEC 60335-2-83:2001, incorporating amendment 1:2008. It su

3、persedes BS EN 60335-2-83:2002, which will be withdrawn on 1 May 2013.The start and finish of textintroduced or altered by amendment is indicated in the text bytags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1isindicatedby!“

4、.The UK participation in its preparation was entrusted byTechnical Committee CPL/61, Safety of household and similar electrical appliances,to Subcommittee CPL/61/07, Safety of electric appliances, heated appliance group. A list of organizations represented on this subcommittee can be obtained on req

5、uest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments/corrigenda issued since publicationDate Comments

6、30 November 2008 Implementation of IEC amendment 1:2008 with CENELEC endorsement A1:2008to onorBS EN 60335-2-83:2002+A1:2008ISBN 978 0 580 82350 3Amendments/corrigenda issued since publicationDate Comments30 November 2008 Implementation of IEC amendment 1:2008 with CENELEC endorsement A1:200831 May

7、2013 Clauses 5 to 11.7 reinstated into document; page order correctedThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 25 November 2002 The British Standards Institution 2013. Published by BSI Standards Limited 2013This British Standard is the

8、UK implementation of EN 60335-2-83:2002+A1:2008. It is identical to IEC 60335-2-83:2001, incorporating amendment 1:2008. It supersedes BS EN 60335-2-83:2002, which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electr

9、ical appliances, to SubcommitteeCPL/61/7, Safety of electric appliances heated appliance group.NORME EUROPENNEEUROPISCHE NORM July 2008CENELECEuropean Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische NormungCentral

10、Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 60335-2-83:2002 EICS 91.060.20English versionHousehold and similar electrical appliances -SafetyPart 2-83: Particular requireme

11、nts for heated gulliesfor roof drainage(IEC 60335-2-83:2001)Appareils lectrodomestiques etanalogues - ScuritPartie 2-83: Rgles particulires pourles dispositifs lectriques de chauffagedes gouttires(CEI 60335-2-83:2001)Sicherheit elektrischer Gerte fr denHausgebrauch und hnliche ZweckeTeil 2-83: Beson

12、dere Anforderungen frbeheizbare Dachablufe(IEC 60335-2-83:2001)This European Standard was approved by CENELEC on 2002-02-01. CENELEC members arebound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard w

13、ithout any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German).Aversion in any otherlanguage

14、made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, German

15、y, Greece, Hungary,Iceland, Ireland, Italy, Luxembourg, Malta,Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.EN 60335-2-83:2002+A1EUROPEAN STANDARDForewordThe text of document 61/2056/FDIS, future first edition of IEC 60335-2-83, prepared by the IEC TechnicalC

16、ommittee 61, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC asEN 60335-2-83 on 2002-02-01.The following dates are applicable:-latest date by which the EN has to be implementedat national level by publication of an identicalnational standard or by endorsement (dop) 2003-07

17、-01-date on which national standardsconflicting with the EN have to be withdrawn(dow)2005-02-01This part 2 has to be used in conjunction with EN 60335-1, Safety of household and similar electricalappliances, Part1: General requirements. It was established on the basis of the 2002 edition of thatstan

18、dard. Amendments and revisions of Part1 have also to be taken into account and the dates whensuch changes become applicable will be stated in the relevant amendment or revision of Part 1.This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into theEuropean

19、 Standard: Safety requirements for electric heated gullies for roof drainage.When a particular subclause of Part1 isnot mentioned in this part 2, that subclause applies as far as isreasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text ofPart 1 is to be

20、adapted accordingly.NOTE 1 The following numbering system is used:-subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;-unlessnotes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in areplaced cl

21、ause or subclause;-additional annexes are lettered AA, BB, etc.Subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z.NOTE 2 The following print types are used:- requirements: in roman type;- test specifications: in italic type;-notes: in small

22、roman type.Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated nounare also in bold.There are no special national conditions causing a deviation from this European Standard, other thanthose listed in annex ZA to EN 60335-1.Ther

23、e are no national deviations from this European Standard, other than those listed in annex ZB toEN 60335-1._Page 2BS EN 60335-2-83:2002+A1:2008EN 60335-2-83:2002+A1:2008The text of document 61/3536/FDIS, future amendment 1 to IEC 60335-2-83:2001, prepared byIEC Technical Committee 61, Safety of hous

24、ehold and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60335-2-83:2002 on 2008-05-01.The following dates are applicable: latestdate by which the amendment has to beimplemented at national level bypublication ofan iden

25、tical national standard or by endorsement (dop) 2009-02-01 date on which national standards conflicting with the amendment have to be withdrawn(dow) 2013-05-01This amendment supplements or modifies the corresponding clauses of EN 60335-2-83:2002.There are no special national conditions causing a dev

26、iation from this amendment. There are no national deviations from this amendment. _Endorsement noticeThe text of amendment 1:2008 to the International Standard IEC 60335-2-83:2001 was approved byCENELEC as an amendment to the European Standard without any modification. _Page 3BS EN 60335-2-83:2002+A

27、1:2008IntroductionAn investigation by CENELEC TC 61 has shown that all risks from products within the scope of thisstandard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanicalmoving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, h

28、as shown thatthe risks are mainly of electrical origin and consequently this directive is not applicable. However,therelevant essential safety requirements of the Machinery Directive are covered by this standard togetherwith the principal objectives of the Low Voltage Directive._Endorsement noticeTh

29、e text of the International Standard IEC 60335-2-83:2001 was approved by CENELEC as a EuropeanStandard without any modification._In the Bibliography, add the following note to the standard mentioned:ISO 13732-1 NOTE Harmonized as EN ISO 13732-1:2006 (not modified).Foreword to amendment A1 EN 60335-2

