EN 60335-2-60-2003 en Household and similar electrical appliances C Safety Part 2-60 Particular requirements for whirlpool baths and whirlpool spas (Incorporates Amendment A12 2010.pdf

《EN 60335-2-60-2003 en Household and similar electrical appliances C Safety Part 2-60 Particular requirements for whirlpool baths and whirlpool spas (Incorporates Amendment A12 2010.pdf》由会员分享，可在线阅读，更多相关《EN 60335-2-60-2003 en Household and similar electrical appliances C Safety Part 2-60 Particular requirements for whirlpool baths and whirlpool spas (Incorporates Amendment A12 2010.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 60335-2-60: 2003+A12:2010 Household and similar electrical appliances Safety Part 2-60: Particular requirements for whirlpool baths and whirlpool spas ICS 97.180 National foreword This British Standard is the UK implementation of EN 60335-2-60:2003+A12:2010. It is derived from

2、 IEC 60335-2-60:2002, incorporating amendments 1:2004 and 2:2008. It supersedes BS EN 60335-2-60:2003+A2:2008 which will be withdrawn on 1 August 2013. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. Tags indicating changes to IEC text carry the n

3、umber of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“. Where a common modification has been introduced by CENELEC amendment, the tags carry the number of the amendment. For example, the common modifications introduced by CENELEC amendment A11 are indicated by hi

4、. The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/07, Safety of electrical appliances heated appliance group. A list of organizations represented on this subcommittee can be obtained on

5、 request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 60335-2-60:2003+A12:2010 This British Standar

6、d was published under the authority of the Standards Policy and Strategy Committee on 28 July 2003 BSI 2010 Amendments/corrigenda issued since publication Amd. No. Date Comments 15721 March 2006 Implementation of IEC amendment 1:2004 with CENELEC endorsement A1:2005 30 June 2009 Implementation of IE

7、C amendment 2:2008 with CENELEC endorsement A2:2008 30 November 2010 Implementation of CENELEC amendments A11:2010 and A12:2010 ISBN 978 0 580 66958 3EUROPEAN STANDARD EN 60335-2-60 NORME EUROPENNE EUROPISCHE NORM CENELEC European Committee for Electrotechnical Standardization Comit Europen de Norma

8、lisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. ICS 13.120; 97.170 Supersedes EN 60335-2-60:1997 Englis

9、h version Household and similar electrical appliances Safety Part 2-60: Particular requirements for whirlpool baths and whirlpool spas Appareils lectrodomestiques et analogues Scurit Partie 2-60: Rgles particulires pour les baignoires systme de brassage deau (CEI 60335-2-60:2002) Sicherheit elektris

10、cher Gerte fr den Hausgebrauch und hnliche Zwecke Teil 2-60: Besondere Anforderungen fr Sprudelbadgerte (IEC 60335-2-60:2002) Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This Eu

11、ropean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. (IEC 60335-2-60:20

12、 This European Standard was approved by CENELEC on 2003-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Ref. No. EN 60335-2-60:2003 E CENELE

13、C members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Sw

14、itzerland and United Kingdom. :2003+A12 02) January 2010Foreword The text of the International Standard IEC 60335-2-60:2002 (61/2223/FDIS), prepared by IEC Technical Committee 61, was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 60335-2-60 on 2003-05-01. This Europe

15、an Standard replaces EN 60335-2-60:1997. The following dates are applicable: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-05-01 - date on which national standards conflicting with the EN have to be

16、 withdrawn (dow) 2006-05-01 This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 have also to be taken into

17、account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition“, “modification“ or “re

18、placement“, the relevant text of Part 1 is to be adapted accordingly. NOTE 1 The following numbering system is used: - subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; - unless notes are in a new subclause or involve notes in Part 1, they are numb

19、ered starting from 101, including those in a replaced clause or subclause; - additional annexes are lettered AA, BB, etc.; - subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. NOTE 2 The following print types are used: - requirements: in ro

20、man type; - test specifications: in italic type; - notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no special national conditions causing a deviation from this Eu

21、ropean Standard, other than those listed in Annex ZA to EN 60335-1. There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. _ This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European St

22、andard: Safety requirements for electric whirlpool baths and whirlpool spas.Page 2 BS EN 60335-2-60:2003+A12:2010 EN 60335-2-60:2003+A12:2010 (E)Introduction An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltag

23、e Directive, 73/23/EEC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requirements

24、 of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of the International Standard IEC 60335-2-60:2002 was approved by CENELEC as a European Standard without any modification. _ Foreword to amendme

25、nt A1 The text of document 61/2742/FDIS, future amendment 1 to IEC 60335-2-60:2002, prepared by the IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60335-2-60:2003 on 2

26、005-02-01. The following dates are applicable: - latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2005-11-01 - date on which national standards conflicting with the amendment have to be withdrawn (dow)

27、 2008-02-01 This amendment supplements or modifies the corresponding clauses of EN 60335-2-60:2003. There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. _ Endorsement notice The text of amendment 1:2004 to the Interna

28、tional Standard IEC 60335-2-60: 2002 was approved by CENELEC as an amendment to the European Standard without any modification. _ Page 3 BS EN 60335-2-60:2003+A12:2010 EN 60335-2-60:2003+A12:2010 (E)Foreword to amendment A2 The text of document 61/3641/FDIS, future amendment 2 to IEC 60335-2-60:2002

29、, prepared by IEC TC 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A2 to EN 60335-2-60:2003 on 2008-08-01. The following dates are applicable: - latest date by which the amendment has to be implement

30、ed at national level by publication of an identical national standard or by endorsement (dop) 2009-05-01 - date on which national standards conflicting with the amendment have to be withdrawn (dow) 2013-08-01 This amendment supplements or modifies the corresponding clauses of EN 60335-2-60:2003. The

31、re are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. _ Endorsement notice The text of amendment 2:2008 to the International Standard IEC 60335-2-60:2002 was approved by CENELEC as an amendment to the European Standard wi

32、thout any modification. _ Foreword to amendment A11 This amendment to the European Standard EN 60335-2-60:2003 was prepared by the Technical Committee CENELEC TC 61, Safety of household and similar electrical appliances. Document CLC/TC61(ES)0079 was discussed during the Malaga meeting of CENELEC TC

33、 61 in June 2007, when it was decided to submit a draft for an amendment to the formal vote. The draft was circulated in January 2009 and was approved by CENELEC as amendment A11 to EN 60335-2-60:2003 on 2009-11-01. Attention is drawn to the possibility that some of the elements of this document may

34、 be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement

35、 (dop) 2010-11-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2012-11-01 _ Foreword to amendment A12 This amendment to the European Standard EN 60335-2-60:2003 was prepared by the Technical Committee CENELEC TC 61, Safety of household and sim

36、ilar electrical appliances. A proposal for this amendment was discussed during the Kista meeting of CENELEC TC 61 in June 2008, when it was decided to submit a draft for an amendment to the Unique Acceptance Procedure. The draft was circulated in November 2008 and was approved by CENELEC as amendmen

37、t A12 to EN 60335-2-60:2003 on 2009-11-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by

38、 which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-11-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2010-11-01 _ Page 4 BS EN 60335-2-60:2003+A12:2010 EN

39、 60335-2-60:2003+A12:2010 (E)CONTENTS INTRODUCTION 6 1 Scope 7 2 Normative references. 8 3 Definitions . 8 4 General requirement 8 5 General conditions for the tests . 8 6 Classification . 8 7 Marking and instructions 9 8 Protection against access to live parts. 9 9 Starting of motor-operated applia

40、nces . 9 10 Power input and current. 9 11 Heating 9 12 Void 10 13 Leakage current and electric strength at operating temperature10 14 Transient overvoltages. 10 15 Moisture resistance. 16 Leakage current and electric strength .10 17 Overload protection of transformers and associated circuits10 18 En

41、durance 10 19 Abnormal operation.10 20 Stability and mechanical hazards11 21 Mechanical strength11 22 Construction .11 23 Internal wiring.12 24 Components .12 25 Supply connection and external flexible cords.13 26 Terminals for external conductors.13 27 Provision for earthing1 28 Screws and connecti

42、ons .13 29 Clearances, creepage distances and solid insulation 13 30 Resistance to heat and fire .13 31 Resistance to rusting 13 32 Radiation, toxicity and similar hazards13 Annexes14 Bibliography14 10 3 3 . Page 5 BS EN 60335-2-60:2003+A12:2010 EN 60335-2-60:2003+A12:2010 (E)INTRODUCTION It has bee

43、n assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when t

44、he appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable

45、. If applicable, the influence of one function on the other is taken into account. An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that i

46、mpair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equiva

47、lent, may be considered to comply with the standard. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions.

48、It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. When a part 2 standard does not include additional requirements to cover hazards dealt with in Part 1, Part 1 applies. NO

49、TE 1 This means that the technical committees responsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requirements. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the s