30、-83:2002+A1:2008ACZ xennn(oamritve)tamroNivefer et secneroi ntetanrilanolbup itacisnowitht hieidnopserroc rlbup naeporuE gnitacisnonoitiddA:cilbuPnoita Yrae iTtleDH/NE Yrae-86006 CEI-225 -)1rivnEmnoset latnet- gniPatr2 :T etsT - setsK b:S altm its,yc lcic(smuidoc hrolis edo)noitul-86006 NE-2256991)2

31、_)1tadnu fer deecnere)2lav idide tita notad fo ei ssuePage 4BS EN 60335-2-83:2002+A1:2008EN 60335-2-83:2002+A1:2008CONTENTSINTRODUCTION.61Scope.72Normative references.73Definitions74General requirement.75General conditions forthe tests86Classification87Marking and instructions.88Protection againstac

32、cess to live parts89Starting of motor-operated appliances810 Power input and current811 Heating.812 Void .913 Leakage current and electric strength at operating temperature914 Transient overvoltages .915 Moisture resistance916 Leakage current and electric strength.917 Overload protection of transfor

33、mers andassociated circuits.918 Endurance919 Abnormal operation 920 Stabilityand mechanical hazards921 Mechanical strength .1022 Construction.1023 Internal wiring.1024 Components.1025 Supply connection and external flexible cords1026 Terminals for external conductors.1027 Provision for earthing.1128

34、 Screws and connections.1129 Clearances, creepage distancesand solidinsulation1130 Resistanceto heat and fire.1131 Resistance to rusting1132 Radiation, toxicity and similar hazards11Annexes.12Bibliography 12Page 5BS EN 60335-2-83:2002+A1:2008EN 60335-2-83:2002+A1:2008INTRODUCTION It has been assumed

35、 in thedrafting of this International Standard that the execution ofitsprovisions is entrusted to appropriately qualified and experienced persons.This standardrecognizesthe internationally accepted levelof protection against hazardssuchas electrical, mechanical, thermal,fire and radiation of applian

36、ces when operated as in normal use taking intoaccount the manufacturers instructions. It also coversabnormalsituations thatcan be expectedinpractice and takes into account the way in whichelectromagnetic phenomena can affect the safe operation of appliances.This standard takes into accountthe requir

37、ements of IEC 60364 as far as possible sothatthere is compatibilitywith the wiring ruleswhen the appliance is connected to the supply mains. However, national wiring rules may differ.If an appliance within the scope of this standard also incorporates functions that are coveredfar as is reasonable. I

38、f applicable, the influence of one function on the other is taken into account.An appliance that complieswith the text of this standard will not necessarily be considered to comply with the safetyprinciples of the standard if, when examined and tested,itis found tohave other features that impair the

39、 level of safetycovered bythese requirements.An appliance employing materials or having forms of construction differing from those detailedin the requirements of this standard may be examined and testedaccordingto theintentofthe requirements and, if foundtobe substantially equivalent, may be conside

40、red to complywith the standard. in Part1, Part 1 applies. NOTE 1 not necessary to specify particular requirements for the appliance in question over and above the generalrequirements.This standard isa product family standard dealing with the safety of appliancesand takesprecedence over horizontal an

41、dgeneric standards covering the same subject.NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken intoconsideration when developing the general and particular requirements for the IEC 60335 series of standards. Forexample, in the case of temperature

42、 requirements for surfaces on many appliances, generic standards, such asPage 6BS EN 60335-2-83:2002+A1:2008by another Part 2 of IEC 60335, the relevant Part 2 is applied to each function separately, asWhen aPart 2 standard does notincludeadditional requirements to coverhazards dealt withThis means

43、that the technical committees responsible for the Part 2 standards have determined that it isISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 orPart 2 standards.EN 60335-2-83:2002+A1:2008HOUSEHOLDAND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-83: Particular requirements for he

44、ated gullies for roofdrainage1 ScopeThis clause of part 1 is replacedby:This international standard deals with the safety of electrically heatedgullies forde-icing theinlet of the drainage system of flat roofs, balconies, and similar structures, their rated voltagebeing not more than 250 V.As far as

45、 ispracticable, thisstandard deals with the common hazards presented byapplianceswhich are encountered by all persons in and around the home. However, ingeneral, it does not take into accountNOTE 101 Attention is drawn to the fact that in many countries additional requirements are specified by thena

46、tional health authorities, the national authorities responsible for the protection of labour and similar authorities.NOTE 102 This standard does not apply to appliances intended to be used in locations where specialconditionsprevail, such as the presence of a corrosive or explosive atmosphere (dust,

47、 vapour or gas).2 Normative referencesThis clause of part1 is applicable except as follows.Addition:IEC 60068-2-52:1996, Environmental testing Part 2:Tests TestKb: Saltmist, cyclic(sodium chloride solution).3 DefinitionsThis clause of part1 is applicable except as follows.3.1.9 Replacement:normal op

48、erationoperation of the appliancewith a layerof thermal insulation having a thermal resistance of1,25 m2 K/W 0,3 m2 K/W covering the top surface4 General requirementThis clause of part 1 isapplicable.persons (including children) whose physical, sensory or mental capabilities; or lack of experience a

49、nd knowledge prevents them from using theappliance safely without supervision orinstruction; children playing with the appliance.!“!“Page 7BS EN 60335-2-83:2002+A1:2008EN 60335-2-83:2002+A1:200821 MechanicalstrengthThis clause of part1 is applicable except as follows.Addition:The test is also conducted at an ambient temperatureof 25C.22 Construc